The file's text, extracted by GovTribe without its formatting.
ATTACHMENT #1
FA8751-20-Q-0046
ITEMS BELOW ARE ON A BRAND NAME OR EQUAL BASIS.
ITEM 1
Specifications must meet a minimum of the following specifications:
Description: Oscilloscope with at least two channels at 8 GHz bandwidth or greater Quantity: 1 computer control: Ethernet TCP/IP, with API for computer control Vertical resolution at 8 GHz: >= 10 bits RMS voltage noise at 1 mV/div and 8 GHz bandwidth: < 300 uV Ability to trigger capture a trace Ability to sync to 10 MHz reference Max memory depth: >= 50 Mpts per channel Channel input impedance: 50 Ohms Waveform capture rate: > 1000 wfms/sec Digital/logic channels: none needed Probe accessories: none needed
POTENTIAL ACCEPTABLE OPTIONS PROVIDED FOR REFERENCE ONLY- Note- Vendors are not restricted to the options below and may offer any equipment that meets a minimum of the above referenced specifications.
Keysight option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| DSOS804A |
| Keysight Infiniium S series Oscilloscope, 8 GHz, 4 channel |
OR
Tektronix option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| MSO64 |
| Tektronix oscilloscope, 6 series |
| 1a |
| 1 |
| MSO64-6-BW-8000 |
| 8 GHz Bandwidth |
| 1b |
| 1 |
| MSO64-RM5 |
| Rackmount kit |
| 1c |
| 1 |
| MSO64-A0 |
| North America power plug |
ITEM 2
Item must meet a minimum of the following specifications:
Specifications for spectrum analyzer:
Description: Spectrum analyzer Quantity: 1 Ethernet TCP/IP communication with computer, API for computer control Frequency range: 10 kHz to 26 GHz Minimum resolution: better than 10 Hz Triggering options: free run, line, external External frequency reference: 10 MHz sync Adjustable bandwidth: <10 Hz to 10 MHz (>8 steps) Zero span mode: yes Bandwidth accuracy: <=2% deviation from value Swept accuracy: +-0.25% x span + horizontal resolution FFT accuracy: +-0.10% x span + horizontal resolution Phase noise at 1 GHz (10 kHz offset): -110 dBc/Hz or better Adjustable attenuation: 0 dB and 10 dB (or something similar) Temperature stability (from 20C to 30C): factor of +-2x10^{-6} Aging rate: factor of +-1x10^{-6}/year Calibration accuracy: +-2x10^{-6} Input VSWR: <2 Displayed average noise level: better than -150 dBm/Hz Absolute accuracy (relative to amplitude reference) over full frequency range: better than +- 1 dB RF input connector: Type-N female, 50 Ohms Max input power: 30 dBm (1 W)
POTENTIAL ACCEPTABLE OPTIONS PROVIDED FOR REFERENCE ONLY - Note- Vendors are not restricted to the options below and may offer any equipment that meets a minimum of the above referenced specifications.
Keysight option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| N9000B |
| Keysight spectrum analyzer |
| 1a |
| 1 |
| N9000B-526 |
| Option: up to 26 GHz |
| 1b |
| 1 |
| N9000B-P26 |
| Preamplifier (26 GHz) |
Rohde Schwarz option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| FSV3030 |
| Rohde Schwarz spectrum analyzer |
| 1a |
| 1 |
| FSV3030-B4 |
| Precision frequency reference |
| 1b |
| 1 |
| FSV3030-B24 |
| RF-preamplifier |
Tektronix option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| RSA5126B |
| Tektronix spectrum analyzer 1 Hz to 26.5 GHz |
| 1a |
| 1 |
| RSA5126B-61 |
| Internal harddrive |
| 1b |
| 1 |
| RSA5126B-B25 |
| 25 MHz acquisition BW |
| 1c |
| 1 |
| RSA5126B-51 |
| Internal preamplifier to 26.5 GHz |
ITEM 3
Item must meet a minimum of the following specifications:
Description: Vector signal generator Quantity: 1 ethernet/LAN controllable sophisticated API for computer control Frequency range: <=250 kHz to >= 20 GHz Pulse modulation (turn on/off output): <30 ns pulse width Pulse modulation on/off ratio: better than 60 dB External I/Q inputs: >1.5 GHz bandwidth over full frequency range External frequency reference: 10 MHz input/output Alternate external frequency reference: 1 GHz input Temperature stability: <+- 30 Hz/GHz from 0 to 55 C Line voltage effects: <+-10 Hz/GHz External reference lock range: +-1 kHz/GHz CW amplitude accuracy: <=0.01 dB Temperature stability of amplitude: <= +-0.01 dB/C CW SSB absolute phase noise: better than -65 dBc/Hz (10 Hz from carrier, <10 GHz carrier) CW SSB absolute phase noise: better than -120 dBc/Hz (10 kHz from carrier, <10 GHz carrier) Rack mount accessory (add to quote as an optional item)
POTENTIAL ACCEPTABLE OPTIONS PROVIDED FOR REFERENCE ONLY - Note- Vendors are not restricted to the options below and may offer any equipment that meets a minimum of the above referenced specifications.
Keysight option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| E8267D |
| Keysight vector signal generator |
| 1a |
| 1 |
| E8267D-520 |
| 250 kHz to 20 GHz |
| 1b |
| 1 |
| E8267D-UNW |
| Narrow Pulse modulation |
| 1c |
| 1 |
| E8267D-UNY |
| Enhanced ultra-low phase noise performance |
| 1d |
| 1 |
| E8267D-016 |
| Wideband differential external I/Q inputs |
| 1e |
| 1 |
| E8267D-H1G |
| Provides 1GHz in and out to minimize phase drift for frequencies 250 kHz to 250 MHz |
| 1f |
| 1 |
| E8267D-H18 |
| Wideband modulation less than 3.2 GHz |
| 1g |
| 1 |
| E8267D-1C114A |
| Rack mount kit |
Rohde Schwarz option
| Item |
| Quantity |
| Part # |
| Description |
| 1 |
| 1 |
| SMW200A |
| Rohde Schwarz vector signal generator |
| 1a |
| 1 |
| SMW200A-B1020 |
| 100kHz to 20 GHz |
| 1b |
| 1 |
| SMW200A-B13XT |
| Wideband baseband main module two I/Q paths to RF |
| 1c |
| 1 |
| SMW200A-B90 |
| Phase coherence |
| 1d |
| 1 |
| SMW200A-K22 |
| Pulse modulator |
| 1e |
| 1 |
| SMW200A-K23 |
| High performance pulse generator |
| 1f |
| 1 |
| SMW200A-K703 |
| 100 MHz, 1GHz ultra low noise reference input/output |
| 1g |
| 1 |
| SMW200A -K711 |
| Ultra low phase noise for RF path A |
******In accordance with DFARS 252.211-7003, Line Item Numbers with a unit price ≥ $5,000, Vendors will be expected to supply Unique Item Identifier (UII/ UID) labels.