Attachment 2 Technical Capability Statement.pdf
PDF 301 KB Posted
- Attached to
- Hose Assembly Federal contract opportunity
- Solicitation number
- N4215823QE053
About this file
This document is an attachment to a solicitation for hose assembly products. It specifies technical requirements for three hose assembly configurations to be provided under contract line item numbers 0001 through 0003. The hose assemblies must meet specifications for hose type, fittings, length, and pressure testing. Each assembly must be hydrostatically proof tested to 2500 psi for one to five minutes and labeled to indicate test details. The vendor must certify compliance with all requirements by initialing the document. The related solicitation was issued by the Naval Sea Systems Command of the Department of the Navy for solicitation number N4215823QE053.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation N4215823QE053.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N4215823QE053 - Attachment (2)
Page 1 of 2 (Rev 1)
Vendor shall certify that item quoted meets the capabilities, features and specifications listed below and that vendor can assume all contractor responsibilities stated below by initialing at the bottom. In order to be considered for award, this must be completed and submitted with the vendor quote.
TECHNICAL CAPABILITES STATEMENT
General Specification for HOSE ASSEMBLY
Shall be provided with the following capabilities, features and specifications: Yes No
All specifications listed under CLIN 0001 thru 0003 – Extended Description
CLIN 0001 EXTENDED DESCRIPTION
HOSE ASSEMBLY,
1-1/2" ID X 60 FT LONG SAE 100R2AT HOSE (AEROQUIP P/N GH781-24 X 60FT),
TWO (2) EACH 1-1/2" STEEL FEMALE JIC/SAE 37 DEG SWIVEL FITTINGS
(AEROQUIP P/N 1AA24FJ24-24), (NO SUBSTITUTIONS)
AND TWO (2) EACH 1-1/2” CRES 37 DEG MALE FLARE PLUGS (SSP P/N J24P OR
EQUAL) INSTALLED ON EACH END.
ENSURE EACH HOSE ASSEMBLY IS PROOF TESTED TO 2,500 +100/-0 PSI FOR 1
TO 5 MINUTES IAW S6430-AE-TED-010. THE HOSE ASSEMBLY SHOULD NOT
SHOW ANY LEAKS, SIGNS OF WEAKNESS, TWISTING, DETERIORATION,
DEFORMATION, DAMAGE, BURST OR SHOW SIGNS OF FITTING SEAPRATION.
VENDOR SHALL LABEL EACH END OF EACH HOSE ASSEMBLY WITH A
PERMANENT TAG IDENTIFYING HYDROSTATIC PROOF TEST PRESSURE, DATE
OF TEST, AND TESTING ACTIVITY.
***CERTIFICATE OF COMPLIANCE REQUIRED***
***MERCURY FREE CLAUSE INVOKED***
CLIN 0002 EXTENDED DESCRIPTION
1-1/2" ID X 65 FT LONG SAE 100R2AT HOSE (AEROQUIP P/N GH781-24 X 65FT),
TWO (2) EACH 1-1/2" STEEL FEMALE JIC/SAE 37 DEG SWIVEL FITTINGS
(AEROQUIP P/N 1AA24FJ24-24), (NO SUBSTITUTIONS)
SHOW ANY LEAKS, SIGNS OF WEAKNESS, TWISTING, DETERIORATION,
DEFORMATION, DAMAGE, BURST OR SHOW SIGNS OF FITTING SEAPRATION.
VENDOR SHALL LABEL EACH END OF EACH HOSE ASSEMBLY WITH A
N4215823QE053 - Attachment (2)
Page 2 of 2 (Rev 1)
CLIN 0003 EXTENDED DESCRIPTION
1-1/2" ID X 70 FT LONG SAE 100R2AT HOSE (AEROQUIP P/N GH781-24 X 70 FT),
TWO (2) EACH 1-1/2" STEEL FEMALE JIC/SAE 37 DEG SWIVEL FITTINGS
(AEROQUIP P/N 1AA24FJ24-24), (NO SUBSTITUTIONS)
SHOW ANY LEAKS, SIGNS OF WEAKNESS, TWISTING, DETERIORATION,
DEFORMATION, DAMAGE, BURST OR SHOW SIGNS OF FITTING SEAPRATION.
VENDOR SHALL LABEL EACH END OF EACH HOSE ASSEMBLY WITH A
TECHNICAL CAPABILITY/CONTRACTOR RESPONSIBILITY CERTIFICATION
Vendor hereby certifies that vendor’s item meets or exceeds all specifications and contractor responsibilities stated in this solicitation, in their entirety, with no exceptions. __________ (initials)
DATE: _________________________________________
File details come from the government source that posted it. Updated .