AttachmentA3678.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

INBOARD FLAP TRACK ASSEMBLY, WS 109.88 (A-10)

2. PART NUMBER:

160D611632-5

3. NATIONAL STOCK NUMBER:

1560-01-228-3678

PREPARED BY:

CASSIDY BOND

OFFICE SYMBOL:

416 SCMS/GUEAB

DATE:

4/11/2019

HILL AFB FORM 462 Page 1 of 1

4. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY RESEARCH THESE MANUALS, SPECIFICATIONS, AND STANDARDS AND

FULLY UNDERSTAND THE REQUIREMENTS NECESSARY FOR MANUFACTURE OF COMPONENT PARTS AND ASSEMBLIES. ALL

DEVIATIONS, MINOR AND MAJOR, FROM THE ENGINEERING TECHNICAL DATA PACKAGE SHALL BE SUBMITTED TO THE PROPER

A-10 ENGINEERING ORGANIZATION FOR COORDINATION AND APPROVAL.

5. WHEN MILITARY DOCUMENTS LISTED IN THE ENGINEERING DRAWING ARE CANCELLED THEY SHALL BE REPLACED BY THE

INDUSTRY EQUIVALENT DOCUMENT SPECIFIED ON THE MILITARY DOCUMENT'S CANCELLATION NOTICE. THE

CHARACTERISTICS OF TYPE, GRADE, CLASS, ETC. SPECIFIED IN THE CANCELLED MILITARY DOCUMENT SHALL BE MAINTAINED

OR EXCEED THOSE CHARACTERISTICS WHEN APPLYING THE INDUSTRY EQUIVALENT DOCUMENT(S). THE CONTRACTOR WILL

COORDINATE WITH THE PROPER A-10 ENGINEERING ORGANIZATION FOR AUTHORIZATION AND APPROVAL OF THESE

SUBSTITUTIONS PRIOR TO THE MANUFACTURING OF THIS COMPONENT. WHEN THERE IS NO LISTED REPLACEMENT THE

CONTRACTOR SHALL REQUEST AND RECOMMEND A SUBSTITUTE DOCUMENT FROM THE PROPER A-10 ENGINEERING

ORGANIZATION BY CONTACTING THE GOVERNMENT CONTRACTING OFFICIAL.

6. USE OF NORTHROP GRUMMAN SPECIFICATION Z-R701 IN CONJUNCTION WITH MIL-STD-130 IS MANDATORY TO ENSURE THE

PROPER MARKING OF THE PARTS. (Z-R701 HAS UNLIMITED DATA RIGHTS IN JEDMICS)

7. "IUID" (ITEM UNIQUE IDENTIFIER) IS REQUIRED IAW MIL-STD-130. SPECIFIC INSTRUCTIONS FOR MARKING METHODS, LOCATION, CONTENT AND FORMAT SHALL BE SPECIFIED BY THE CONTRACTOR AND SUBMITTED TO THE GOVERNMENT FOR APPROVAL

PRIOR TO CONTRACT DELIVERY. THE CONTRACTOR MUST DEMONSTRATE THE MARKING DOES NOT ADVERSELY AFFECT ITEM

INTEGRITY OR PERFORMANCE AND WILL REMAIN READABLE AND ATTACHED THROUGHOUT THE USEABLE LIFE OF THE ITEM.

IUID IS REQUIRED FOR ITEMS WHERE THE INDIVIDUAL COST PER UNIT IS GREATER THAN $5,000 OR IF THE ITEM HAS BEEN

IDENTIFIED AS FATIGUE CRITICAL REGARDLESS OF THE ITEMS PER UNIT COST.

8. USE OF ANY PROCESS OR MANUFACTURING TECHNIQUE WHICH CREATES A NET EDGE ON A METALLIC PART BY RELYING ON

HEAT AT OR ABOVE THE PARTS MELTING POINT TO PRODUCE THE CUT IS NOT GENERALLY AUTHORIZED (I.E. LASER CUTTING, ELECTRICAL DISCHARGE MACHINE (EDM), PLASMA CUTTING, ETC.) WITHOUT PRIOR A-10 SYSTEM PROGRAM OFFICE APPROVAL.

LIKEWISE, OTHER NON-HEAT GENERATING CUTTING PROCESSES INVOLVING HIGH PRESSURE FLUIDS AND SLURRIES (I.E., WATER JET) ARE ALSO NOT CURRENTLY APPROVED FOR USE IN THE PRODUCTION OF A-10 PARTS. ONLY THOSE PROCESSES

CONTROLLED BY A-10 APPROVED PROGRAM SPECIFICATIONS AND A-10 DRAWINGS ARE PERMITTED TO BE USED IN THE

MANUFACTURE OF A-10 PARTS AND ASSEMBLIES.

9. AS DEFINED BY THE CAD MODEL, THE POSITION TOLERANCE ON THE 5-.2525” DIAMETER HOLES IS .0010” AND THE HOLE

DIAMETER TOLERANCE IS .2525” TO .2530”.

10. 3-D MODELS ARE AVAILABLE AND REQUIRED FOR THE MANUFACTURE OF MULTIPLE COMPONENTS USED IN THIS ASSEMBLY.

NOTE THAT 3-D MODELS ARE NOT AVAILABLE FOR ALL PARTS. WHERE 3-D MODELS ARE REQUIRED AND AVAILABLE, THE

ASSOCIATED DRAWING IS NECESSARY FOR NOTES, TOLERANCES AND OTHER APPLICABLE CONFIGURATION DETAILS.

COMPONENTS, HARDWARE, AND OTHER PERTINENT DETAILS MAY NOT BE PRESENT IN ASSEMBLY MODELS; REFER TO THE

PARTS LIST AND DRAWING FOR CONFIGURATION DETAILS. 3-D MODELS ARE STORED IN THE TEAMCENTER REPOSITORY.

CONTACT THE APPROPRIATE A-10 DATA CONTROL ORGANIZATION THROUGH THE GOVERNMENT PROCURING AGENCY FOR THE

APPLICABLE FILES.

11. PART NUMBER 160D611632-5 SHALL BE SUPPLIED FULLY ASSEMBLED, NOT DELIVERED AS A KIT.

12. WARNING - THE DOCUMENTS LISTED ON THIS ENGINEERING DATA LIST (EDL) CONTAIN TECHNICAL DATA WHOSE EXPORT IS

RESTRICTIVE BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC, SECTION 2751, ET SEQ.), OR THE EXPORT ADMINISTRATION

ACT OF 1979, AS AMENDED, TITLE 50 U.S.C, APPEND 2401 ET SEQ. VIOLATORS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE

CRIMINAL PENALTIES.