Attachment 4 - Measurement and Payment.docx

MEASUREMENT AND PAYMENT FOR BID SCHEDULE LINE ITEMS

Completed items of work shall be measured and paid for in accordance to the items listed below. All work shall be done in accordance with the Specifications and Drawings. Payment shall be provided based on the actual quantities completed and shall represent full compensation under the contract. The price paid for the completed item of work shall include full compensation for furnishing all labor, materials, tools, equipment, site restoration and performing all work required by the provisions of the contract to furnish and install the item of work, complete in place. In all cases, the finished product shall be a complete, operational system or component. The price for the completed item of work shall include all applicable State, Federal, County, Tribal and local sales or other taxes, permits, and fees.

MOBILIZATION AND DEMOBILIZATION

Payment for transportation of equipment, material, and personnel to and from the job site location (regardless of trips required), required permits and fees, taxes, and all other necessary items to complete the work.

SOLID SEWER PIPE

Payment for solid sewer pipe, as specified in the Design and Specification, shall be made at the contract unit price for the sizes of pipe listed based on the number of linear feet installed. Payment shall include excavation, backfill and compaction; all pipe and fittings; connection of the solid sewer pipe to existing sewer service line or home; testing; and all other necessary items for a complete and operational installation.

UNDERGROUND CLEANOUT, DOUBLESWEEP

Payment for the underground cleanout, as specified in the Design and Specification, shall be made at the contract unit price based on the number of underground cleanouts installed. Payment shall include excavation, backfill and compaction, all pipe and fittings, and all other necessary items for a complete and operational installation. No payment shall be made for cleanouts installed above grade as part of the connection to existing house, or as part of drop manholes.

SEPTIC TANK, 1,000 GALLONS, 2 COMPARTMENT

Payment for trash tank, as specified in the Design and Specification, shall be made at the contract lump sum price based on a complete system. Payment shall include excavation, backfill, compaction, sand or gravel where un-uniform native soil or groundwater is present, concrete tank, risers, lids, effluent filter, plumbing, fittings, and all other necessary items for a complete and operational installation.

PUMP TANK, 1,000 GALLONS, 1 COMPARTMENT

Payment for the pump tank, as specified in the Design and Specification, shall be made at the contract lump sum price based on a complete system. Payment shall include excavation, backfill, compaction, sand or gravel where un-uniform native soil or groundwater is present, single compartment concrete tank, riser, lid, waterproofing, plumbing, ball valve, check valve, fittings, screened pump vault, pump, floats, conduit, electrical disconnect (when required), water tight junction box, subpanel, alarm, control panel, connection to the existing home electric panel, testing, and all other necessary items for a complete and operational installation.

TRANSPORT LINE, 2-INCH PVC

Payment for connections from the pump tank to the drainfield headworks, as specified in the Design and Specification, shall be made at the contract unit price for the size of pipe listed based on the number of linear feet installed. Payment shall include excavation, backfill, pipe and fittings, connections and other necessary items for a complete and operational installation.

LOW PRESSURE SHALLOW GRAVELLESS DRAINFIELD

Payment for drainfield, as specified in the Design and Specification, shall be made at the contract unit price for the number of linear feet installed. Payment shall include excavation, drainfield chambers, manifold, lateral pipe with orifices, cleanouts, observation ports, fittings, flushing, pressure testing, backfill, finished grading, grass seed, mulch, and all other necessary items needed for a complete and operational installation.

WATER METER ASSEMBLY WITH PRESSURE REDUCING VALVE

Payment for water meter assemblies as specified in the Design and Specification shall be made at the contract unit price based on the number of water meter assemblies installed. Compensation shall include payment for excavation, backfilling and compaction, saddle, corporation stop, water meter, coppersetter, angle stop, pressure reducing valve and fittings, meter box, and all other necessary items for a complete and operational installation.

HDPE WATER SERVICE LINE

Payment for water service line as specified in the Design and Specification shall be made at the contract unit price for the size of line listed based on the number of linear feet installed. Compensation shall include payment for excavation, backfilling and compaction; all fittings, including locating and connecting to existing service lines, casing; disinfection and testing; and all other necessary items for a complete and operational installation.