Attachment 1 - Specifications.pdf

Flatbed Trailer Specifications

COLOR – Gray or black

Capacity – 35,800 kg or greater

CHASSIS – Standard EU length trailer made of high quality and high strength steel, in compliance with Standard ISO 1726-2 and ISO 1726. Made of two welded longitudinal beams in "I" form with cross beams at needed distances. Reinforced with KTL protection or equivalent with 10 years warranty for perforation. Cataphoretic coating for anti-corrosion, Hardwood coated, 30mm thick and water-resistant flooring.

ELECTRICAL REQUIREMENTS - 12V and 24V LED side position lamps and 2x7 and 1x15 pin sockets, 12V/24V EU and US electrical tractor plugs.

AIR REQUIREMENTS – EU and US interchangeable air/gladhands

LOAD SECURING – K-Fix with 96 holes per side rail which increases load lashing varieties. Each load strapping point has a load capacity of 2.500 kg. Additional 7x2 units of lashing rings placed on the floor with a capacity of 5.000 kg. 7x2 lashing rings with 5-ton capacity on the floor. 10 x 2 units 83 x 83 mm pillar pockets on side rails plus 4 rows of 18 units 83 mm x 83 mm pillar pockets on the floor with 20 pillars 800*mm high. Equipped with a pillar storage. Pillar storage is positioned under the chassis in cases*where the height of the bollard is greater and/or equal to the front panel and in other cases where it is positioned on the front panel.

EQUIPMENT – 2 Fire extinguisher, 4 “wide vehicle” placards, 2-wheel chocks and holder, 1 plastic toolbox with dimensions 500x480x1,000 mm (h x d x w) in front of the axles.

AXLE - Rigid, Single-reduction, triple axle with 1st axle lifting system

SUSPENSION – Air suspension

BRAKES - Anti-braking system (ABS) and rolling control system suitable for UN ECE R13 regulation. EBS 2S / 2M braking system of WABCO brand with electro-pneumatic dual circuit that contains power supply

(RSS) and voltage supply (12V) and (24V)

BRAKES – Air Disc brake

OTHER REQUIREMENTS – Includes spare tire/wheel

Side Curtain Trailer (w/Anti-theft curtain technology) Specifications

COLOR – Gray or black

Capacity – 32,000 kg or greater

CHASSIS - Standard EU length trailer made of high quality and high strength S460 MC Steel, compliant with Standard ISO 1726-2. Made of two welded longitudinal beams in "I" form with cross beams at needed distances. LED front, side, and rear lighting system. 24,000kg permissible load capacity landing gear. 35 mm hardwood floor with omega profiles, permissible for fork-lift axle load of 9.500 kg compliance with DIN EN 283, Equipped with Anti-theft curtain which is made of 900 gr /mt 2 material at both side/ Anti-theft side curtains, reinforced with 200 x 200 x 1,200 mm woven wire.

ELECTRICAL REQUIREMENTS – dual voltage 12V and 24V LED front, side, and rear lighting system, 2x7 and 1x15 pin sockets, 12V/24V EU and US electrical tractor plugs.

AIR REQUIREMENTS – EU and US interchangeable air/gladhands

LOAD SECURING – K-Fix with 118 holes every 70mm per side rail which increases load lashing varieties.

Each load strapping point has a load capacity of 2.5 tons. Equipped with tensioning rods at the front and rear for easy tensioning and to open side curtains from the front and rear. Pallet stoppers 15 mm high on both sides. 2x4 rows of 120 mm high wooden side planks.

EQUIPMENT/STORAGE – 2 Fire extinguisher boxes, 4 “wide vehicle” placards, 2-wheel chocks and holder, 1 plastic toolbox with dimensions 500x480x1,000 mm (h x d x w) in front of the axles, rear sliding ladder for rear entrance, AXLE - Rigid, Single-reduction, triple axle with 1st axle lifting system

SUSPENSION – Air suspension

BRAKES - Anti-braking system (ABS) and rolling control system suitable for UN ECE R13 regulation. EBS 2S / 2M braking system of WABCO brand with electro-pneumatic dual circuit that contains power supply

(RSS) and voltage supply (12V) and (24V)

OTHER REQUIREMENTS – Includes spare tire/wheel