Attachment 2 - SALIENT CHARACTERISTICS Crossover Utility Vehicle.pdf

SALIENT CHARACTERISTICS

for

Crossover Utility Vehicle

1.0. SCOPE OF EQUIPMENT:

All proposed products must meet or exceed the specifications outlined in this Salient Characteristics document. The products must be designed, manufactured, and tested to ensure compliance with all applicable requirements, including performance, safety, and environmental standards.

All items must be delivered to the 309th Aerospace Maintenance and Regeneration Group (AMARG) at the designated location, with the seller responsible for all costs and risks associated with transportation. The delivery terms are FOB (Free on Board) DESTINATION, which means that the seller is responsible for delivering the products to the AMARG facility, with the buyer taking possession of the products at the destination.

1.1. PRODUCT PERFORMANCE SPECIFICATION:

SPECIFICATIONS

Crossover Utility Vehicle Dimensions:

• The Crossover Utility Vehicle must meet the following dimensional requirements:

o Width: The overall width of the vehicle must not exceed 66 inches (167.6 cm).

o Height: The overall height of the vehicle must not exceed 78 inches (198.1 cm).

o Length: The overall length of the vehicle must not exceed 135 inches (342.9 cm).

o Wheelbase: The wheelbase of the vehicle must not exceed 94 inches (238.8 cm).

o Ground Clearance: The minimum ground clearance of the vehicle must be at least 5 inches (12.7 cm), measured from the lowest point of the vehicle's frame or axle to the ground.

o Tolerance and Measurement:

• All dimensions must be measured with a tolerance of ±1 inch (2.5 cm). The measurements must be taken at the widest, highest, and longest points of the vehicle, respectively.

• Note: NTE stands for "Not to Exceed", which means that the dimension must not be greater than the specified value.

Utility Vehicle cargo box Dimensions, Minimum Acceptance:

• The cargo bed of the Crossover Utility Vehicle/Other Government Motor Vehicle Convenience (OGMVC) must meet the following specifications:

o Length: The length of the cargo bed must be 43 inches (109.2 cm).

o Width: The width of the cargo bed must be 50 inches (127 cm).

o Height/Depth: The height or depth of the cargo bed must be 10 inches (25.4 cm).

o Weight Capacity: The cargo bed must have a weight capacity of at least 1000 pounds (453.6 kg).

o Dumping Mechanism: The cargo bed must be equipped with a manual dump mechanism, which allows the bed to be lifted and tilted for easy unloading of cargo.

• Dumping Mechanism Requirements:

o The manual dump mechanism must meet the following requirements:

o Lifting Capacity: The dumping mechanism must be capable of lifting the cargo bed to a height of at least 45 degrees from the horizontal position.

o Tilting Capacity: The dumping mechanism must be capable of tilting the cargo bed to a position that allows for easy unloading of cargo.

o Locking Mechanism: The dumping mechanism must be equipped with a locking mechanism that secures the cargo bed in the upright position, preventing accidental dumping or tilting.

Utility Vehicle Cab specs:

• Cab Frame to include:

o Covered Metal Roof: A metal roof that is fully covered with a durable, weather-resistant material, such as a vinyl or fabric coating, to provide protection from the elements.

o Front Windshield: A front windshield that is made of laminated glass or other shatter-resistant material and is designed to provide optimal visibility and protection from the elements.

o Rear Windshield: A rear windshield that is made of laminated glass or other shatter-resistant material and is designed to provide optimal visibility and protection from the elements.

o Wipers: A windshield wiper system that includes two wiper arms and blades and is designed to provide effective clearing of the front and rear windshields.

o Electrical Kit: A complete electrical kit that includes all necessary wiring, connectors, and components to support the installation and operation of the cab frame, including:

Wiring harnesses and connectors Switches and controls Lighting and electrical accessories (e.g. dome lights, courtesy lights) Electrical grounding and bonding components

• Bench Seat.

• Door Requirement:

o Must be equipped with full doors on both the driver and passenger sides.

o Each door must have a window that can be rolled down for ventilation and accessibility.

o The windows must be made of a durable, shatter-resistant material, such as glass or polycarbonate.

o The doors and windows must be designed to provide a secure and weather-tight seal when closed.

o The roll-down windows must be capable of being fully lowered and raised as needed and must have a secure latching mechanism to hold them in place.

• Interior Door Panel:

o A complete interior door panel kit, including all necessary hardware and fasteners, must be installed in each Crossover Utility Vehicle. The door panel must be designed to provide a finished interior appearance and must be compatible with the vehicle's existing door and interior components.

o The interior door panel must be installed by the manufacturer or an authorized dealer prior to delivery.

• Head Liner:

o A head liner, also known as a headliner or ceiling liner, must be installed in each Crossover Utility Vehicle. The head liner must be designed to provide a finished interior appearance and must be compatible with the vehicle's existing roof and interior components.

o The head liner must be installed by the manufacturer or an authorized dealer prior to delivery.

• Storage such as a glove box.

• Digital Display must cover:

o System Diagnostic Light: A warning light that illuminates when a system malfunction is detected, such as a fault in the engine, transmission, or other critical systems.

o Speed: A digital display of the vehicle's speed in miles per hour (mph) or kilometers per hour (km/h).

o RPM: A digital display of the engine's revolutions per minute

(RPM).

o 4WD Indicator: A light or icon that indicates when the vehicle is in four-wheel drive (4WD) mode.

o Fuel Level Indicator: A mechanical fuel level indicator that provides a visual representation of the fuel level in the tank, with markings or graduations to indicate the fuel level as a percentage of full or in gallons/liters.

o Coolant Temperature: A digital display of the engine coolant temperature in degrees Fahrenheit (°F) or degrees Celsius (°C).

o Hour Meter: A digital display of the total hours of operation, which can be used to track maintenance schedules and monitor vehicle usage.

o Miles: A digital display of the Crossover Utility Vehicle odometer reading in miles or kilometers.

o Park Brake Light: A warning light that illuminates when the parking brake is engaged, reminding the operator to release the brake before operating the vehicle. Side mirrors

• Seatbelts with manufactured installed seat belt extender option.

Utility Vehicle Engine specs:

• The engine must be a 4-cycle diesel engine, with a minimum of 3 cylinders or equivalent.

• Fuel Compatibility: The engine must be compatible with JP-8 diesel fuel, which is a standard military diesel fuel specification.

• Cooling System: The engine must be equipped with a liquid cooling system, which includes an electric fan to provide adequate cooling in all operating conditions.

• Electrical System:

o Battery: The vehicle must be equipped with a battery that meets or exceeds the following specifications: 80 Cold Cranking Amps (CCA) at -18°C (0°F).

o Alternator: The vehicle must be equipped with an alternator that meets or exceeds the following specifications: 55 amps at 7,000 rpm, regulated to provide a stable voltage output.

• Speed Requirements:

o Maximum Traveling Speed: The vehicle must be capable of achieving the following maximum traveling speeds:

High forward gear: 0-32 mph (0-51 km/h) Low forward gear: 0-15 mph (0-24 km/h) Reverse gear: 0-17 mph (0-27 km/h)

Utility Vehicle drivetrain specs:

• Transmission:

o The transmission must be a Continuously Variable

Transmission (CVT) with a clutch enclosure and high-speed fan, or a manufactured standard equivalent that provides similar performance and functionality.

o The transmission must be designed to provide smooth and seamless shifting between gear ratios, with minimal vibration and noise.

• Four-Wheel Drive:

o The vehicle must be equipped with a mechanically actuated four-wheel drive system, which allows the operator to engage and disengage four-wheel drive mode as needed.

o The four-wheel drive system must be designed to provide maximum traction and control in a variety of terrain and weather conditions.

• Traction Assist:

o The vehicle must be equipped with a positive locking, mechanically actuated traction assist system, which can be engaged and disengaged by the operator as needed.

o The traction assist system must be designed to provide additional traction and control in low-traction situations, such as mud, snow, or ice.

• Payload Capacity:

o The vehicle must have a minimum payload capacity of 1400 pounds (635 kilograms), which must be certified by the manufacturer through testing and validation.

• Towing Capacity:

o The vehicle must have a minimum towing capacity of 1300 pounds (590 kilograms), which must be certified by the manufacturer through testing and validation.

Utility Vehicle suspension specs:

• Front Suspension:

o Type: Fully independent dual A-Arm suspension with adjustable coils.

o The coil springs must be adjustable.

• Rear Suspension:

o Type: Fully independent dual A-Arm suspension with adjustable coils.

o Coil Springs: The coil springs must be adjustable

Utility Vehicle brake specs:

• Type: The braking system must be a front/rear hydraulic disc brake system, with front calipers that provide reliable and consistent braking performance.

o Front Calipers: The front calipers must be hydraulic disc.

o Rear Brakes: The rear brakes must be hydraulic disc brakes.

• Park Brake: The park brake must be a hand-operated brake that is capable of holding the Crossover Utility Vehicle in place.

Utility Vehicle tire/wheel specs:

• Front Tires:

o Type: Desert-capable tires that are designed to provide traction and durability in desert environments.

o Rim: Steel rims that are designed to withstand the rigors of off-road driving and desert environments.

• Rear Tires:

o Type: Desert-capable tires that are designed to provide traction and durability in desert environments.

o Rim: Steel rims that are designed to withstand the rigors of off-road driving and desert environments.

Utility Vehicle features:

• Color:

o The Crossover Utility Vehicle must be painted in a color that is like Olive Drab (OD) or other earth-toned colors that provide a low-visibility profile.

o High-visibility colors, such as yellow or orange, are acceptable for safety reasons, but must be approved by the contracting officer.

• Fuel Capacity:

o The Crossover Utility Vehicle must have a fuel tank with a minimum capacity of 7 US gallons (26.5 liters).

• Hitch:

o The Crossover Utility Vehicle must be equipped with a standard 2-inch (5.1 cm) receiver hitch, which must be capable of accepting a variety of trailers and towed equipment.

o The hitch must be designed to provide a secure connection between the vehicle and the trailer and must be rated for a minimum towing capacity.

Manufacture/Safety Specs:

• Country of Manufacture:

o The Crossover Utility Vehicle must be manufactured in the

United States, with a minimum of 50% of the vehicle's components and labor sourced from the United States.

• The Crossover Utility Vehicle must be equipped with the following safety features:

o Neutral Start Safety Interlock: The vehicle must have a neutral start safety interlock system that prevents the engine from starting unless the transmission is in neutral gear. This system must be designed to prevent accidental starts and ensure safe operation.

• Electrical Kit: The vehicle must be equipped with a comprehensive electrical kit that includes, but is not limited to, the following components:

o Emergency Flashers: A system of flashing lights that can be activated in emergency situations to alert other drivers and pedestrians.

o Turn Signals: A system of lights and indicators that signal the vehicle's intention to turn or change direction.

o Brake Lights: A system of lights that illuminate when the vehicle's brakes are applied, warning other drivers and pedestrians of the vehicle's intention to slow or stop.

o Headlights: A system of lights that provide illumination for the vehicle's operator, with an on/off switch to control the lights.

o Push Button Horn: A horn that can be activated by a push button to alert other drivers and pedestrians.

o Seat Belt Reminder Alarm: An alarm that reminds the vehicle's operator to wear a seat belt, with a visual and audible warning system.

• Electrical System Requirements:

o The electrical system must meet the following requirements:

o Voltage: The electrical system must operate at a voltage of

12V DC, with a minimum of 50 amps of current available for accessories and equipment.

o Fuses and Circuit Breakers: The electrical system must be protected by fuses and circuit breakers that are designed to prevent overloads and short circuits.

o Wiring and Connectors: The electrical system must be wired with high-quality, durable wiring and connectors that are designed to withstand the rigors of off-road operation.

Warranty • 1 year/1000hr industrial standard warranty

• 3 year/10,000hr extended warranty