Attachment 2_EDL_Packaging.pdf
PDF 1 MB Posted
- Attached to
- Base Notice: Multi-NSN LTC w/ Exclusive Distributor; AAR Corp Federal contract opportunity
- Solicitation number
- SPRHA1-23-R-7001
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides packaging requirements and instructions for a federal contract opportunity. It specifies that items must be packaged and marked according to MIL-STD-2073-1 and MIL-STD-129 for military packaging and marking. All wood packaging materials like pallets and containers must comply with ISPM 15 regarding debarked, heat-treated wood and certification. Hazardous materials must be prepared for shipment under applicable CFR and ICAO regulations. The contractor must provide coded packaging data and special instructions per MIL-STD-2073-1, DD Form 2326, and DD Form 2169. Engineering drawings are included for an F-16 combustion chamber item with requirements to mark for unique identification and comply with data release restrictions.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Letter Solicitation.pdf | ||
| Attachment 1.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
For the best experience, open this PDF portfolio in
Acrobat X or Adobe Reader X, or later.
Get Adobe Reader Now!
http://www.adobe.com/go/reader
PACKAGING REQUIREMENTS
AFMC FORM 158, 20221014
CONTRACT, PR. MIPR, DOCUMENT NUMBER 3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES PACK
(X) (A/B)
COMMERCIAL
ASTM D3951
PACKPRES
(X) (X)
SPECIAL
PACKAGING
INSTRUCTION
NUMBER
2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates or required specifications)
A. ENGINEERED OR SPECIALIZED CONTAINER (CDRS) ITEM NAME(s) OR
NSN/MMAC
B. PACKAGING OF HAZARDOUS MATERIALS ITEM NAME(s) OR NSN/ MMAC FAR Clause 52.223-3, Hazardous Material Identification and Material Safety Data
C. PACKAGING DATA (Coded and/or Special Packaging Instructions) ITEM NAME(s) OR NSN/MMAC FAR Clause 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in Acquisition Streamlining and Standardization Information System
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
ORGANIZATION PACKAGING SPECIALIST (Typed Name)
QUP ICQ MOP CD CT UNIT
CONT
INT
CONT UCL SPECIAL
MARKINGS
UNIT
PACK
WEIGHT
LENGTH
OPI
WIIDTH
DEPTH
CUBE
PACKAGING SPECIALIST SIGNATURE DATE
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
ITEM(S) CUSH
DUNN
WRAP
MTL
PRES
AFMC FORM 158, 20221014 Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e) International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD- 2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special Packaging Instructions, apply.
AFMC FORM 158, 20221014
3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions as indicated below. See reverse Section 3(b) for specific instructions.
1. PACKAGING & MARKING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 , represents Military Preservation (PRES) and Packing (PACK). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit Pack (QUP) is abbreviated. All Container Markings shall be IAW: MIL-STD-129 , Military Marking for Shipment and Storage. All wooden lumber, pallets and containers produced entirely or inpart of wood shall comply with International Standards for Phytosanitary Measures No. 15 (see reverse).
ITEM ID
QUP
MIL-STD-2073-1
PRES
PACK
(X)
(A/B)
COMMERCIAL ASTM D3951
PACK
PRES
(X)
(X)
SPECIAL PACKAGING INSTRUCTION NUMBER
4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1
QUP
ICQ
MOP
CD
CT
UNIT CONT
INT CONT
UCL
SPECIAL MARKINGS
UNIT PACK WEIGHT
UNIT PACK LENGTH
OPI
UNIT PACK WIIDTH
UNIT PACK DEPTH
UNIT PACK
CUBE
PREVIOUS EDITIONS ARE OBSOLETE
Page 1 of 2 Pages
ITEM(S)
CUSH DUNN
WRAP MTL
PRES MTL
AFMC FORM 158, 20221014
Page 2 of 2 Pages
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE
REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS
SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN
BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND
PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER
BASES).
WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM
DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE
LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”
3(b). INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate vendor packaging instructions in Section D for corresponding selections from page 1 Section 3.
A. Engineered or Specialized Containers (CDRS)
a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1 ,Standard
Practice for Military Packaging). Modifications of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 , Container Design and Retrieval System (CDRS) Search Request (b) Air Force acceptance of proposed new engineered or specialized containers shall be by written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements. (c) When accepted, the Contractor shall comply with DI-PACK-80684 , Container Design and Retrieval System (CDRS) Data Input.
B. Packaging and Marking of Hazardous Material
Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation: (a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200; (b) Code of Federal Regulations (CFR) Title 49; (c) Air Force Manual (AFMAN) 24-604, Preparing
Hazardous Materials for Military Air Shipment; (d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and (e)
International Maritime Dangerous Goods (IMDG) Code. Contractor shall comply with DI-PACK-81059 .
C. Packaging Data (Coded and/or Special Packaging Instructions)
The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MILSTD-
2073-1 , Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK-80120 , Preservation and Packing Data, and DI-PACK-80121 , Special
Packaging Instructions, apply.
11.0.1.20130826.2.901444.899636
TextField1: 406 SCMS/GULAA
TextField1: WENDY MONSON 777-1457
CheckBox1: 0
CheckBox1: 0
CheckBox1: 1
SignatureField1:
DateField1: 20221129
TextField3:
TextField3: O
TextField3: O
TextField3: O
TextField3: 016779854
TextField3: 016779545
TextField3: 016775704
TextField3: 016779545
TextField3: 016779854
TextField3: 016775704
TextField3: 001
TextField3: 001
TextField3: 001
TextField3: X
TextField3: X
TextField3: X
TextField3: B
TextField3: B
TextField3: B
TextField3: F000001E36
TextField3: F000001E53
TextField3: F000001E36
TextField3: 0.406
TextField3: 1.969
TextField3: 1.969
TextField3: 4.50
TextField3: 12.50
TextField3: 12.50
TextField3: 12.50
TextField3: 16.50
TextField3: 16.50
TextField3: 12.50
TextField3: 16.50
TextField3: 16.50
TextField3: 4.5
TextField3: 4.60
TextField3: 4.60
TextField3: 17
TextField3: 17
TextField3: 17
TextField3:
TextField3: B
TextField3: B
TextField3: B
TextField3:
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 36
TextField3: ED
TextField3: ED
TextField3:
TextField3: D
TextField3: D
TextField3: D
TextField3: GE
TextField3: GE
TextField3: GE
TextField3: GH
TextField3: GH
TextField3: GH
TextField3: 0
TextField3: 0
TextField3: 0
TextField3: 1
TextField3: 1
TextField3: 1
TextField3: 10
TextField3: 10
TextField3: 10
TextField3:
TextField3: 00
TextField3: 00
TextField3: 00
TextField3: 001
TextField3: 001
TextField3: 001
TextField4:
CheckBox2: 0
CheckBox2: 0
CheckBox2: 0
ENGINEERING DATA LIST
DATE:
24 FEB 2021
REVISION: 2 *HISTORY*
CAGE:
55820
PAGE:
NSN:
2835015237610RP
DATA TECH:
Ropelato, Melynda
END ITEM:
F-16 POWER SYSTEMS
ORGANIZATION/OFFICE SYMBOL:
429 SCMS GUMACA/
MANUFACTURER NAME:
RAYTHEON TECHNOLOGIES CORPORATION
REFERENCE NUMBER:
170950-100B
NOUN:
CHAMBER,COMBUSTION,
LINE/
SUB CAGE
ENG DRAWING NUM/ ACCOMP
DOC NUM REV
NR
SHEETS
FURN
CODE
DIST
CODE NOUN REMARKS
L 98747 200733803 D S D LABEL, UNIQUE
IDENTIFICATION (UID)
Ropelato, Melynda 24 FEB 2021
W/EO 10A1486-H & 10A1433-H
NAME: DATE:
STANDARD ENGINEERING TEXT
Ropelato, Melynda 24 FEB 2021
RELEASE OF THIS DATA TO A FOREIGN OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE.
NAME: DATE:
C - CLASSIFIED DOCUMENT.
S - FURNISHED WITH SOLICITATION.
M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH
CONTRACT AWARD.
X - DATA SUPPLIED (NOT IN JEDMICS).
R - FURNISHED BY PCO UPON REQUEST.
P - PARTIAL DOCUMENT FURNISHED.
V - VENDOR DRAWING; (NOT PROVIDED).
G - GOV'T DOCUMENT.
O - OTHERS, CONTRACTOR MUST ACQUIRE.
A- DATA NOT AVAILABLE.
FURNISHED METHOD CODE LEGEND:
Page 1 of 1EDL Version 2Generated by PRPS using Jasper Reports on 15 Sep 2022
PURCHASE INSTRUMENT NUMBER: VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA MIL-STD-2073-1 / No Packaging Available MIL B
ITEM(S):
2835015237610RP
CODED DATA:
QUP ICQ
METH CD
WRAP
CUSH
DUNN CT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
LENGTH
WIDTH
DEPTH
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
Marking of Warranted Items The contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with FAR 46.706(b) (5), Warranty Terms and Conditions.
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Monson, Wendy L
PHONE NUMBER:
801-777-1457 / 777-1457
SIGNATURE:
//SIGNED//Monson, Wendy L
DATE:
22060 - 01 MAR 2022
Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 16 Mar 2022
File details come from the government source that posted it. Updated .