Attachment 1 - SOW.pdf

Statement of Work (SOW) for Wheel & Tire

Travis AFB, 60 MXS/MXMTA, Stationary Nitrogen Generator servicing:

BAUER Compressors, SNGII-MVT

The purpose of this statement of work is to define the services and parts that must be supplied by the servicing vendor for our Stationary Nitrogen Generator.

Description: The contractor shall perform the annual and the 2000 hour service in accordance with the manufacturers recommendations found in the equipment manual.

The contractor shall provide OEM certified technician(s) qualified to perform maintenance, repair or servicing on this specific model/type.

Service Parts: The contractor will source and replace the following service parts:

058823A Oil Removal Cartridge

058826A Dryer Cartridge

N25326 Oil Filter Element

BET-0100 x2 Main Drive V-belts, 50 Or 60 Hz Drive

OIL-0024/GAL x2 Synthetic Oil

061858 Oil And Water Separator Element, Small

061859 Oil And Water Separator Element, Large

N04586 O-ring For Oil And Water Separator

N15273 x2 Intake Valve

N15274 x2 Discharge Valve

81409 x2 Intake Valve

14121 x2 Discharge Valve

GKT-BK15.3II Gasket, O-ring and Seal Kit

ELM-0185 Pre-coalescer Filter Element

ELM-0186 Post-coalescer Element

ELM-0187 Activated Carbon Filter Element

VAL-0376 x3 Internal Filter Bowl Automatic Drain Valve

IND-0028 Oxygen Monitor Sensor Cell

R-0771 Air Filter Element

R-0333 Oil Filter Element

R-12101 Air / Oil Separator Element

OIL-0007/GAL x2 Synthetic Oil

Point of Contact: The contractor shall coordinate with current and future equipment custodians of 60 MXS/MXMTC or MXMTA to replenish inventory of servicing items

(wheel bearings etc).

Special Requirements: The servicing will include changing the purification filters, oil & oil filters, replace and calibrate the oxygen sensor, checking of the safety shutdowns, complete systems check, and NFPA air test with certificate.

Qualifications/Certifications: The contractor shall be a certified BAUER service supplier