Attachment 3 - Salient Characteristics.docx

DOCX document 23 KB Posted

Attached to
3D Systems 3D Printer or equal Federal contract opportunity
Solicitation number
FA301620U0080
Issued by
Department of the Air Force Air Education and Training Command

View the file

Other files for this federal contract opportunity

Other files attached to 3D Systems 3D Printer or equal, newest first.
File Type Posted
Attachment 1 - Clauses and Provisions.docx DOCX document
Attachment 2 - Schedule of Supplies.docx DOCX document
Combined Synopsis Solicitation.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ESSENTIAL CHARACTERISTICS FOR LARGE FORMAT

HIGH DEFINITION 3D STEREOLIGHOGRAPHY PRINTER

REQUIRED SPECIFICATIONS: Must be able to replace a 3D Systems Viper Si2 SLA System in dimensions and minimum specifications.

Dimensions: Must fit existing unit’s space W52.5 X D33.5 X H70 in. Unit may be 6” larger in any of the three dimensions. Up to W58.5 X D38.5 X H76 in. is acceptable Weight: 1,020 lbs. MAX. Replaces existing machine weight as approved by facility management.

Power Requirements: 100-240 VAC, 50/60 Hz. (15 amp. 115V – 8 amp. 230V). Existing is 15 amp. 115V preferred to avoid facility rewiring.

Operating Temperature Range: 64-82 Degrees Fahrenheit Laser: Solid State NdYVO4 or better; Wavelength: 354.7 nm; Power at vat: 100mW available for curing power Beam Diameter:

Standard Mode: 0.250 mm +/- 0.025 mm (0.010 +/-0.001 in.) or better High Resolution Mode: 0.075 mm +/- 0.015 mm (0.0030 +/-0.0005 in.) or better Build Layer Capability (for creation of high detail/ high accuracy medical models): Minimum: 0.02mm (.0001”) or smaller; Typical: 0.10mm (0.004”) or smaller VAT Capacity: Volume 32.21 L (8.5 U.S. gal). Approximate;

Maximum build envelope:

Standard Mode: 250 X 250 X250 mm (10 X 10 X10 in.)
High resolution Mode: 125 X 125 X250 mm (5 X 5 X10 in.)

Interchangeable vat: Yes (not absolutely necessary) Input Data Format: .stl, .slc Operating System: Microsoft Windows 10 (upgradeable to latest version) Network type and Protocol: Ethernet, IEEE 802.3 10/100 Base-T or higher System Warranty: One year from installation date to include parts, labor, and system software upgrades

Trade-In Information Manufacturer: 3D Systems Inc.

Model: Viper SI2 Serial NO: 04FB0346

File details come from the government source that posted it. Updated .