Attachment 4 -Brand Name or Equal Fiber Optic Insp Kit.pdf

DEPARTMENT OF THE AIR FORCE

97TH AIR MOBILITY WING (AETC)

ALTUS AIR FORCE BASE OKLAHOMA

24 April 2023

MEMORANDUM FOR 97 MXG/MXOPB

FROM: 97 AMXS/MXAC

SUBJECT: Brand Name, or Equal Smart Class Fiber Optic Inspection Kit

1. The new equipment purchased is an Viavi Smart class Handheld Fiberoptic Inspection Kit with Fiber optic accessory tip. The tester must come equipped with the following features:

• Must include OLP-82 power meter that can measure wavelengths between 780 to 1650 nm with 850, 980, 1300, 1310, 1490, 1550, and 1625 nm calibrated levels and can measure power from a range of -65 to +23 dBm with only ± 0.06dB uncertainty.

• Integrated PCM which is capable of both a low and high magnification FOV mode.

• Must be rugged, weather-proof design and utilizes normal alkaline or rechargeable batteries.

2. In addition to the above, the Government will require the following accessories and add-ons:

• Includes Necessary tips that will adapt to various fiber optics connectors on the KC-46 Aircraft.

• Cleaning materials for 2.5 and 1.25 mm (bulkhead and patch cord)

• Option to purchase care plan if needed.

3. Training: The contractor shall provide operation and maintenance training virtually at Altus AFB, OK after procurement of equipment (estimated at approximately 2 training session virtually).

4. Warranty: Upon final acceptance of the machine, a Standard Commercial Warranty shall commence for the duration of one year, to include as a minimum, parts and labor for the duration of the warranty, at no additional cost to the Government. Final acceptance is defined as the act of an authorized representative of the Government, by which the Government assumes ownership of existing supplies/equipment and/or approves specific services rendered, as partial or complete performance of the contract (i.e. testing, training, and delivery of all required technical documentation). This requirement does not waive any warranty requirement of FAR 52.212-4.