Attachment 3 US DOL Wage Determination.pdf
PDF 122 KB Posted
- Attached to
- Conserve Two Paintings and Frames Federal contract opportunity
- Solicitation number
- 140P4320Q0066
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 1 Statement of Work SOW.pdf | ||
| Sol_140P4320Q0066.pdf | ||
| Attachment 2 Photographs.pdf | ||
| Attachment 5 Photographs Frame Details Pawtucket Falls.pdf | ||
| Attachment 4 Photographs Frame Details Mile of Mills .pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 3 beta.SAM.gov https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 1/12
"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR
THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary of Labor | WAGE AND HOUR DIVISION
| WASHINGTON D.C. 20210
| Wage Determination No.: 2015-4036
Daniel W. Simms Division of | Revision No.: 15 Director Wage Determinations| Date Of Last Revision: 04/09/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
State: Massachusetts
This wage determination is applicable to the following cities and towns in MIDDLESEX COUNTY: Ashby Ayer Billerica Chelmsford Dracut Groton Littleton Lowell Shirley Tewksbury Townsend Tyngsborough Westford Harvard
**Fringe Benefits Required Follow the Occupational Listing**
OCCUPATION CODE - TITLE FOOTNOTE RATE
01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 19.06 01012 - Accounting Clerk II 21.40 01013 - Accounting Clerk III 23.95 01020 - Administrative Assistant 30.54 01035 - Court Reporter 22.95 01041 - Customer Service Representative I 16.46 01042 - Customer Service Representative II 18.50 01043 - Customer Service Representative III 20.19 01051 - Data Entry Operator I 17.37 01052 - Data Entry Operator II 18.95 01060 - Dispatcher Motor Vehicle 21.00 01070 - Document Preparation Clerk 18.51 01090 - Duplicating Machine Operator 18.51 01111 - General Clerk I 15.19 01112 - General Clerk II 16.58 01113 - General Clerk III 18.61 01120 - Housing Referral Assistant 23.44 01141 - Messenger Courier 15.71 01191 - Order Clerk I 19.21 01192 - Order Clerk II 20.96 01261 - Personnel Assistant (Employment) I 18.34 01262 - Personnel Assistant (Employment) II 20.51 01263 - Personnel Assistant (Employment) III 22.87
4/29/2020 beta.SAM.gov https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 2/12
01270 - Production Control Clerk 27.47 01290 - Rental Clerk 17.41 01300 - Scheduler Maintenance 18.80 01311 - Secretary I 18.80 01312 - Secretary II 21.03 01313 - Secretary III 23.44 01320 - Service Order Dispatcher 18.77 01410 - Supply Technician 30.54 01420 - Survey Worker 20.34 01460 - Switchboard Operator/Receptionist 15.68 01531 - Travel Clerk I 16.69 01532 - Travel Clerk II 18.05 01533 - Travel Clerk III 19.46 01611 - Word Processor I 18.85 01612 - Word Processor II 21.16 01613 - Word Processor III 23.68 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 25.21 05010 - Automotive Electrician 22.66 05040 - Automotive Glass Installer 21.67 05070 - Automotive Worker 21.67 05110 - Mobile Equipment Servicer 19.63 05130 - Motor Equipment Metal Mechanic 23.65 05160 - Motor Equipment Metal Worker 21.67 05190 - Motor Vehicle Mechanic 23.65 05220 - Motor Vehicle Mechanic Helper 18.30 05250 - Motor Vehicle Upholstery Worker 20.60 05280 - Motor Vehicle Wrecker 21.67 05310 - Painter Automotive 22.66 05340 - Radiator Repair Specialist 21.67 05370 - Tire Repairer 17.20 05400 - Transmission Repair Specialist 23.65 07000 - Food Preparation And Service Occupations 07010 - Baker 15.80 07041 - Cook I 18.23 07042 - Cook II 20.12 07070 - Dishwasher 13.72 07130 - Food Service Worker 14.28 07210 - Meat Cutter 22.00 07260 - Waiter/Waitress 13.81 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.05 09040 - Furniture Handler 13.71 09080 - Furniture Refinisher 19.56 09090 - Furniture Refinisher Helper 15.93 09110 - Furniture Repairer Minor 17.83 09130 - Upholsterer 20.96 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 13.92 11060 - Elevator Operator 15.36 11090 - Gardener 22.54 11122 - Housekeeping Aide 16.66 11150 - Janitor 16.66 11210 - Laborer Grounds Maintenance 18.25 11240 - Maid or Houseman 14.63 11260 - Pruner 16.78 11270 - Tractor Operator 21.20 11330 - Trail Maintenance Worker 18.25 11360 - Window Cleaner 18.12 12000 - Health Occupations 12010 - Ambulance Driver 24.70 12011 - Breath Alcohol Technician 25.57 12012 - Certified Occupational Therapist Assistant 30.96 12015 - Certified Physical Therapist Assistant 32.37 12020 - Dental Assistant 23.99 https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 3/12
12025 - Dental Hygienist 46.37 12030 - EKG Technician 38.43 12035 - Electroneurodiagnostic Technologist 38.43 12040 - Emergency Medical Technician 24.70 12071 - Licensed Practical Nurse I 22.85 12072 - Licensed Practical Nurse II 25.57 12073 - Licensed Practical Nurse III 28.51 12100 - Medical Assistant 20.00 12130 - Medical Laboratory Technician 25.84 12160 - Medical Record Clerk 20.10 12190 - Medical Record Technician 31.90 12195 - Medical Transcriptionist 21.13 12210 - Nuclear Medicine Technologist 46.81 12221 - Nursing Assistant I 12.09 12222 - Nursing Assistant II 13.59 12223 - Nursing Assistant III 14.83 12224 - Nursing Assistant IV 16.70 12235 - Optical Dispenser 27.53 12236 - Optical Technician 20.49 12250 - Pharmacy Technician 20.80 12280 - Phlebotomist 18.98 12305 - Radiologic Technologist 36.56 12311 - Registered Nurse I 31.18 12312 - Registered Nurse II 40.19 12313 - Registered Nurse II Specialist 40.19 12314 - Registered Nurse III 48.63 12315 - Registered Nurse III Anesthetist 48.63 12316 - Registered Nurse IV 58.29 12317 - Scheduler (Drug and Alcohol Testing) 31.68 12320 - Substance Abuse Treatment Counselor 22.28 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 22.17 13012 - Exhibits Specialist II 27.46 13013 - Exhibits Specialist III 33.59 13041 - Illustrator I 24.09 13042 - Illustrator II 29.83 13043 - Illustrator III 36.50 13047 - Librarian 34.75 13050 - Library Aide/Clerk 15.72 13054 - Library Information Technology Systems 28.03 Administrator 13058 - Library Technician 23.45 13061 - Media Specialist I 21.31 13062 - Media Specialist II 23.84 13063 - Media Specialist III 26.58 13071 - Photographer I 18.17 13072 - Photographer II 20.33 13073 - Photographer III 25.19 13074 - Photographer IV 30.81 13075 - Photographer V 37.27 13090 - Technical Order Library Clerk 19.18 13110 - Video Teleconference Technician 27.40 14000 - Information Technology Occupations 14041 - Computer Operator I 19.71 14042 - Computer Operator II 22.05 14043 - Computer Operator III 24.58 14044 - Computer Operator IV 27.32 14045 - Computer Operator V 30.25 14071 - Computer Programmer I (see 1) 24.68 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 4/12
14150 - Peripheral Equipment Operator 19.71 14160 - Personal Computer Support Technician 27.32 14170 - System Support Specialist 45.66 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 35.72 15020 - Aircrew Training Devices Instructor (Rated) 43.22 15030 - Air Crew Training Devices Instructor (Pilot) 51.80 15050 - Computer Based Training Specialist / Instructor 35.72 15060 - Educational Technologist 37.07 15070 - Flight Instructor (Pilot) 51.80 15080 - Graphic Artist 31.80 15085 - Maintenance Test Pilot Fixed Jet/Prop 44.86 15086 - Maintenance Test Pilot Rotary Wing 44.86 15088 - Non-Maintenance Test/Co-Pilot 44.86 15090 - Technical Instructor 28.68 15095 - Technical Instructor/Course Developer 35.08 15110 - Test Proctor 23.15 15120 - Tutor 23.15 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 13.78 16030 - Counter Attendant 13.78 16040 - Dry Cleaner 16.24 16070 - Finisher Flatwork Machine 13.78 16090 - Presser Hand 13.78 16110 - Presser Machine Drycleaning 13.78 16130 - Presser Machine Shirts 13.78 16160 - Presser Machine Wearing Apparel Laundry 13.78 16190 - Sewing Machine Operator 17.20 16220 - Tailor 17.95 16250 - Washer Machine 14.48 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 25.34 19040 - Tool And Die Maker 29.50 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.99 21030 - Material Coordinator 27.47 21040 - Material Expediter 27.47 21050 - Material Handling Laborer 15.89 21071 - Order Filler 17.06 21080 - Production Line Worker (Food Processing) 18.99 21110 - Shipping Packer 19.19 21130 - Shipping/Receiving Clerk 19.19 21140 - Store Worker I 14.57 21150 - Stock Clerk 18.75 21210 - Tools And Parts Attendant 18.99 21410 - Warehouse Specialist 18.99 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 36.14 23019 - Aircraft Logs and Records Technician 30.34 23021 - Aircraft Mechanic I 34.74 23022 - Aircraft Mechanic II 36.14 23023 - Aircraft Mechanic III 37.58 23040 - Aircraft Mechanic Helper 27.03 23050 - Aircraft Painter 33.27 23060 - Aircraft Servicer 30.34 23070 - Aircraft Survival Flight Equipment Technician 33.27 23080 - Aircraft Worker 31.81 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 31.81 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 34.74
II
23110 - Appliance Mechanic 27.66 23120 - Bicycle Repairer 18.92 23125 - Cable Splicer 37.24 23130 - Carpenter Maintenance 29.24 https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 5/12
23140 - Carpet Layer 32.02 23160 - Electrician Maintenance 33.00 23181 - Electronics Technician Maintenance I 27.20 23182 - Electronics Technician Maintenance II 28.46 23183 - Electronics Technician Maintenance III 29.71 23260 - Fabric Worker 26.47 23290 - Fire Alarm System Mechanic 32.85 23310 - Fire Extinguisher Repairer 26.15 23311 - Fuel Distribution System Mechanic 36.55 23312 - Fuel Distribution System Operator 30.32 23370 - General Maintenance Worker 23.59 23380 - Ground Support Equipment Mechanic 34.74 23381 - Ground Support Equipment Servicer 30.34 23382 - Ground Support Equipment Worker 31.81 23391 - Gunsmith I 26.15 23392 - Gunsmith II 28.86 23393 - Gunsmith III 31.52 23410 - Heating Ventilation And Air-Conditioning 30.08 Mechanic 23411 - Heating Ventilation And Air Contidioning 31.48 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 31.10 23440 - Heavy Equipment Operator 31.78 23460 - Instrument Mechanic 28.87 23465 - Laboratory/Shelter Mechanic 30.19 23470 - Laborer 15.89 23510 - Locksmith 27.66 23530 - Machinery Maintenance Mechanic 29.66 23550 - Machinist Maintenance 25.76 23580 - Maintenance Trades Helper 21.55 23591 - Metrology Technician I 28.87 23592 - Metrology Technician II 30.91 23593 - Metrology Technician III 31.23 23640 - Millwright 29.76 23710 - Office Appliance Repairer 27.28 23760 - Painter Maintenance 24.81 23790 - Pipefitter Maintenance 33.73 23810 - Plumber Maintenance 32.31 23820 - Pneudraulic Systems Mechanic 31.52 23850 - Rigger 28.87 23870 - Scale Mechanic 28.86 23890 - Sheet-Metal Worker Maintenance 28.60 23910 - Small Engine Mechanic 26.46 23931 - Telecommunications Mechanic I 37.51 23932 - Telecommunications Mechanic II 39.55 23950 - Telephone Lineman 41.88 23960 - Welder Combination Maintenance 26.04 23965 - Well Driller 31.52 23970 - Woodcraft Worker 31.52 23980 - Woodworker 26.15 24000 - Personal Needs Occupations 24550 - Case Manager 17.17 24570 - Child Care Attendant 14.19 24580 - Child Care Center Clerk 17.60 24610 - Chore Aide 13.90 24620 - Family Readiness And Support Services 17.17 Coordinator 24630 - Homemaker 19.55 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 31.14 25040 - Sewage Plant Operator 28.31 25070 - Stationary Engineer 31.14 25190 - Ventilation Equipment Tender 24.29 25210 - Water Treatment Plant Operator 28.31 27000 - Protective Service Occupations https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 6/12
27004 - Alarm Monitor 24.23 27007 - Baggage Inspector 16.78 27008 - Corrections Officer 33.59 27010 - Court Security Officer 31.82 27030 - Detection Dog Handler 18.95 27040 - Detention Officer 33.59 27070 - Firefighter 30.04 27101 - Guard I 16.78 27102 - Guard II 18.95 27131 - Police Officer I 32.08 27132 - Police Officer II 35.65 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 16.88 28042 - Carnival Equipment Repairer 17.95 28043 - Carnival Worker 13.36 28210 - Gate Attendant/Gate Tender 17.20 28310 - Lifeguard 13.45 28350 - Park Attendant (Aide) 19.25 28510 - Recreation Aide/Health Facility Attendant 14.04 28515 - Recreation Specialist 23.84 28630 - Sports Official 15.32 28690 - Swimming Pool Operator 19.81 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 27.51 29020 - Hatch Tender 27.51 29030 - Line Handler 27.51 29041 - Stevedore I 26.29 29042 - Stevedore II 29.25 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 44.42 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 30.63 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 33.73 30021 - Archeological Technician I 21.96 30022 - Archeological Technician II 24.57 30023 - Archeological Technician III 30.43 30030 - Cartographic Technician 30.43 30040 - Civil Engineering Technician 29.19 30051 - Cryogenic Technician I 33.47 30052 - Cryogenic Technician II 36.97 30061 - Drafter/CAD Operator I 21.96 30062 - Drafter/CAD Operator II 24.57 30063 - Drafter/CAD Operator III 27.39 30064 - Drafter/CAD Operator IV 33.70 30081 - Engineering Technician I 17.29 30082 - Engineering Technician II 19.42 30083 - Engineering Technician III 21.74 30084 - Engineering Technician IV 26.93 30085 - Engineering Technician V 32.93 30086 - Engineering Technician VI 38.49 30090 - Environmental Technician 30.43 30095 - Evidence Control Specialist 30.22 30210 - Laboratory Technician 26.25 30221 - Latent Fingerprint Technician I 36.82 30222 - Latent Fingerprint Technician II 40.67 30240 - Mathematical Technician 30.43 30361 - Paralegal/Legal Assistant I 20.44 30362 - Paralegal/Legal Assistant II 25.32 30363 - Paralegal/Legal Assistant III 30.97 30364 - Paralegal/Legal Assistant IV 37.46 30375 - Petroleum Supply Specialist 36.97 30390 - Photo-Optics Technician 30.43 30395 - Radiation Control Technician 36.97 30461 - Technical Writer I 35.08 30462 - Technical Writer II 42.92 30463 - Technical Writer III 51.92 https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 7/12
30491 - Unexploded Ordnance (UXO) Technician I 28.23 30492 - Unexploded Ordnance (UXO) Technician II 34.15 30493 - Unexploded Ordnance (UXO) Technician III 40.93 30494 - Unexploded (UXO) Safety Escort 28.23 30495 - Unexploded (UXO) Sweep Personnel 28.23 30501 - Weather Forecaster I 33.70 30502 - Weather Forecaster II 41.00 30620 - Weather Observer Combined Upper Air Or (see 2) 27.39 Surface Programs 30621 - Weather Observer Senior (see 2) 30.43 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 34.15 31020 - Bus Aide 17.64 31030 - Bus Driver 23.12 31043 - Driver Courier 18.02 31260 - Parking and Lot Attendant 15.49 31290 - Shuttle Bus Driver 19.16 31310 - Taxi Driver 15.68 31361 - Truckdriver Light 19.16 31362 - Truckdriver Medium 20.57 31363 - Truckdriver Heavy 24.05 31364 - Truckdriver Tractor-Trailer 24.05 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 16.65 99030 - Cashier 12.47 99050 - Desk Clerk 14.22 99095 - Embalmer 39.85 99130 - Flight Follower 28.23 99251 - Laboratory Animal Caretaker I 17.67 99252 - Laboratory Animal Caretaker II 18.95 99260 - Marketing Analyst 34.05 99310 - Mortician 39.85 99410 - Pest Controller 22.46 99510 - Photofinishing Worker 17.40 99710 - Recycling Laborer 22.29 99711 - Recycling Specialist 25.89 99730 - Refuse Collector 20.49 99810 - Sales Clerk 13.61 99820 - School Crossing Guard 15.51 99830 - Survey Party Chief 29.38 99831 - Surveying Aide 19.44 99832 - Surveying Technician 26.72 99840 - Vending Machine Attendant 18.57 99841 - Vending Machine Repairer 21.99 99842 - Vending Machine Repairer Helper 18.57
Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 8/12 to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:
HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.
Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.
HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.
22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. *
*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.
VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)
HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)
THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:
1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.
400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_s… 9/12 example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.
Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:
(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;
(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;
(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or
(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).
2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.
If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).
** HAZARDOUS PAY DIFFERENTIAL **
An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.
All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.
A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;
minimal damage to immediate or adjacent work area or equipment being used. All https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_… 10/12 operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.
** UNIFORM ALLOWANCE **
If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:
The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.
** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **
The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.
** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **
Conformance Process:
The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_… 11/12
(See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.
The process for preparing a conformance request is as follows:
1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).
2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.
3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.
Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).
4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.
5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.
6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).
Information required by the Regulations must be submitted on SF-1444 or bond paper.
When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage https://beta.sam.gov/wage-determination/2015-4036/15?index=wd&keywords=&is_active=true&sort=-modifiedDate&date_filter_index=0&date_rad_… 12/12 determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.
Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."
File details come from the government source that posted it. Updated .