Attachment_1_-_Statement_of_Work_and_Specs.pdf

Attachment 1 – Statement of Work

STATEMENT OF WORK FOR

MCC Electrical Panels and Rail

Mount Meter and Remote Display

INTRODUCTION

The Yuma Area Office (YAO) within the Bureau of Reclamation (Reclamation) currently operates four high-capacity production well systems in the Yuma area. The well fields have been established under various congressional acts to control groundwater levels and meet contractual obligations with various water districts for draining the Association Lands, provide return flows for delivery and water to Mexico to meet treaty obligations, and to provide return flow credits for the various water districts. In order to meet current and future commitments, new and replacement wells will be needed on a regular basis.

Reclamation needs the flexibility to have new and replacement wells designed and drilled using current industry standards and meeting Arizona State Requirements.

PROJECT OBJECTIVE

The objective of this purchase requisition is to receive and install materials to establish new wells to produce an additional 25,000-acre feet of low-salinity water that will be conveyed North to the Colorado River and delivered to Mexico, thereby conserving like amounts in Lake Mead.

The 25,000 AF is in addition to the 25,000 AF that is to be produced by the 242 Wellfield.

SPECIFICATIONS

MCC Electrical Panels and Rail Mount Meter and Remote Display

Panels and Rail Mount Meter and Remote Display should come with a warranty.

See attached specification sheet.

SHIPPING AND DELIVERY OF MATERIALS

The supplier shall transport and handle products in accordance with the manufacturer’s instructions.

Inspect shipments prior to shipment to ensure products comply with requirements, quantities are correct, and that they are undamaged.

All items shall be delivered to the Bureau of Reclamation Yuma Area Office.

Deliver address: Yuma Area Office, 7301 Calle Agua Salada, Yuma, AZ 85364.

Attachment 1 – Statement of Work Warehouse deliveries are Monday thru Thursday 7am to 4pm.

Point of contact for deliveries is Larry Arnold. He can be reached at 928-343-8525 or larnold@usbr.gov.

SUBMITTAL REQUIREMENTS

General – The Contractor shall furnish all materials to the Government, in accordance with this paragraph and the requirements in the provisions, clauses, and paragraphs of this solicitation.

The word ‘submittals’ shall be interpreted to include drawings, data, manuals, certifications, samples, and other items furnished by the Contractor for approval, informational, or other purposes.

Within five (5) days of contract award, the Contractor will furnish a final fully generated set of MCC’s schematic’s compartment layout, equipment and bill of materials of the motor control centers in order for Reclamation to complete the final electrical design.

Yuma 242 MCC Equipment – Spec Sheet

1. MCC (Motor Control Center)

a. 800 amps MJ 480/277V 3 pole main 65kAIC with 2X-10X instantaneous setting

b. 65kA withstand rating

c. Incoming section fed from bottom

d. Outgoing motor feeders and power feeders from bottom

e. Incoming section at left

f. Hardwire control

g. 600 VAC

h. NEMA Type 3R with IR viewing windows

i. Provide Nameplates

j. Provide mimic bus in phonelic plate

k. Double barrel main lugs and lugs for the soft starter, 600MCM for the main and

500MCM for the starter

l. Modules for MCC

i. Combination Altistart 48 Soft Start (bypass included)

1. 400 type

2. C59 series starter frame

ii. Power Logic Power meter

1. PM870 (type)

2. PM8M2222 (I/O device)

3. CT included for the device

iii. 3 Thermal-Magnetic Case Circuit breaker

1. 2 - 60 amp & 1 20 amp (150 amp frame)

2. 480 VAC

3. HG, stand alone rated at (35kA)

iv. 240VAC Fusible Single Phase Transformer

1. 15 kVA

v. Distribution Panel board

1. 1-phase Type NQ bolt on

2. 18 spaces

3. 4 - 240 VAC 30 amp breakers (2EA 2-Pole 240V)

4. 6 – 120 VAC 20 amp breakers (10EA 1-pole 120V)

m. Infrared (IR) Window

MICHAEL

BANTING

Digitally signed by

MICHAEL BANTING

Date: 2022.10.12 07:52:44 -07'00'