Attachment B - Specifications - Pages 1-10.docx

RFx 3000024496 Attachment B – Specifications Warehouse & Kitchen Freezers – DOC Group 1 Line 1 Warehouse Cooler Evaporator Brand/Model – Climate Control CEL0155BS6EEAB0403 or Equal

· Hinged, removable front access panels on each side providing access to electrical and refrigeration components

· Molded fan guard, NSF and UL sanitation rated

· Liquid line solenoid wire harness factory installed

· Sweat connections on refrigeration components

· Copper tubing aluminum fin evaporator coils

· Electric element defrost coils and drain pan

· ¾” diameter drain hole in drain pan

· Mounted TXV { 404A}/std. solenoid

· DTFD fixed {defrost termination fan delay}

· Heater high limit switch included

· Heavy gauge aluminum cabinet {stucco}

· Power 208-230-60-1

· BTU capacity- Minimum 14,000 BTU 10° TD/-20°

Line 2 Warehouse Freezer Condensing Unit Brand/Model – Climate Control CCH0045LCBCZA0300 or Equal

· Cabinet and construction

· Microchannel technology condenser coils

· Copper tubing with aluminum fins

· Painted steel cabinets and corrosion protection

· Heavy duty steel base

· Air cooled

· Serviceability

· Service valves located outside of cabinet-

· Receiver with fusible plug, liquid shut off valve and charging port

· Electrical panel for access

· Prefabricated wiring harness connections and consistent labeling

· Unit stays on when hood is removed for servicing

· Sight glass and liquid line filter drier standard and easily visible

· Quality

· Leak tested, bump tested.

· Low and high pressure controls tested

· Electrical circuitry tested, piping and or vibration eliminators secured

· Auto-reset high pressure

· Adjustable low pressure control

· Additional Features

· Electric defrost timer

· Crankcase heater

· Low ambient control

· Power – 208-230/60/3

· R404A refrigerant compatible

· Warranty: Minimum 4 years

· BTU capacity – Minimum 15,470 BTU -20° @95°F Ambient

Line 3 Warehouse Cooler Evaporator Brand/Model – Climate Control CEL0190AS6AMAB0403 or Equal

· Specs – hinged, removable front access panels on each side providing access to electrical and refrigeration components.

· Molded fan guard, NSF and UL sanitation rated

· Liquid line solenoid wire harness factory installed

· Sweat connections on refrigeration components

· Copper tubing aluminum fin evaporator coils

· Electric element defrost coils and drain pan

· ¾” diameter drain hole in drain pan

· Mounted TXV { 404A}/std. solenoid

· DTFD fixed {defrost termination fan delay}

· Heater high limit switch included

· Heavy gauge aluminum cabinet {stucco}

· Power 115/60-1

· BTU capacity- 18,000 BTU 10° TD/ 20° f SST

Line 4 Warehouse Freezer Condensing Unit Brand/Model – Climate Control CCH0020MCACZA000 or Equal

· Cabinet and construction – microchannel technology standard on air cooled condenser coils, copper tubing with aluminum fins, painted steel cabinets and corrosion protection, heavy duty steel base

· Serviceability - service valves located outside of cabinet-

· Receiver with fusible plug, liquid shut off valve and charging port

· Electrical panel for access

· Prefabricated wiring harness connections and consistent labeling

· Unit stays on when hood is removed for servicing

· Sight glass and liquid line filter drier standard and easily visible

· Quality - Leak tested, bump tested. Low and high pressure controls tested

· Electrical circuitry tested, piping and or vibration eliminators secured

· Auto-reset high pressure

· Adjustable low pressure control

· Additional Features

· Crankcase heater

· Electric defrost timer

· Low ambient control

· Power – 208-230/60/3

· R404A refrigerant compatible

· Extended warranty of 4 years/ option

· BTU Capacity – Minimum 20,700 BTU @ +25° @95°F Ambient

Line 5 4 Compartment Warehouse Freezer with Floor Brand/Model: Amerikooler or Equal Custom build

· Exterior dimension:

· Width: 19’

· Length: 46’ 6”

· Height: 8’-7” *with floor/rectangular *Exterior Dimensions must be as listed due to existing space limitations*

· Interior dimension:

· Width: 19’

· Length: 11’ 1½”±4”

· Height: 7’-11”

· Temperature: -20 degrees

· Insulation: 4” thick AK-XPS4 or Equal extruded foam with R-values of R-32 with 50 year thermal warranty.

· UL classified core flame spread 15, smoke rating less than 165

· Hydrophic / Moisture Resistant

· Warranty: 15 year panel warranty and 1 year parts warranty {minimum}

· Finishes: interior & exterior wall/interior & exterior ceilings: 26 gauge stucco embossed acrylume

· Floor:

· Application: foot traffic-no rolling carts

· NSF floor panel rated for 1700lbs. /sq. ft. , stainless steel integrated

· Door: 36” x 78” left handed flush door with brushed hardware.

· Heavy duty deadbolt handle latch with ¼ turn release.

· Regulating thermostat heater wire and heated vent.

· Digital LED thermometer with pilot light switch.

· Vapor proof 120 volt LED light fixture

· Interior & exterior finish: 26 gauge stucco embossed acrylume

· Accessories:

· Rain proof membrane with 10 ft. long termination bars/1 screw every 12 inches (membrane should be 1 ft. larger in both directions minimum)

· Drain hood for door 22 gauge stainless steel, with tek screws.

· Perimeter reinforcement floor angle (.050 thick aluminum) 1 ½” x 6” x 48” each section – supplied with stainless steel tek screws, to secure wall and floor concrete anchors (concrete anchors provided by DOC.)

· NSF/ DOE & ASTM compliant

-Item shall be delivered as a kit to be assembled by DOC personnel. Vendor will need to notify facility in advance of delivery and go through security at front gate. Facility has unloading means.-

Group 2 Line 6 Kitchen Freezer with Floor Brand/Model: Amerikooler or Equal Custom build

· Interior dimension:

· Width: 9’-1 ¾” ±4”

· Length: 16’-11 ½” ±4”

· Height: 7’-6 ¼” ±4”

· Temperature: -20 degrees

· Insulation: 4” thick AK-XPS4 or Equal extruded foam with R-values of R-32 with 50 year thermal warranty.

· UL classified core flame spread 15, smoke rating less than 165

· Hydrophic / Moisture Resistant

· Warranty: 15 year panel warranty and 1 year parts warranty {minimum}

· Finishes: interior & exterior wall/interior & exterior ceilings: 26 gauge stucco embossed acrylume

· Floor:

· Application: foot traffic-no rolling carts

· NSF floor panel rated for 700lbs. /sq. ft. , stainless steel integrated

· Door: 36” x 78” left handed flush door with brushed hardware.

· Heavy duty deadbolt handle latch with ¼ turn release.

· Regulating thermostat heater wire and heated vent.

· Digital LED thermometer with pilot light switch.

· Vapor proof 120 volt LED light fixture

· Interior & exterior finish: 26 gauge stucco embossed acrylume

· Accessories:

· Rain proof membrane with 10 ft. long termination bars/1 screw every 12 inches (membrane should be 1 ft. larger in both directions minimum)

· Drain hood for door 22 gauge stainless steel, with tek screws.

· Perimeter reinforcement floor angle (.050 thick aluminum) 1 ½” x 6” x 48” each section – supplied with stainless steel tek screws, to secure wall and floor concrete anchors (concrete anchors provided by DOC.)

· NSF/ DOE & ASTM compliant

Line 7 Kitchen Cooler Evaporator

Brand/Model – Climate Control CEL0130BS6EEAB0403 or Equal

· Molded fan guard, NSF and UL sanitation rated

· Hinged, removable front access panels on each side providing access to electrical and refrigeration components

· Liquid line solenoid wire harness factory installed

· Sweat connections on refrigeration components

· Copper tubing with aluminum fin evaporator coils

· Electric element defrost coils and drain pan

· ¾” diameter drain hole in drain pan

· Mounted TXV { 404A}/std. solenoid

· DTFD fixed {defrost termination fan delay}

· Heater high limit switch included

· Heavy gauge aluminum cabinet {stucco}

· Power: 115-60-1

· BTU Capacity: Minimum 12,000 BTU 10˚ TD / -20˚

Line 8 Kitchen Freezer Condensing Unit Brand/Model – Climate Control 12 x 20 CCH0055LCBCZA0300 or Equal

· Cabinet and construction

· Microchannel technology on condenser coils

· Copper tubing with aluminum fins

· Painted steel cabinets and corrosion protection

· Heavy duty steel base

· Air cooled

· Serviceability

· Service valves located outside of cabinet

· Receiver with fusible plug, liquid shut off valve and charging port

· Large electrical panel for easier access

· Prefabricated wiring harness connections and consistent labeling

· Unit stays on when hood is removed for servicing

· Sight glass and liquid line filter drier standard and easily visible

· Quality

· Leak tested, bump tested

· Low and high pressure controls tested

· Electrical circuitry tested, piping and/or vibration eliminators secured

· Auto-reset high pressure

· Adjustable low pressure control

· Additional Features

· Electric defrost timer

· Crankcase heater

· Low ambient control

· Power – 208-230/60/3

· BTU Capacity: Minimum 15,470 BTU -20˚ @ 95˚F ambient

· R404A refrigerant compatible

· Warranty: Minimum 4 years -Item shall be delivered as a kit to be assembled by DOC personnel. Vendor will need to notify facility in advance of delivery and go through security at front gate. Facility has unloading means.-image1.jpg image2.jpg