Attachment III - Statement of Work.pdf

Statement of Work

FY22 AV Tech Refresh US Fleet Forces Command (USFFC), Norfolk, Virginia

1. INTRODUCTION: This tasking is for the provision of audio and video peripheral equipment for a reduced

LCM plan for FY22. This requirement includes the purchase of Audio Visual equipment.

2. BACKGROUND: As a branch of the USFFC N6 Communication and Information Systems Directorate, the N612 mission is to provide useful state of the art Information Technology services. This mission is integral in support of the Strategic Priorities of the USFF: Readiness Output, Enterprise Management / Alignment, Execute Combatant Commander Demand, Capabilities / CONOPS and Workforce Character and Professionalism. The intended goal is to provide reliable state of the art AV and VTC systems that will provide service well into the future and integrate remote, net centric asset management and control of these systems.

Requirement is for a purchase of Audio Visual equipment for technical refresh integration for multiple Audio Visual and video teleconferencing spaces. This requirement is part of the N6 life cycle maintenance plan;

reduced in scope due to limited funding.

3. SCOPE: This Statement of Work specifies the equipment to be procured, and delivered to USFFC. The contractor shall provide a competitive bid for the items that meet or exceed the listed required specifications and in the quantities listed. There is no labor requirement in this request, only material.

In order to minimize the risk of the government purchasing counterfeit products or unauthorized secondary market equipment, which would not be supported by the Original Equipment Manufacturer (OEM), and to ensure that the Government purchases only equipment that is genuine (i.e., not counterfeit or gray market), authorized (e.g., including appropriate licenses), and supported (e.g., warranty and support services) by the OEM, Vendor shall certify that it is a Manufacturer Authorized Partner as of the date of the submission of their offer, and that it has the certification/specialization level required by the Manufacturer to support both the product sale and product pricing, in accordance with the applicable Manufacturer certification/specialization requirements. Unless otherwise specified, Vendor shall warrant that the products are new, in their original box.

By submitting a response to an Request for Quote (RFQ), Request for Proposal (RFP), the Vendor confirms to have sourced all Manufacturer products submitted in this offer from Manufacturer or through Manufacturer Authorized Partners only, in accordance with Manufacturer's applicable policies in effect at the time of purchase.

4. PLACE OF DELIVERY

USFFC HQ Shipping and Receiving, BLDG NH-35

PH: 757-836-1777

MARK FOR: Tony Wallace N612, Suite 250 1428 Blandy Road Norfolk VA 23551

5. PERIOD OF PERFORMANCE

12 Weeks ARO

6. REQUIREMENTS: (All items are brand name required)

PWS

Section

Brand Item Number Item Description

Qty Unit of Issue

6.2 Christie Digital SUHD553-L 55" Flat Panel Display 6.0 Ea.

6.3 Christie Digital SUHD863-L 86" Flat Panel Display 2.0 Ea.

6.4 Christie Digital SUHD983-P 98" Flat Panel Display 1.0 Ea.

6.5 Chief Display

Mount

LSM1U

Large Fusion Micro-Adjustable Wall Display Mount

4.0 Ea.

6.6 Chief Display

Mount

XSM1U

X-Large Fusion Micro-Adjustable Wall Display Mount

1.0 Ea.

6.7 BRG 6610C 5 Zone Multizone clock 2.0 Ea.

6.8 Cisco CS-CODEC-PLUS-K9 VTC Codec 3.0 Ea.

6.9 Crestron TS-1070-GV-B-S Control Panel Interface 3.0 Ea.

6.10 Crestron C2N-H BLOCK Multi-type Cresnet Distribution Block 1.0 Ea.

6.11 Crestron SSW-102-EL Wall Mount Sign 2.0 Ea.

6.12 Crestron AMP-2210T AMP-Commercial Power Amplifier 2.0 Ea.

6.13 Crestron PRO4 Control System Processor 2.0 Ea.

6.14 Biamp Tesira Forte DAN VT Digital Signal Processor 5.0 Ea.

6.15 Audio-Technica ES925C6/FM3 Cardioid Condenser Microphone 4.0 Ea.

6.16 Clock Audio CDT 100 MK3 UDP Version Dante audio microphone generator 1.0 Ea.

6.17 Extron DXP 1616 HD 4K PLUS DXP HD 4K Plus Matrix Switcher 2.0 Ea.

6.18 Extron 26-713-01 DisplayPort M-HDMI F Active, 6" 45.0 Ea.

6.19 Extron

HDMI Ultra Series 26-

663-06 6' foot HDMI male to male cable

30.0 Ea.

6.20 Extron HD Pro 26-726-35 35 foot HDMI male to male cable 15.0 Ea.

6.21 Extron HD Pro 26-726-50 50 foot HDMI male to male cable 10.0 Ea.

6.22 Extron HD Pro 26-726-75 75 foot HDMI male to male cable 10.0 Ea.

6.23 Tripp Lite B202-150 USB Extender over Cat 5/6 30.0 Ea.

6.24 Vadio 999-8215-000 Vadio AV USB Bridge Conference 2.0 Ea.

6.25 Middle Atlantic SS Shelf Sliding Rack Shelf 15.0 Ea.

6.26 Middle Atlantic C5-FF27-3 C5 Three bay Credenza 1.0 Ea.

6.27 Middle Atlantic PDC-915R-2 Power Distribution 6.0 Ea.

6.28 Middle Atlantic C5KH-VAR

C5 Credenza - 3 Bay HPL Sota Style in Black with Solid Doorblack locks, modern aluminum handles.

ACC-HANDLE1-MAH

ACCY HNDL,1 BAY,MOD ALUM (included) ACC-

LOCK1-BKH

ACCY LOCK,1 BAY,BLACK (included)

2.0 Ea.

6.2 Quantity 6: (Christie Digital SUHD553-L) 55” secure flat panel display

6.2.1 Direct Lit LED Backlight technology

6.2.2 4K Native resolution: UHD 3840 x 2160 (16:9)

6.2.3 No built in radios / RF capability of any type

6.2.4 TAA Compliant

6.2.5 Display orientation: Landscape only

6.2.6 LED lifespan • 50,000 hours to 50% brightness

6.2.7 Contrast Ratio: 4000:1

6.2.8 Pixel pitch: 0.372 x 0.372mm

6.2.9 Nominal bezel size: 21mm x 15mm

6.2.10 Inputs: 2 x HDMI (Ver 2.0, HDCP 2.2) • DisplayPort (Ver 1.2a, HDCP 1.3, supports a UHD signal at 30Hz only) • VGA • YPbPr • USB 3.0 • 2 x USB 2.0

6.2.11 Brightness (Typical): 400nits

6.2.12 Runtime 16 hours / 7 days a week

6.2.13 Embedded processing: only via OPS slot

6.2.14 VESA 400 x 200mm, M6

6.2.15 Warranty: Three years parts and labor limited warranty

6.2.16 Operating voltage: 100 – 240 VAC 50/60Hz

6.2.17 Power Consumption: 73 Watts typical

6.2.18 Size: (L x W x H): 57.4 x 33.1 x 3.8”

6.2.19 Weight: 54.5 lbs.

6.3 Quantity 2: (Christie Digital SUHD863-L) 86” secure flat panel display

6.3.1 Direct Lit LED Backlight technology

6.3.2 4K Native resolution: UHD 3840 x 2160 (16:9)

6.3.3 No built in radios / RF capability of any type

6.3.4 TAA Compliant

6.3.5 Display orientation: Landscape only

6.3.6 LED lifespan • 30,000 hours to 50% brightness

6.3.7 Contrast Ratio: 1,200:1

6.3.8 Pixel pitch: 0.493 x 0.493mm

6.3.9 Nominal bezel size: 19mm/19mm/19mm

6.3.10 Inputs: 4 x HDMI (Ver 2.0, HDCP 2.2) • DisplayPort (Ver 1.2 OPS)

6.3.11 Brightness (Typical): 450nits

6.3.12 Runtime 18/7 operation

6.3.13 Embedded processing: only via OPS slot

6.3.14 VESA 400 x 200mm, M6

6.3.15 Warranty: Three years parts and labor limited warranty

6.3.16 Operating voltage: 100 – 240 VAC 50/60Hz

6.3.17 Size: (L x W x H): 76.3 x 43.7 x 2.7”

6.3.18 Weight: 110 lbs.

6.4 Quantity 1: (Christie Digital SUHD983-P) 98” secure flat panel display. multi-window capability allows for UHD sources to be configured and simultaneously shown without the use of a multi-viewer or video wall processor.

6.4.1 Direct Lit LED Backlight technology

6.4.2 4K Native resolution: UHD 3840 x 2160 (16:9)

6.4.3 No built in radios / RF capability of any type

6.4.4 TAA Compliant

6.4.5 Display orientation: Landscape only

6.4.6 LED lifespan • 50,000 hours to 50% brightness

6.4.7 Contrast Ratio: 1,200:1

6.4.8 Pixel pitch: 0.57 x 0.57mm

6.4.9 Nominal bezel size: 19mm/19mm/19mm

6.4.10 Inputs: 4 x HDMI (Ver 2.0, HDCP 2.2) • DisplayPort (Ver 1.4) OPS

6.4.11 Brightness (Typical): 500nits

6.4.12 Runtime 24/7 operation

6.4.13 Embedded processing: only via OPS slot

6.4.14 VESA 800 x 400mm, M8

6.4.15 Warranty: Three years parts and labor limited warranty

6.4.16 Operating voltage: 100 – 240 VAC 50/60Hz

6.4.17 Size: (L x W x H): 86.4 x 49.2 x 3.8”

6.4.18 Weight: 209.4 lbs.

6.5 Quantity 4: (Legrand Chief Display Mount LSM1U) Large fusion adjustable fixed wall display mount.

6.5.1 Lateral Shift: 17.4”

6.5.2 Manual Height Adjustment: 1”

6.5.3 Minimum Depth: 2”

6.5.4 Mounting Pattern Compatibility: 100 X 100 X 600

6.5.5 Shipping Weight: 19.37 Ibs.

6.5.6 Typical Screen Size: 42” – 86”

6.5.7 Wall Stud Compatibility In: 16” – 32”

6.5.8 Weight Capacity: 200 Ibs.

6.5.9 Orientation: Landscape

6.6 Quantity 1: (Legrand Chief Display Mount XSM1U) Extra Large fusion adjustable fixed wall display mount.

6.6.1 Lateral Shift: 21.4”

6.6.2 Manual Height Adjustment: 1”

6.6.3 Minimum Depth: 2.25”

6.6.4 Mounting Pattern Compatibility: 100 X 100 X 600

6.6.5 Shipping Weight: 11 KG

6.6.6 Typical Screen Size: 55” – 100”

6.6.7 Wall Stud Compatibility In: 24” – 42”

6.6.8 Weight Capacity: 250 Ibs.

6.6.9 Orientation: Landscape

6.7 Quantity 2: (BRG 6610C) 5 Zone digital clock.

6.7.1 OCXOA oscillator accurate to .06 seconds per year

6.7.2 1.8”, 2.5” or 4.0” red bar segment LEDs for displaying time* (blue & green optional)

6.7.3 1.2” or 2.0” red 15 character alpha numeric dot matrix LEDs for displaying zone names* (blue, green & yellow optional)

6.7.4 Zone flipping feature that allows up to 16 zones in a single clock

6.7.5 12 or 24 hour format

6.7.6 DST and time zone offsets supported

6.7.7 PC Interface: USB Interface

6.7.8 IR remote control standard or optional RF remote

6.7.9 Black brushed Aluminum frame

6.7.10 Multiple cord lengths available

6.7.11 US, British, Australian or European plugs

6.7.12 100-240 VAC. 50-60 cycle power

6.8 Quantity 3: (Cisco CS-CODEC-PLUS-K9) Codec Plus – TAA, NO RADIO

6.8.1 Software compatibility

6.8.1.1 Cisco Collaboration Endpoint Software Version 9.0 or later, or Cisco

Webex Room OS

6.8.2 Bandwidth

6.8.2.1 Up to 6 Mbps point-to-point

6.8.3 Minimum bandwidth for resolution/frame rate H.264

6.8.3.1 720p30 from 768 kbps

6.8.3.2 720p60 from 1152 kbps

6.8.3.3 1080p30 from 1472 kbps

6.8.3.4 1080p60 from 2560 kbps

6.8.4 Firewall traversal

6.8.4.1 Cisco Expressway™ technology

6.8.4.2 H.460.18, H.460.19 firewall traversal

6.8.5 Video standards

6.8.5.1 H.264, H.265, and H.263 for TANDBERG™ MXP interoperability only

6.8.6 Video inputs

6.8.6.1 One HDMI input supports formats up to maximum 1080p60

6.8.6.2 Two HDMI inputs support formats up to maximum 4K (3840 x 2160) at

30 fps including HD1080p60

6.8.6.3 Extended Display Identification Data (EDID)

6.8.6.4 Consumer Electronics Control (CEC) 2.0

6.8.7 Video outputs

6.8.7.1 Two HDMI outputs support formats up to 3840 x 2160p60 (4Kp60)

6.8.7.2 Consumer Electronics Control (CEC) 2.0

6.8.8 Encode and decode

6.8.8.1 Main video: Full HD 1080p60

6.8.8.2 Presentation channel: UHD 4K 2160p5, including 1080p30 and 720p60

6.8.9 Audio standards

6.8.9.1 G.711, G.722, G.722.1, G.729, AAC-LD, and Opus

6.8.10 Audio features

6.8.10.1 High-quality 20 kHz audio

6.8.10.2 Subwoofer line out for Quad Camera

6.8.10.3 Prepared for inductive loop (line out)

6.8.10.4 Automatic Gain Control (AGC)

6.8.10.5 Automatic noise reduction

6.8.10.6 Active lip synchronization

6.8.11 Audio inputs

6.8.11.1 Three microphones, 4-pin mini-jack

6.8.11.2 Embedded audio on two HDMI inputs

6.8.12 Audio outputs

6.8.12.1 1 line out mini-jack (stereo) (Codec Plus)

6.8.12.2 1 RCA output for subwoofer (Quad Camera)

6.8.12.3 Embedded audio on one HDMI output

6.8.12.4 HDMI input #1 supports Audio Return Channel (ARC): Audio output to

Quad Camera

6.8.13 Speakers (Quad Camera)

6.8.13.1 High-quality speakers

6.8.13.2 Frequency response: 70 Hz to 20 kHz

6.8.13.3 Max output level SPL 90dB

6.8.14 Speaker tracking (Quad Camera, SpeakerTrack 60)

6.8.14.1 6-element microphone array for accurate speaker tracking

6.8.15 Dual stream

6.8.15.1 H.239 (H.323) dual stream

6.8.15.2 Binary Floor Control Protocol (BFCP) (SIP) dual stream

6.8.15.3 Support resolutions up to 3840 x 2160p5 (4Kp5),1080p30 and 720p60

6.8.16 MultiSite features (embedded multipoint) (optional upgrade)

6.8.16.1 Adaptive SIP/H.323 MultiSite ◦ 3-way resolution up to 1080p30 + content up to 4Kp5 ◦ 4-way resolution up to 720p30 + content up to 4Kp5

6.8.16.2 Full individual audio and video transcoding

6.8.16.3 H.323/SIP/VoIP in the same conference

6.8.16.4 Support for presentation (H.239/BFCP) from any participant at resolutions up to 3840 x 2160p5

6.8.16.5 Best Impression (automatic continuous presence layouts)

6.8.16.6 Encryption and dual stream from any site

6.8.17 Protocols

6.8.17.1 H.323

6.8.17.2 SIP

6.8.17.3 Cisco Webex

6.8.18 Embedded encryption

6.8.18.1 H.323 and SIP point-to-point

6.8.18.2 Standards-based: H.235 v3 and Advanced Encryption Standard (AES)

6.8.18.3 Automatic key generation and exchange

6.8.19 IP network features

6.8.19.1 DNS lookup for service configuration

6.8.19.2 Differentiated services (Quality of Service [QoS])

6.8.19.3 IP-adaptive bandwidth management (including flow control)

6.8.19.4 Automatic gatekeeper discovery

6.8.19.5 Dynamic playout and lip-sync buffering

6.8.19.6 H.245 Dual-Tone Multi-Frequency (DTMF) tones in H.323

6.8.19.7 RFC 4733 DTMF tones in SIP

6.8.19.8 Date and time support using Network Time Protocol (NTP)

6.8.19.9 Uniform Resource Identifier (URI) dialing

6.8.19.10 Dynamic Host Configuration Protocol (DHCP)

6.8.19.11 802.1X network authentication

6.8.19.12 802.1Q Virtual LAN

6.8.19.13 802.1p [QoS and Class of Service (CoS)]

6.8.19.14 Cisco Media Assure and Clear Path, including packet loss-based down speeding

6.8.20 Call control

6.8.20.1 Cisco Unified Communications Manager (CUCM) ◦ Native registration

CUCM ◦ Requires CUCM Version 10.5.2 or later with device pack Room Kit Plus

6.8.20.2 Cisco Expressway ◦ Native registration with Expressway

6.8.20.3 Cisco WebEx

6.8.20.4 Third-party H.323 Gatekeepers and standards-based SIP proxies

6.8.21 IPv6 network support

6.8.21.1 Single call stack support for both H.323 and SIP

6.8.21.2 Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ

6.8.21.3 Support for both static and automatic IP configuration (stateless address auto configuration)

6.8.22 Security features

6.8.22.1 Management using HTTPS and SSH

6.8.22.2 IP administration password

6.8.22.3 Password to access administration features on Touch 10 controller

6.8.22.4 Disable IP services

6.8.22.5 Network settings protection Certificate management

6.8.22.6 Certificate Authority Proxy Function (CAPF) support for additional security

6.8.22.7 Manufacturer-Installed Certificates (MIC)

6.8.22.8 Locally Significant Certificates (LSC)

6.8.22.9 X.509 Digital Certificates (DER encoded binary); both DER and Base-64 formats are acceptable for the client and server certificates; certificates with a key size of 1024, 2048, and 4096 are supported Other interfaces

6.8.22.10 USB 2.0 port, uUSB, factory reset pinhole Network interfaces Codec Plus

6.8.22.11 1 Ethernet (RJ-45) 10/100/1000 for LAN

6.8.22.12 1 Ethernet (RJ-45) 10/100/1000 for direct pairing with camera (camera control)

6.8.22.13 1 Ethernet (RJ-45) 10/100/1000 with PoE, for direct pairing with

Touch 10

6.8.22.14 Wi-Fi 802.11a/b/g/n/ac 2.4 GHz and 5 GHz for LAN

6.8.22.15 2x2 multiple input and multiple output (MIMO) Power supplies (2)

6.8.22.16 100 to 240 VAC, 50/60 Hz, 12V DC input

6.8.22.17 Average 20 W, peak 70W

6.8.23 Dimensions:

6.8.23.1 Width: 14.1 in. (35.9 cm)

6.8.23.2 Height: 1.7 in. (4.3 cm)

6.8.23.3 Depth: 5.6 in. (14.3 cm)

6.8.23.4 Weight: 3.9 lb. (1.77 kg)

6.9 Quantity 3: (Crestron TS-1070-GV-B-S) 10.1 in. Tabletop Touch Screen, Government Version, Black Smooth

6.9.1 10.1 in. (257 mm) widescreen active-matrix color display and 1920 x 1200 WUXGA display resolution

6.9.2 Capacitive touch screen display

6.9.3 Custom-programmable virtual control buttons

6.9.4 Supports Crestron HTML5 and Smart Graphics® software custom user projects

6.9.5 H.265, H.264, or MJPEG streaming video display

6.9.6 Single wire Ethernet connection with PoE or PoE+ power

6.9.7 USB 2.0 port for room availability accessories

6.9.8 Enterprise grade security and authentication

6.9.9 Web, cloud, or device-based configuration

6.9.10 No microphone, Bluetooth® communications beacon, and Wi-Fi® network connectivity to comply with government applications demanding extra privacy and security.

6.10 Quantity 1: (Crestron C2N-H Block) Multi-type Cresnet Distribution Block

6.10.1 A parallel distribution block for termination of multiple Cresnet® cables.

6.10.2 Three different types of connectors are provided to accommodate all types of Cresnet wiring including standard 4-wire Cresnet cable, Cresnet “High-Power” cable, and RJ11 modular cables.

6.10.3 Diagnostic LEDs indicate presence of network power and data.

6.10.4 A mounting plate (included) provides for standalone surface mounting.

6.10.5 Eight 4-pin 3.5mm detachable terminal blocks Cresnet distribution ports

6.10.6 Five 4-pin 5mm detachable terminal blocks Cresnet distribution ports

6.10.7 Three 6-pin RJ11 female; RJ11-style Cresnet distribution ports

6.10.8 Enclosure: Metal with black finish, surface mount box with removable mounting plate, rack mount kit available separately

6.10.9 Dimensions: Height: 1.33 in (34 mm) Width: 6.55 in (167 mm) Depth: 4.30 in (110

mm) Weight 10.9 oz (309 g)

6.11 Quantity 2: (Crestron SSW-102-EL) Room Availability Hall Way Sign

6.11.1 Material: Acrylic, two sided

6.11.2 Engraving: “In-Use”

6.11.3 Illumination: Edgelit RGB LED

6.11.4 Functionality: Supports alternating red/green indication of room availability status when connected to a room scheduling touch screen via USB, supports custom RGB color mixing when connected to a control system.

6.11.5 USB 2.0 device for connection to a touch screen

6.11.6 Cresnet slave mode

6.11.7 CNET (1) 4-pin 3.5 mm detachable terminal block.

6.11.8 USB (1) Micro-USB Type B connector, female; USB 2.0 device port; 6ft (1.83 m) micro-B male to A male USB cable included

6.11.9 USB Power 1.2 Watts @ 5 Volts USB power

6.11.10 Cresnet Power Usage: 2 Watts @ 24 Volts DC

6.11.11 Operating Temperature 41° to 113° F (5° to 45° C)

6.11.12 Heat Dissipation: 4 BTU/hr on USB power; 7 BTU/hr on Cresnet power

6.11.13 Composition: Metal bracket with replaceable acrylic sign face and magnetically-held gray plastic bezel

6.11.14 Mounts to a 1-gang U.S. electrical box or plaster ring

6.11.15 Height: 6.41 in (163 mm)

6.11.16 Width: 2.79 in (71 mm)

6.11.17 Depth: 8.57 in (218 mm)

6.11.18 Projects 8.43 in (214 mm) from the mounting surface

6.11.19 Weight: 5.7 lb (2.6 kg)

6.12 Quantity 2: (Crestron AMP-2210T) 2x210W Commercial Power Amplifier, 4/8Ohms or 70/100V

6.12.1 Balanced or unbalanced analog line-level

6.12.2 Output Signal Types: 4/8 Ohm, 70 Volt, or 100 Volt

6.12.3 Output Power: 120 Watts at 8 Ohms; 210 Watts at 4 Ohms; 420 Watts at 8 Ohms bridged; 120 Watts at 70 or 100 Volts (Transformer isolated)

6.12.4 Frequency Response: 20Hz to 20kHz ±0.5 dB at 4/8 Ohms;

80Hz to 20kHz +0/-3 dB at 70/100 Volts

6.12.5 Gain: 23 dB with INPUT LEVEL control set at 12 o'clock nominal position

6.12.6 Input CH 1-2: (2) 3-pin 3.5mm detachable terminal blocks;

Balanced/unbalanced line-level audio inputs;

Input Level: 5.3 Vrms maximum with INPUT LEVEL control set at minimum position;

Input Impedance: 24k Ohms balanced, 12k Ohms unbalanced

6.12.7 Speaker Output: (2) 4-pin 7.62mm 15A detachable terminal blocks;

4Ω/8Ω and 70/100V power amplifier outputs;

Wire Size: Terminals accept up to 14 AWG

6.12.8 Remote: (1) 6-pin 3.5mm detachable terminal block;

Provides (2) remote control inputs; enables independent power control of each channel via local jumpers or remote contact closures;

inputs may be safely paralleled for global control

6.13 Quantity 2: (Crestron PRO4) AV system processor

6.13.1 4-Series control system with 2 GB SDRAM and 8 GB flash memory

6.13.2 Embedded 4-Series™ multicore CPU processor

6.13.3 XPanel computer and web-based control

6.13.4 Modular programming architecture

6.13.5 Front panel color LCD display for setup and diagnostics

6.13.6 Onboard IR/serial, COM, I/O, relay, Cresnet® network, and high-speed gigabit

Ethernet control ports

6.13.7 Control subnet ports with PoE+ providing a dedicated local network for Crestron® devices

6.13.8 High-speed USB 2.0 host port and rear panel memory card slot

6.13.9 Three built-in control card expansion slots (optional)

6.13.10 IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections

6.13.11 Crestron Fusion® software room monitoring and scheduling support

6.13.12 XiO Cloud® service provisioning and management support

6.13.13 Enterprise-class network security and authentication

6.13.14 SNMP V3 remote IT management support

6.13.15 Native BACnet network/IP support

6.13.16 Installer setup via front panel, software, web browser, or cloud

6.13.17 IPv6 ready

6.13.18 Rack mountable

6.14 Quantity 5: (Biamp Tesira Forte DAN VT) Digital Signal Processor

6.14.1 32 x 32 channels of digital audio networking via the Dante protocol

6.14.2 AES67-enabled Dante endpoin

6.14.3 12 mic/line level inputs with AEC, 8 mic/line level output

6.14.4 Gigabit Ethernet port

6.14.5 Up to 8 channels of configurable USB audio

6.14.6 RS-232 serial port

6.14.7 Rack mountable (1RU

6.14.8 Supports port authentication via IEEE 802.1X

6.14.9 SIP VoIP interface via a RJ-45 connector

6.14.10 Frequency Response: 20Hz to 20kHz, +4dBu output:

6.14.11 THD+N (22Hz to 22kHz): 0dB gain, +4dBu input:54dB gain, -50dBu input:

6.14.12 EIN: (no weighting, 22Hz to 22kHz):

6.14.13 Dynamic Range: (in presence of signal) 22Hz to 22kHz, 0dB

6.14.14 Input Impedance: (balanced):

6.14.15 Output Impedance: (balanced):

6.14.16 Input Gain Range: (6dB steps)

6.15 Quantity 4: (Audio-Technica ES925C6/FM3), Cardioid Microphone with RBG LED Status indicator and three pin flush mount power module.

6.15.1 Modular microphone system includes an interchangeable microphone element, gooseneck and power module.

6.15.2 Element housing features a highly visible, single-state RGB LED status indicator.

6.15.3 Power module plugs into any standard XLRF-type connector or mounts to 5/8"-27 stands using included quick-mount stand adapter.

6.15.4 Cardioid elements permit angle of acceptance of 120°.

6.15.5 Designed for professional sound reinforcement and other commercial sound applications.

6.15.6 Included low-profile universal isolation mount attenuates noise, shock and vibration.

6.15.7 Small-diameter gooseneck design permits highly flexible positioning.

6.15.8 Superior off-axis rejection for maximum gain before feedback.

6.15.9 UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI).

6.15.10 Element: Fixed-charge back plate, permanently polarized condenser

6.15.11 Frequency Response: 30 - 20,000Hz

6.15.12 Open Circuit Sensitivity: -40dB (10.0mV) re 1V @ 1 Pa

6.15.13 Impedance: 180Ω

6.15.14 Maximum Input Sound Level: 140dB SPL

6.15.15 Dynamic Range (Typical): 112dB

6.15.16 Signal-To-Noise Ratio: 66dB

6.15.17 Phantom Power Requirements: 11 - 52V DC

6.15.18 Switch: 2x LED Color: Mic On and Mic Off

6.15.19 Current Consumption: 8mA

6.15.20 Weight: 3.9oz (110g)

6.15.21 Dimensions (W x H x D): 1.50" x 1.89" x 8.17" (38.0mm x 48.0mm x 207.6mm)

6.15.22 Output Connector: Integral 3-pin XLRM-type

6.16 Quantity 1: (Clock Audio CDT100 MARK 3-UDP), Dante’ Audio Converter

6.16.1 Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol

6.16.2 Under table mounting

6.16.3 Audio and control signals transported over Dante

6.16.4 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single

CAT-5)

6.16.5 Provides Phantom Power for each mic input

6.16.6 4 control inputs compatible with all Clock audio devices

6.16.7 Open API for interfacing with CRESTRON Control Systems

6.16.8 Compatible with any Dante capable audio DSP used in combination with a Crestron or AMX Controller

6.17 Quantity 2: (Extron DXP 1616 HD 4K PLUS 60-1497-21) Digital and Analog Multi-Plane Modular Matrix Switcher

6.17.1 Supports computer and video resolutions up to 4K/60 @ 4:4:4

6.17.2 Supported HDMI 2.0 specification features include data rates up to 18 Gbps, HDR, Deep Color up to 12-bit, 3D, HD lossless audio formats, and CEC control

6.17.3 HDMI audio de-embedding with digital S/PDIF and analog stereo audio outputs

6.17.4 HDCP authentication and signal presence LED indicators — Front panel LED indicators for signal presence and HDCP authentication provide real time feedback and monitoring of key performance parameters.

6.17.5 Audio breakaway — Provides the capability to break an analog audio signal away from its corresponding video signal and route to audio output 2. The 4x2, 16x8, and 16x16 models allow routing of analog audio signals to any audio output.

6.17.6 RS-232 control port — Using serial commands, the matrix switcher can be integrated into a control system. Extron products use the SIS™ – Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programing.

6.17.7 JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.

6.18 Quantity 45: (Extron 26-713-01) DisplayPort M-HDMI F Active, 6"

6.18.1 Dongle DisplayPort Male connector to Female HDMI 6” adaptor dongle.

6.18.2 Provides connectivity between DisplayPort sources and HDMI displays and peripherals

6.18.3 Provides active conversion of DisplayPort signals to HDMI

6.18.4 Supports resolutions up to 4K/60 @ 4:4:4 with data rates up to 18 Gbps

6.18.5 Complies with VESA Interoperability Guidelines

6.18.6 HDCP compliant

6.18.7 Passes EDID information from HDMI display to the source

6.19 Quantity 30:, (Extron HDMI PRO P/50 26-663-06) 6’ HDMI Premium High Speed Optical Cables

– Plenum

6.19.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz 8-bit color depth, max. 18.0 Gbps data rate

6.19.2 Power Consumption: 225mW

6.19.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

6.19.4 Frame Rate: 24, 25, 30, 50, or 60 fps

6.19.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

6.19.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

6.20 Quantity 15: (Extron HDMI PRO P/75 26-726-35) 35’ HDMI Premium High Speed Optical Cables

6.20.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz

8-bit color depth, max. 18.0 Gbps data rate

6.20.2 Power Consumption: 225mW

6.20.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

6.20.4 Frame Rate: 24, 25, 30, 50, or 60 fps

6.20.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

6.20.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

6.21 Quantity 10: (Extron HDMI PRO P/75 26-726-50) 50’ HDMI Premium High Speed Optical Cables

6.21.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz

8-bit color depth, max. 18.0 Gbps data rate

6.21.2 Power Consumption: 225mW

6.21.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

6.21.4 Frame Rate: 24, 25, 30, 50, or 60 fps

6.21.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

6.21.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

6.22 Quantity 10: (Extron HDMI PRO P/75 26-726-75) 75’ HDMI Premium High Speed Optical Cables

6.22.1 HDMI: Up to 4K (4096x2160) @ 60 Hz, UHD (3840x2160) @ 60 Hz

8-bit color depth, max. 18.0 Gbps data rate

6.22.2 Power Consumption: 225mW

6.22.3 Connector Type: 1 male type A HDMI to 1 male type A HDMI

6.22.4 Frame Rate: 24, 25, 30, 50, or 60 fps

6.22.5 Chroma Sampling: 4:4:4, 4:2:2, or 4:2:0

6.22.6 Signal Type: HDMI 2.0b, HDCP 2.3, HDR

6.23 Quantity 30: (Tripp Lite B202-150) USB Extender over CAT 5/6

6.23.1 Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

6.23.2 Locate a USB 1.1 peripheral up to 150-ft. (45.72 m) from your computer

6.23.3 Bus Powered - no additional AC adapters required

6.23.4 Uses readily available Cat5/Cat5e/Cat6 cable

6.23.5 Transfer rates of 1.5Mbps to 12Mbps

6.24 Quantity 2: (Vaddio AV Bridge Conference) AV Streaming Interface

6.24.1 Encoding:

6.24.1.1 IP (H.264 & AAC Audio) Resolutions up to 1080p/30, USB 2.0 (MJPEG

& PCM Audio) Resolutions up to 720p/30

6.24.2 Media Players:

6.24.2.1 Quick-Time, RealPlayer and VLC Media Player (for IP Streaming)

6.24.3 Resolutions:

6.24.3.1 HDMI & YPbPr: 1080p/60/59.94/50/30/25 frames/s, 720p/60/59.94/50 frames/s, 1080i/59.94/50 fields/sec

6.24.3.2 RGBHV (VESA): 1280 x 720@60Hz (16:9), 1280x768@60Hz (15:9)m, 1280x800@60Hz (16:10), 1360 x 768@60Hz (16:9), 1024 x 768@60Hz (4:3 centered in 16:9 frame)

6.24.3.3 DVI (on HDMI connector using sRGB color space):

1080p/60/59.94/50/frames/s, 720p/60/59.94/50Hz frames/s 1080i/59.94/50Hz, fields/sec, 1440x900@60Hz, 1360x768@60Hz, 1280x800@60 Hz, 1280x768@60Hz, 1280x 720@60Hz

6.24.3.4 EDID Supported Resolutions: 1080p/60/59.94/50/frames/s, 720p/60/59.94/50Hz frames/s, 1440x900@60Hz, 360x768@ 60Hz, 1280x800@60 Hz

6.24.3.5 Composite Video (Standard Definition): 480i/29.97Hz NTSC, 576i/25Hz

PAL

6.24.4 Video/Audio DSP Video:

6.24.4.1 Auto-scaling, Noise Filter and De-interlacing, Audio: Compressor, Equalizer and Filters

6.24.5 Audio I/O:

6.24.5.1 Two (2) XLR-F, 50 ohm stereo, balanced inputs +4dBu, Two (2) RCA-F 10k ohm stereo, unbalanced inputs -10dBV

6.24.6 USB 2.0:

6.24.6.1 USB: Type-B USB 2.0 Compliant Connector with UVC and UAC

Standard Drivers

6.24.7 Network

6.24.7.1 RJ-45 Ethernet 10/100 Base-T, Supports RTSP and HLS (Apple’s HTTP Live Streaming)

6.24.8 RS-232

6.24.8.1 RJ-45 Control Port, 38,400 Baud Rate, Vaddio ASCII Command

Protocol

6.24.9 Control

6.24.9.1 Embedded Web Server for configurations and administration, Front Panel controls for switching A/V, muting and volume, Telnet on the Network RJ-45 Port and RS-232 on a RJ-45 port with 38,400 Baud Rate using Vaddio ASCII Control Protocol

6.25 Quantity 15: (Middle Atlantic SS Shelf) 1RU Sliding Rack shelf

6.25.1 High 50 lb. capacity, with rugged ball bearing slides

6.25.2 Note: occupies slightly more than one Rackspace

6.25.3 Adjustable rear support to mount in most racks (15.1” to 23.9” range)

6.25.4 Steel construction with black powder coat finish

6.25.5 Extends a full 13”

6.26 Quantity 1: (Middle Atlantic C5-FF27-3) 3 Bay Credenza

6.26.1 Plexi inset doors

6.26.2 EIA Compliant 19” A/V Credenza Rack.

6.26.3 Credenza Rack shall be available in 3 bay configuration. Overall dimensions shall be

31-1/4” H x 65-3/4”W x 24.27” D

6.26.4 Usable height shall be 14 rack spaces per bay. Rack frames shall ship fully assembled and be constructed of steel.

6.26.5 Total weight capacity with Middle Atlantic colored finishing kit shall be 600 lbs., with a maximum of 350 lbs. to be placed on the top surface.

6.26.6 Each rack bay shall come equipped with 2 pairs of 11-gauge steel rack rail tapped with 10-32 mounting holes in universal EIA spacing, black e-coat finish and numbered rack spaces.

6.26.7 Credenza rack shall have one 8 CFM thermostatically controlled proportional speed blower per bay, # COMP-COOL-3. Exhaust air shall exit the front of the credenza for unrestricted air flow. Thermostatically controlled fans shall be powered on at 87°F and turn off at 85°F.

6.26.8 Credenza rack shall require vent panel, model # C5-VENT3-BK and have venting on the top and bottom of the face of the rack.

6.26.9 Credenza rack shall include two adjustable side mounted horizontal lacing bars for enhanced cable management.

6.26.10 Credenza rack shall have a steel rear access panel.

6.26.11 Credenza rack shall be finished in a durable black powder coat.

6.26.12 Top, sides, and front doors shall ship separately from rack frame and be model #

C5K3A1KPV01. Top shall be constructed of 1-1/8” OR 1” thick triple refined MDF or Particle Board, sides shall be constructed of ¾” OR 1” thick triple refined MDF or particle board, front doors shall be constructed of 3/4” thick triple refined MDF. Top, sides and front doors shall be in a Klasik style. Front doors shall be plexi. Top, sides and front doors shall be available in Veneer, Scarlett Cherry color. Each door will include #ACC-LOCK1-CBV Lock kit

6.26.13 Credenza rack shall include 4 fine floor casters.

6.26.14 Credenza rack shall be GREENGUARD Gold Certified with the exception of

Veneer fishes, which shall be GREENGUARD Certified.

6.26.15 Credenza rack shall comply with the requirements of RoHS EU Directive

2002/95/EC. Credenza rack shall be manufactured by an ISO 9001 and ISO 14001registered company.

Credenza Rack frame shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the rack, fans shall be warrantied for a period of three years and wood panels shall be warrantied for a period of 7 years.

6.27 Quantity 6: (Middle Atlantic PDC-915R-2) 115-volt Rack mount Power Distribution Unit

6.27.1 Compliance: EIA/TIA 310D.

6.27.2 UL Listed: US and Canada.

6.27.3 Capacity: 15 Amps.

6.27.4 Material: 18-gauge steel.

6.27.5 Finish: Flat black powder coat.

6.27.6 Size: 1 rack space.

6.27.7 Contact Closure: Remote surge suppression status notification to compatible monitoring device.

6.27.8 Nominal Power: 115 V AC, 60 Hz.

6.27.9 Power Cord: 15 amp, 14/3, 9 feet long, with NEMA 5-15P plug.

6.27.10 Power Outlets:

6.27.10.1 Type: Vertically oriented, NEMA 5-15R.

6.27.10.2 Spacing: For plug-in power supplies.

6.27.10.3 Front: 1.

6.27.10.4 Rear: 8.

6.27.11 Circuit Breaker:

6.27.11.1 Capacity: 15 Amps.

6.27.11.2 Location: Front.

6.27.12 Two-Stage, Normal-Mode, Spike and Surge Suppression and EMI Filtering

6.27.13 Nominal Line Voltage: 120 VAC.

6.27.14 Maximum Line Current: 15 Amps.

6.27.15 Maximum Allowable Voltage: 125 VAC (RMS).

6.27.16 Protection Mode: Line to neutral.

6.27.17 Peak Impulse Current (8/20 microseconds):

6.27.18 One Time: 30,000 Amps.

6.27.19 Two Times within 5 Minutes: 19,500 Amps.

6.27.20 Ten Times within 2 Minutes: 7,000 Amps.

6.27.21 Maximum Clamping Voltage: 545 V at 100 Amps.

6.27.22 Response Time: Instantaneous (less than 1 nanosecond).

6.27.23 EMI/RF Suppression: More than 20 dB.

6.27.24 Surge Energy Dissipation: 711 Joules (10/100 microseconds).

6.27.25 Surge Suppression Circuit: Does not pass noise contamination to ground.

6.28 Quantity 2: (Middle Atlantic C5KH-VAR) 27”, 3 Bay HPL Sota Style in Black

6.28.1 C5 Credenza - 3 Bay HPL Sota Style in Black with Solid Doorblack locks, modern aluminum handles. ACC-HANDLE1-MAH ACCY HNDL,1 BAY,MOD ALUM (included) ACC-LOCK1-BKH ACCY LOCK,1 BAY,BLACK (included)

7. PLACE OF DELIVERY

USFFC HQ Shipping and Receiving, BLDG NH-35 757-836-1777 c/o Tony Wallace N61, Suite 250 1428 Blandy Road Norfolk VA 23551

8. TECHNICAL POINT OF CONTACT

Mr. Tony Wallace, antonio.c.wallace3.civ@us.navy.mil (757)836-2733