B-2 1333ND21QNB610057.docx

MAINTENANCE FOR NCNR COOLING TOWER ROLLING DOORS/ 1333ND21QNB610057

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES FOR CERTAIN COMMERCIAL ITEMS UNDER THE AUTHORITY OF FAR 13.

This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-02, dated November 23, 2020.

1352.215-72 INQUIRIES (APR 2010)

Offerors must submit all questions concerning this solicitation in writing to both the Contract Specialist Joni Laster at joni.laster@nist.gov and the Contracting Officer Donald Collie at donald.collie@nist.gov Questions should be received no later than seven (7) calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will govern performance of the contract.

(End of Provision)

The associated North American Industrial Classification System (NAICS) code for this procurement is 238290, with a small business size standard of 16.5M.

This acquisition is being solicited 100% set-aside for small business.

BACKGROUND:

The National Institute of Standards and Technology (NIST) Center for Neutron Research (NCNR) requires maintenance of twelve (12) operator driven rolling doors installed on the hybrid cooling tower located Building 235 at the NIST Gaithersburg campus. The cooling tower was built in 2002. It is divided into three sections, or “cells”. Each cell is further subdivided into a “wet” and a “dry” section. Both have a pair of rolling doors that can be positioned to minimize the plume emanating from the structure. The original doors were just replaced in 2019. The new doors are CHI 6181, Flat Slat with Galvanized Tracks, 18ga Steel slats. The operators are Liftmaster GH503L5, ½ HP with N103 Type Wet Environment Package. Installed with Key Lockout Switches.

The NCNR requires maintenance service to include all labor, materials, equipment and parts to maintain the rolling doors so that they are consistently fully operational. The Contractor shall provide an annual maintenance service contract to include all labor, materials, equipment and parts to maintain the rolling doors so that they are consistently fully operational. This will include two (2) preventive maintenance service visits to inspect, adjust, lubricate, test and make repairs as needed; and be on call for as needed emergency repair services in accordance with the attached Performance Work Statement.

LIST OF ATTACHMENTS:

The following documents and forms are hereby provided as attachments. The purpose of these attachments is for reference and to provide specification requirements to the Contractor for quotation purposes only. Attachment #1: Performance Work Statement, Attachment #2: Zip File “CT Rolling Door Attachments”

OPTION LINE ITEMS (See FAR 52.217-7): Line items 0003, 0004, 0005, 0006, 0007, 0008, 0009 and 0010 are option line items. Offerors must provide a firm-fixed price for all option line items. Prices for option line items shall remain valid in accordance with the following:

Line Item 0003, Option Period I, end of Base Period through one-year thereafter;

Line Item 0004, Option Period I Miscellaneous for Parts and Repairs, end of Base Period through one-year thereafter;

Line Item 0005, Option Period II, end of Option Period I through one-year thereafter;

Line Item 0006, Option Period II Miscellaneous for Parts and Repairs, end of Option Period I through one-year thereafter;

Line Item 0007, Option Period III, end of Option Period II through one-year thereafter;

Line Item 0008, Option Period III Miscellaneous for Parts and Repairs, end of Option Period II through one-year thereafter;

Line Item 0009, Option Period IV, end of Option Period III through one-year thereafter;

Line Item 0010, Option Period IV Miscellaneous for Parts and Repairs, end of Option Period III through one-year thereafter;

The period of performance for all option line items shall be one year. The Government may exercise option line items, at its discretion, at any time prior to the expiration date of the period of performance of the base period or any option period. Options will be exercised by the issuance of a modification (Standard Form 30).

Responsible offerors shall provide pricing for all of the following line items.

LINE ITEM 0001 – BASE PERIOD: The Contractor shall provide all supervision, labor, material and equipment to perform semi-annual (spring and fall) maintenance on the 12 rolling doors in accordance with the attached Performance Work Statement.

LINE ITEM 0002- BASE PERIOD: Miscellaneous for Parts and Emergency Repairs and Labor Hourly Repair Rate: Regular Time (7:30am – 5:00pm): $______per hour Outside of normal Business hours: $______per hour Holidays: $_____per hour

LINE ITEM 0003 – OPTION PERIOD I: The Contractor shall provide all supervision, labor, material and equipment to perform semi-annual (spring and fall) maintenance on the 12 rolling doors in accordance with the attached Performance Work Statement.

LINE ITEM 0004- OPTION PERIOD I: Miscellaneous for Parts and Emergency Repairs and Labor Hourly Repair Rate: Regular Time (7:30am – 5:00pm): $______per hour Outside of normal Business hours: $______per hour Holidays: $_____per hour

LINE ITEM 0005 – OPTION PERIOD II: The Contractor shall provide all supervision, labor, material and equipment to perform semi-annual (spring and fall) maintenance on the 12 rolling doors in accordance with the attached Performance Work Statement.

LINE ITEM 0006 - OPTION PERIOD II: Miscellaneous for Parts and Emergency Repairs and Labor Hourly Repair Rate: Regular Time (7:30am – 5:00pm): $______per hour Outside of normal Business hours: $______per hour Holidays: $_____per hour

LINE ITEM 0007 – OPTION PERIOD III: The Contractor shall provide all supervision, labor, material and equipment to perform semi-annual (spring and fall) maintenance on the 12 rolling doors in accordance with the attached Performance Work Statement.

LINE ITEM 0008 - OPTION PERIOD III: Miscellaneous for Parts and Emergency Repairs and Labor Hourly Repair Rate: Regular Time (7:30am – 5:00pm): $______per hour Outside of normal Business hours: $______per hour Holidays: $_____per hour

LINE ITEM 0009 – OPTION PERIOD IV: The Contractor shall provide all supervision, labor, material and equipment to perform semi-annual (spring and fall) maintenance on the 12 rolling doors in accordance with the attached Performance Work Statement.

LINE ITEM 0010 - OPTION PERIOD IV: Miscellaneous for Parts and Emergency Repairs and Labor Hourly Repair Rate: Regular Time (7:30am – 5:00pm): $______per hour Outside of normal Business hours: $______per hour Holidays: $_____per hour

PAYMENT SCHEDULE:

The successful Contractor shall be paid on a monthly or quarterly basis, in arrears. Proper invoices shall be approved for payment if all services required to be completed within the billing period have been successfully completed. Invoices will not be approved for payment if services are pending or outstanding.

INSPECTION AND ACCEPTANCE:

Inspection and acceptance will be in accordance with FAR 52.212-4(a). Inspection will occur at NIST in Gaithersburg, MD. Equipment must be fully compliant to all minimum required specifications upon receipt before payment shall be authorized.

FAR 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS

INSTRUCTIONS:

System for Award Management (SAM) Registration

In accordance with FAR 52.204-7, offerors must be registered in the System for Award Management (www.sam.gov) at the time of quotation submission and shall continue to be registered until time of award, during performance, and through final payment of any resultant contract. Refusal to register shall forfeit award. Offerors shall provide their Dun and Bradstreet Number (DUNS number) for the Offeror’s active System for Award Management (SAM) registration. Offerors must have an active registration at www.SAM.Gov to receive an award.

DUE DATE FOR QUOTATIONS:

Offerors shall submit their electronic quotations, via email, so that NIST receives them not later than 12:00 pm Eastern Time on January 28, 2021. E-mail quotations shall be submitted directly to the Contract Specialist at joni.laster@nist.gov and the Contracting Officer at Donald.collie@nist.gov.

Please reference the RFQ number in the subject line of email communications. 0fferors quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above.

Addendum to FAR 52.212-1, Quotation Preparation Instructions:

Quotation Preparation Instructions: Technical Quotation (Vol. I), Experience (Vol. II), Past Performance/References (Vol. III), Price Quotation (Vol. IV), Terms and Conditions (Vol. V) Quotations shall be clearly and concisely written as well as being neat, indexed (cross-indexed as appropriate) and logically assembled. All pages of each part shall be appropriately numbered and identified with the name of the offeror, the date, and the solicitation number.

Incomplete quotations may be considered non-responsive and removed from further consideration. Quotations shall be clearly and concisely written as well as being neat, indexed (cross-indexed as appropriate) and logically assembled. All pages of each part shall be appropriately numbered and identified with the name of the offeror, the date, and the solicitation number.

Volume I - Technical Quotation:

The technical quotation shall address the following:

Technical Capability:

For the purpose of evaluation of Technical Capability, the technical quotation must include: -Documentation and/or product literature, which clearly demonstrates that the quoter will meet all maintenance requirements for all equipment; -Documentation that clearly demonstrates that quoted service personnel are trained and fully competent in the operation of covered equipment; -If the prime Contractor is proposing a subcontractor and/or consultant(s) to perform maintenance and support requirements, documentation which shows that the prime Contractor and the proposed subcontractor have an agreement which confirms that the subcontractor/consultant has agreed to work with the prime contractor to perform the work the subcontractor/consultant has been proposed to perform; -Documentation, which explains how service calls will be handled when the Government contacts the prime Contractor for service. The Government has no privity of contract with subcontractors.

Volume II – Experience:

The contractor shall provide two (2) project descriptions and types of equipment maintained, with model number if available, that involved providing maintenance services and emergency repair services for rolling doors under a maintenance/emergency repairs agreement within the last five (5) years.

Volume III – Past Performance/References:

The offeror shall provide past performance information regarding relevant contracts over the past three (3) years with Federal, state, or local governments, or commercial customers. A list of references, preferably at least 3, if available, to whom the same or similar services has been provided. The list of references shall include, at a minimum: 1. The name of the reference contact person and the company or organization; 2. The telephone number and email address of the reference contact person; 3. The contract or grant number, the amount of the contract and the address and the telephone number of the Contracting Officer if applicable; the date of delivery or the date services were completed and a description of the equipment sold to each reference. If the offeror has no relevant past performance, it may include a statement to that effect in its quotation. The government reserves the right to consider data obtained from sources other than those described by the offeror in its quotation.

Volume IV – Price:

The offeror shall provide a firm-fixed price, F.O.B. Destination price quotation for Annual Maintenance Services, and Miscellaneous Parts & Repairs with labor hour rates in accordance with the Performance Work Statement. The price shall include all work required by the Statement of Work.

Volume V - Terms and Conditions:

Offerors shall provide a completed copy of all provisions listed below:

1. FAR 52.204-17 Ownership or Control of Offeror (Jul 2016)

2. FAR 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Dec 2019)

3. FAR 52.204-26 Covered Telecommunications Equipment or Services-Representation (Dec 2019)

4. FAR 52.209-11 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (Feb 2016)

5. FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (Oct 2018)

6. FAR 52.222-52 Exemption form Application of the Service Contract Labor Standards to Contracts for Certain Services—Certification (May 2014)

Acceptance of Terms and Conditions (Addendum to FAR 52.212-1(b) (11)):

If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO).

Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an Offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation.

(End of provision)

The offeror shall submit one (1) copy of their entire quotation, electronically, via E-mail to joni.laster@nist.gov and Donald.collie@nist.gov. The pricing quotation shall be separate from any other portion of the quotation. The offeror shall propose a firm-fixed-price quotation for each CLIN. Price quotations shall remain valid for a period of 90 days from the date quotations are due.

FAR 52.212-2, EVALUATION - COMMERCIAL ITEMS (Oct 2014)

Evaluation Factors:

Award shall be made to the Offeror whose quotation offers the best value to the Government. The Government will evaluate quotations based on the following evaluation criteria:

Factor 1- Technical Capability Factor 2- Experience Factor 3- Past Performance Factor 4- Price

All non-price factors when combined are more important than price.

Basis for Award:

Factor 1- Technical Capability Technical capability will be evaluated to determine that: 1. The Contractor can perform all maintenance requirements identified in the Performance Work Statement; 2. The Contractor can provide service for all equipment identified in the statement of work; 3. The maintenance will be performed by technicians who are trained and fully competent in the operation of the covered equipment; 4. Offerors have an established business relationship with proposed subcontractors and/or consultants to perform the required work; and 5. The prime Contractor shall maintain an active role in the required work.

Factor 2- Experience:

Experience shall be evaluated to determine the degree of and relevance of experience the Contractor possesses in repairing the same or similar equipment. In determining best value, stronger consideration shall be given to Contractors who possess direct experience maintaining and repairing the same type of rolling doors.

Factor 3- Past Performance:

The Government will evaluate the Offeror’s past performance information to determine its relevance to the current requirements and the extent to which it demonstrates that the Offeror has successfully completed relevant contracts in the past three years. The Government will assign a neutral rating to Offerors with no relevant past performance information within the past three (3) years or for which past performance information was reasonably unavailable. The Government may also obtain past performance information from sources other than those provided by the Offeror in its quotation to complete its evaluation of this factor.

Factor 4- Price:

Price will be evaluated to determine that the total price is consistent with the technical portion of the quotation and is a fair and reasonable price to the Government.

(End of provision)

PROVISIONS AND CLAUSES:

The following provisions and clauses apply to this acquisition and are hereby incorporated by reference.

All FAR clauses may be viewed at https://www.acquisition.gov/browse/index/far All CAR clauses may be viewed at https://www.acquisition.gov/car

PROVISIONS

FAR 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation (Oct 2018) FAR 52.204-7, System for Award Management (Oct 2018) FAR 52.204-16, Commercial and Government Entity Code Reporting (Jul 2016) FAR 52.204-18 Commercial and Government Entity Code Reporting (Jul 2018) FAR 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Oct 2020) FAR 52.212-3 Offeror Representations and Certifications -- Commercial Items (Nov 2020) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v)) of this provision.

(a) Definitions. As used in this provision— "Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"— Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veteransor, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it □ is, □ is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that-

(i) It □ is, □ is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that-

(i) It □ is, □ is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It □ is, □ is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order11246-

(1) Previous contracts and compliance. The offeror represents that-

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that-

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products,i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item" "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(2) Foreign End Products:

[List as necessary]

Line Item: Country of Origin:

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(g)

(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements–Israeli Trade Act."

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

[List as necessary]

Line Item: Country of Origin:

(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product."

Other Foreign End Products:

[List as necessary]

Line Item: Country of Origin:

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Canadian End Products:

[List as necessary]

Line Item: Country of Origin:

(3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Canadian or Israeli End Products:

[List as necessary]

Line Item: Country of Origin:

(4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

[List as necessary]

Line Item: Country of Origin:

(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products:

[List as necessary]

Line Item: Country of Origin:

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals–

(1) □ Are, □ are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(2) □ Have, □ have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property;

(3) □ Are, □ are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and

(4) □ Have, □ have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds the threshold at 9.104-5(a)(2) for which the liability remains unsatisfied.

(i) Taxes are considered delinquent if both of the following criteria apply:

(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.

(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.

(ii) Examples.

(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights.

(C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment.

(D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code).

(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).]

(1) Listed end products.

(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.]

(i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.

(ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.

(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-

(1) □ In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) □ Outside the United States.

(k) Certificates regarding exemptions from the application of the Service Contract Labor Standards (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.]

(1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror □ does □ does not certify that–

(i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations;

(ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and

(iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers.

(2) Certain services as described in FAR 22.1003-4(d)(1). The offeror □ does □ does not certify that-

(i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations;

(ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii));

(iii) Each…