Attachment I - Performance Work Statement.pdf

0902 - 1

MACHINERY, AUXILIARY

T-AO 187 CLASS

CATEGORY "A"

SOR: TWO HUNDRED (200) PROPELLER BLADE BOLTS REFLASHING

1.0 ABSTRACT:

1.1 This item describes the requirements for an OEM Facility to perform Propeller Blade Bolt Assembly Overhaul; inspect, perform cleaning prior to re-flashing, and re-flash previously used propeller bolts.

2.0 REFERENCES/ENCLOSURES:

2.1 References:

2.1.1 NAVSEA Tech Man T9245-AE-MMC-010, “Controllable Reversible Pitch Propeller”

2.2 Enclosures:

2.2.1 None

3.0 ITEM LOCATION/DESCRIPTION:

3.1 Locations:

3.1.1 Crated in N32205 MSC W-143 Warehouse, 1968 Gilbert Street DWY 10, Norfolk, VA 23511

3.2 Quantity:

3.2.1 Two Hundred (200) Propeller Bolts

3.3 Description:

3.3.1 Bolt, Machine

3.3.2 NSN: 5306013511166

3.3.3 Part No. 115735005

3.3.4 Manufacturer: Rolls-Royce Naval Marine Inc

3.3.4.1 Installed on: Propellers: four (4) blades, 21’0” diameter, NI-AL-Brz, ABS TY4, controllable reversible pitch

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES:

4.1 Government Furnished Equipment: None

4.2 Government Furnished Material:

4.2.1 Bolt, Machine, QTY Two Hundred (200) EA, Rolls-Royce Marine

4.3 Government Furnished Services: None

5.0 NOTES:

5.1 Re-flashing certification paperwork to be issued by OEM Facility at completion of repairs (as required by ABS/USCG for bolts to be later installed into T-AO 187 Class Fleet Vessels)

5.2 POP 24 JUL 23 – 30 SEP 23

5.3 POC: Moira Kelly, N751 Port Engineer

5.3.1 Moira.S.Kelly2.civ@us.navy.mil

5.3.2 O: 757.341.5483, C: 757.927.6892

0902 - 2

6.0 QUALITY ASSURANCE REQUIREMENTS:

6.1 None additional.

7.0 STATEMENT OF WORK REQUIRED:

7.1 Accept government materials of two hundred (200) propeller blade bolts, currently located at W-143.

MSC to provide shipment from MSC Warehouse to Contractor facility and return shipping to MSC Warehouse W-143 after completion of repairs.

7.2 All work on this item shall be accomplished under the direct supervision of an authorized manufacturer’s field service engineer on units indicated in paragraph 3.0.

7.3 Complete required work to restore all two hundred (200) propeller blade bolts to “A” Condition Code (OEM Manufacturer Refurnished to “like new” condition).

7.3.1 Visually inspect and accomplish NDT on all blade bolts (previously NDT performed by shipyard and previous Rolls Royce Field Services Technical Representative’s report requires re-flashing).

7.3.2 Clean all residual NDT materials (i.e. dyes, magnetic particles, etc.) from bolts prior to re-flashing.

7.3.3 Perform re-flashing of the propeller blade bolts.

7.3.4 Issue re-flashing OEM Facility paperwork replace bolts back into original shipping crates, bolts are to be properly protected to prevent damage), for shipment back to MSC W-143 Warehouse.

Paperwork to be included within the crate for the bolts, as well as duplicate copy emailed to N751 Port Engineer, Moira Kelly, moira.s.kelly2.civ@us.navy.mil

7.4 Contractor to scrap crates that bolts are delivered in.

7.4.1 Contractor to procure and provide seven (7) standard forty (40) bolt crates for re-flashed bolts.

7.4.2 Each of the new crates shall have (32) bolts, with the remaining lesser quantity in the last crate.

7.4.3 Each crate shall be marked with quantity of bolts within each crate.

7.4.4 Crates shall conform to ISPM-15 International Shipping requirements.

7.5 After completion of all propeller blade bolt re-flashing, contact ACO & PPE Kelly so they are able to coordinate with MSC N4 personnel for shipment back to MSC Warehouse W-143.

7.6 Manufacturer’s Representative:

7.6.1 The contractor shall provide the services of an authorized/qualified manufacturer’s (Rolls Royce) field service engineer for the duration of this service order to oversee repairs.

8.0 GENERAL REQUIREMENTS:

8.1 None additional.