AttachmentA.pdf
PDF 676 KB Posted
- Attached to
- LINER, COMBUSTION CH Federal contract opportunity
- Solicitation number
- SPRHA1-23-Q-0545
- Issued by
- Defense Logistics Agency Aviation
About this file
This document includes an engineering data requirements attachment and related federal contract opportunity solicitation. The engineering data requirements attachment provides specifications for the manufacture of a LINER, COMBUSTION CHAMBER for the F-16 aircraft, including the part number, national stock number, and requirements to apply unique identification labeling per the specified military standards. The related federal contract opportunity posted by the Defense Logistics Agency Aviation solicits proposals to provide LINER, COMBUSTION CHAMBERS as described in the attachments, with proposals due on an unspecified date.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| SPRHA123Q0545.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
LINER,COMBUSTION CH ( F-16)
2. PART NUMBER:
171924-200
3. NATIONAL STOCK NUMBER:
2835-01-329-2486RP
PREPARED BY:
MOSS LANCE
OFFICE SYMBOL:
419 SCMS/CL
DATE:
08/08/2017
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS, AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
OO-ALC ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
CONTROLLED UNCLASSIFIED INFORMATION (CUI) \\ – SEE DLAD 2.101 & SOURCE SELECTION INFORMATION \\ – SEE FAR 2.101 AND 3.104
File details come from the government source that posted it. Updated .