Attch 1 - Purchase Description.pdf
PDF 324 KB Posted
- Attached to
- Front-Load Aqueous Part Washer Federal contract opportunity
- Solicitation number
- W912LP-23-Q-1134
About this file
This document is an attachment to a solicitation requesting quotes for front-load aqueous part washers and associated items for the Iowa Army National Guard. The Iowa National Guard is seeking to procure three front-load part washers to be placed at Facility Maintenance Shops 01, 03, and 11. The part washers must meet minimum specifications including a 48-inch working height, 28-inch turntable diameter, 750-pound turntable load capacity, 5 HP pump motor, 110 GPM pump capacity at 50 PSI, 50-gallon sump capacity, and operating temperature between 150-170 degrees. The solicitation also requests twelve 5-gallon buckets of detergent and on-site operator training to be provided at each facility. The contractor will deliver, install, and train personnel on the part washers at the specified National Guard locations by the date to be provided in the award information.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attch 4 - Questions and Answers.pdf | ||
| CSS_W912LP-23-Q-1134.pdf | ||
| Attch 3 - Contractor Information and Pricing Tables.xlsx | XLSX spreadsheet | |
| Attch 2 - Provisions and Clauses.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1 – Purchase Description
Iowa National Guard
RFQ# W912LP-23-Q-1134
You are invited to submit a quote for front-load aqueous part washers and associated items to the Iowa National Guard, Camp Dodge Joint Maneuver Training Center, USPFO-P&C, Bldg.
3475, 7105 NW 70th Avenue, Johnston, IA 50131-1824.
The following items are required:
LINE ITEM #: 0001
ITEM: Front-Load Aqueous Part Washer QUANTITY / UNIT: 3 / Each DESCRIPTION: See salient characteristics below for specifications.
LINE ITEM #: 0002
ITEM: Detergent (5-Gallon Bucket) QUANTITY / UNIT: 12 / Each DESCRIPTION: See salient characteristics below for specifications.
LINE ITEM #: 0003
ITEM: Delivery, Installation, Operator Training QUANTITY / UNIT: 3 / Each DESCRIPTION: See salient characteristics below for specifications.
LINE ITEM #: 0004
ITEM: IUID Label QUANTITY / UNIT: 3 / Each DESCRIPTION: Part washers require an item Unique Identification label per DFARS
Clause 252.211-7003 – Item Unique Identification and Valuation.
Contractor is responsible for providing IUID labels at the time of delivery.
All specifications for the proposed part washer shall meet or exceed the salient characteristics described below.
SALIENT CHARACTERISTICS (specifications):
1. DESCRIPTION:
This description is for three front-load automatic aqueous part washers to be placed at FMS 01, 03, and 11. Part washers shall be rugged, high capacity using pressurized hot water and industrial detergent to clean parts.
2. FEATURES:
Front Load Parts Washer.
Commercial washing chamber roll in door.
Control panel with low-water indicator light, Automatic low-water shut off.
Built in oil skimmer (example: belt driven).
Programable wash-cycle timer, 24 hr. / 7-day heater and skimmer timers.
Rotating turntable with drive system.
Turn table on/off switch.
Vertical wash pump.
Heater: Electrical heating element with wash nozzle(s).
Retractable intermediate spray bar with jets or swing away spray bar for various parts heights.
Removable debris screen.
Two- tier turntable.
Drop in parts tree.
Small parts basket.
Fork accessible Chip Basket, with forklift accessibility for heavy duty equipment parts.
Automatic water fill.
3. SPECIFICATIONS:
Electrical specification (see delivery location for address):
o 1 each 240 V 1 phase (FMS 01) o 1 each, 240 V 3 phase 60HZ 25 amp (FMS 03) o 1 each 240 V 1 phase (FMS 11)
Equipment size specifications:
o Minimum 48” working height.
o Minimum 28” turntable diameter.
o Minimum 750-pound turntable load capacity.
o Minimum of 5 HP pump motor.
o Minimum 110-gallon pump minute (GPM) pump capacity at a minimum of 50 pounds per square inch (PSI).
o Minimum 50-gallon sump capacity.
o Operating temperature of between 150-170 degrees.
o Minimum 28” containment ring.
Parts washer will be reviewed for conformity to ensure standards meet Federal and Iowa applicable directive, regulation, safety, and environmental standards.
4. ADDITIONAL ITEMS:
Four (4) each, five (5) gallon buckets of detergent per location, total of twelve (12) 5-gallon buckets.
5. WARRANTY:
Shall include one-year on-site warranty that covers all parts and labor.
6. ON-SITE TRAINING:
Contractor shall provide one time operator training at location.
7. DELIVERY AND SET UP:
Contractor shall deliver, install, and train facility personnel on part washer procedures.
o Delivery shall be made to each location. Facilities have the capability to assist by unloading with a bobcat or forklift from truck and emplace in each facility.
o Installation of part washer at the facility shall be a direct connection to existing voltages/phases hookups. Review the electrical specifications in section-3 above to ensure system is properly installed to Federal and State of Iowa electrical and plumbing code.
o Upon completion of installation contractor shall provide on-site operator training for part washer at each of the three FMS facilities.
Delivery/Install/Training Address:
Facility POC information will be provided with award information.
o Qty: 1
FMS 1
7105 NW 70th Ave., Camp Dodge, Johnston, IA 50131, BLDG 2297
FMS 03
3200 2ND Mech Drive Sioux City, IA 51111
FMS 11
1659 Nelson Ave., Fort Dodge, IA 50501
////NOTHING FOLLOWS\\\\
File details come from the government source that posted it. Updated .