Attachment 2 Technical Capability Statement (003).docx
DOCX document 29 KB Posted
- Attached to
- RELIEF VALVE Federal contract opportunity
- Solicitation number
- N42158-25-Q-E017
About this file
This is a Technical Capability Statement for solicitation N42158-25-Q-E017 issued by the Department of the Navy Naval Sea Systems Command (NAVSEA) for a Relief Valve.
The document specifies requirements for a CRES Relief Valve with 1-5/16"-12UN-2B inlet/outlet connections, having a capacity greater than 8 GPM, a set point of 550 +0/-20 PSI, accumulation less than 55 PSI, and repeatability less than 10 PSI. The specific part number required is Circle Seal P/N RV51-45-550, with no substitutes allowed. The procurement requires a Certificate of Compliance and invokes a mercury-free clause. Vendors must certify compliance with all specifications by initialing and dating the capability statement with their quote submission.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| N42158-25-Q-E017.pdf | ||
| COC 4292-ZN01.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
N421584292ZN01 – Enclosure (1)
Vendor shall certify that item quoted meets the capabilities, features and specifications listed below and that vendor can assume all contractor responsibilities stated below by initialing at the bottom. In order to be considered for award, this must be completed and submitted with the vendor quote.
TECHNICAL CAPABILITES STATEMENT
Relief Valve
| Shall be provided with the following capabilities, features and specifications: |
| Yes |
| No |
| RELIEF VALVE |
| : CRES, |
1-5/16"-12UN-2B INLET/OUTLET CONNECTIONS,
CAP > 8 GPM,
SET POINT = 550 +0/-20 PSI,
ACC < 55 PSI,
REP < 10 PSI,
CIRCLE SEAL P/N RV51-45-550
*NO SUBSTITUTES ALLOWED*
*CERTIFICATE OF COMPLIANCE REQUIRED*
*MERCURY FREE CLAUSE INVOKED*
TECHNICAL CAPABILITY/CONTRACTOR RESPONSIBILITY CERTIFICATION
Vendor hereby certifies that vendor’s item meets or exceeds all specifications and contractor responsibilities stated in this solicitation, in their entirety, with no exceptions. __________ (initials)
DATE: _________________________________________
Page 1 of 2 (Rev 1)
File details come from the government source that posted it. Updated .