Attachment 1 - Statement of Work Band Saw.pdf

Statement of Work (SOW) New Band Saw for DDOO

Background:

a. Requiring Organization Defense Distribution Depot Oklahoma City, OK.

b. History

A new band saw is required to replace safety deficient machine currently in place that is unusable.

c. Purpose of the Statement of Work (SOW):

Purchase new band saw, at a quantity of one (1) each.

Scope of Work to be Performed by Contractor:

The contractor shall provide all necessary labor and material to construct one new band saw. All equipment furnished shall be new from the manufacturer’s most current production and meet current industry standards and conform to the best quality of materials and workmanship. Accessories not specifically mentioned herein, but necessary to furnish a complete system ready for use, shall also be included and named in your offer. All transportation/shipping and installation shall be provided by the contractor.

The Band Saw must be equivalent to or greater than the below listed salient characteristics.

Salient Characteristics:

• Wheel Face 2”

• Table Size 36” x 36” minimum

• Front edge of table to teeth minimum 12”

• Cap under guide 30”

• Table tilt to right 45 deg

• Table tilt to left 5 deg

• Horizontal cap 35.5”

• Table Height 42”

• Wheels: Aluminum disc with dismountable tire

• Brakes: Lower wheel foot operated, Upper wheel automatic

• Wheel circumference 36”

• 4.5” Dust outlet

• Voltage: 230V, 3ph

• 7.5hp constant drive motor 600-5600 FPM

• Rack and pinion adjustable guidepost

• Double face rip fence

• 110vac work light

• Power cut off switch when foot brake applied

• Air Nozzle

Exterior color – Manufacturers Standard.

Warranty Coverage - Warranty coverage shall be manufacturer’s standard warranty but not less than one-year parts and labor.

Operator, Parts and Service Manual(s) and Training – The contractor shall provide with delivery, one (1) complete set of manuals specific to the band saw.

Definitions of Terms and Abbreviations:

a. DDOO - Defense Depot, Oklahoma City, OK

b. SOW - Statement of Work

Description of Contractor’s Tasks:

Task 1: Fabricate, deliver and install one new band saw in accordance with this

SOW.

Certification and Acceptance:

Final acceptance of the Band Saw will be performed by personnel at the receiving location (DDOO).

Project Management Approach:

N/A

Performance and/or Delivery Schedule:

The contractor shall coordinate the delivery with Tambren Ghoram, Phone 405- 822-3822, email tambren.ghoram@dla.mil.

Shipping Location:

Defense Logistics Agency Defense Distribution Depot, Oklahoma City OK 3420 D Ave. Building 1 Door 80 Tinker AFB, OK 73145 ATTN: Tambren Ghoram @ 405-822-3822