Attachment 2- Specifications for DDSP Enclosed Dual Axle Trailer (6).pdf
PDF 103 KB Posted
- Attached to
- Enclosed Axle Trailers Federal contract opportunity
- Solicitation number
- SP330021Q0130
- Issued by
- Defense Logistics Agency Distribution
About this file
This document outlines specifications for six enclosed dual axle trailers being procured under solicitation SP330021Q0130 by the Defense Logistics Agency Distribution. Key requirements include trailers that are 48 feet in length with a 102-3/8 inch width, 13 foot 6 inch height, roll up doors measuring 93 by 103-1/2 inches, and able to accommodate two 22.5 inch wheels. Additional specifications cover axles, suspension, brakes, lighting and various components. The trailers will be delivered to Defense Distribution Depot Susquehanna in New Cumberland, Pennsylvania.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 0001 SP3300-21-Q-0130.pdf | ||
| Attachment 1-Statement of Work (SOW) enclosed dual axle trailers.pdf | ||
| Combined Synopsis-Solicitation SP330021Q0130.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DDSP SPEC for six (6) 48’ Enclosed Dual Axle Trailers
Quantity: Six (6) Width: 102-3/8" Length: 48' 0" Height: 13' 6" (110" inside) Door Opening: 93" x 103-1/2" - or manufacturer equivalent Door Type: Roll up door Upper Coupler Height: 47" King Pin Location: 36" Landing Gear Location: 104” from King Pin Tire / Wheel Size: 295/75R22.5 Tire Make: Bridgestone R195F, Hankook TL-01 or Cooper RM872 radial (Factory choice) Tire Inflation System: None Wheel Type: 22.5'' Steel Disc Wheel, Hub Piloted, 5HH Hubometer: Yes (required) Outboard Cast Drums: Yes (required), machine balanced Number of Axles: Two Axle Make: AXN 5" round axles with 7 year warranty and extended service brake lining- or manufacturer equivalent Wheel Seals: Stemco Guardian HP seals Bearing Lubrication: Chevron DELO Synthetic SF grease Spindle Nut: Pro-Torq Hubcaps: Stemco vented. Stemco Platinum Performance Plus System (5 year limited warranty)- or manufacturer equivalent Suspension: Three leaf spring suspension (Holland Ultralite II) with (air assisted pin puller)- or manufacturer equivalent Tandem Slide: 49" spread 216" slide rails (72" to 174" slide range) Brake Size & Type: 16.5" x 7" Air "S" - Cam Air Lines: 3/8" diameter front to rear ABS: Haldex 2S-1M with full function valve Slack Adjusters: Haldex automatic (6 year limited warranty) Brake Chambers: Haldex Gold Seal (4 year limited warranty) Landing Gear: Holland Atlas 55 with 10" x 10" RCF (10 year NoLube).
Galvanized bracing, 104" from King Pin (Limited Lifetime warranty) -or manufacturer equivalent Landing Gear Crank: Roadside (required)
Tire Carrier: No (Not required)
Crossmembers: Ahead of the Landing Gear Steel Hat Type on 12" Centers, 2" Deep Crossmembers: Over Landing Gear 4" Steel I-Beam Over Landing Gear, 12" Centers Crossmembers (Bay Area): 4" Steel I-Beam on 12" Centers Front Tire Protector Plates: None (Not required) X-member to Base Rail Attachment: Aluminum squeeze rivets Floor: 1-3/8" nominal 100% Oak with three 5/16" screws per board Threshold Plate: Heavy duty galvanized unitized forklift package and rear sill last 27" of trailer Scuff Band Sides: 12" x 18ga 80KSI corrugated steel above integral aluminum totaling 12" scuff.
Internal Bulkhead: 10ga x 12" smooth steel attached directly to front wall posts Nose Liner: 1/2" plywood full height with close out at bottom Ceiling Liner: None Side Panels: .313" Composite Plate (10 year warranty) Side Posts: Series "A" logistics posts on 48" centers.
Front Wall Panels: PPW Aluminum with 1/8" mill finish aluminum radius panels Front Wall Posts: 5-14ga x 2" deep hat section posts Roof Bows: 1" deep galvanized steel anti-snag on 16" / 24" centers Roof Material: .040 Aluminum pre-bonded to bows prior to installation Rear Frame Color: GALVANIZED Lock Rods per Door: One Hinges per Door: Five Rubber Dock Bumpers: One pair (4-hole) recessed between lights Rear under-ride guard: Reinforced for Dock-Lock operation. GALVANIZED Flaps Mtd. to Slider:24" x 27-1/2" white- or manufacturer’s equivalent Sealed Beam Lights: Optronics LED (Limited Lifetime Warranty) All Locations including license, Canada and California legal lights. Five lights rear header. Header lights with multi-light function (center three stop, outer turn), GloLights at rear Wiring Harness: Phillips split wiring harness with internal ground. (10 year warranty) 7-Way Receptacle: Phillips Q-Box (split pin without circuit breakers) Non corrrosive housing- or manufacturer’s equivalent Gladhands: Phillips surface mount, non swivel type offset to roadside, Annodized
Registration Holder: Truck-Lite 97960 or Phillips 16-802 or Optronics- or manufacturer’s equivalent
Rail Gate Prep: Rail gate mounting channels installed.
Undercoating: Pre-undercoated crossmembers and floor, Holland landing gear and suspensions have Black Armour coating, Hendrickson suspensions have black soft coat, Slide rails are sprayed with undercoat and inside of coupler is sprayed
Warranty: Standard manufacturer’s warranty.
Delivery Address:
DODAAC: SB3102
Defense Logistics Agency
Defense Distribution Depot Susquehanna, PA
(Truck Entrance: Intersection of Normandy Dr & Old York Rd)
BLDG 750, 3rd ST
New Cumberland, PA 17070
File details come from the government source that posted it. Updated .