Attachment 1-Power Rectifier Description.pdf
PDF 280 KB Posted
- Attached to
- Eltek Flatpack S-Intrepid Series Power System (1800W Model) or Equal Federal contract opportunity
- Solicitation number
- 697DCK-21-R-00279
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 2-FAA-G-2100H.pdf | ||
| Solicitation No.697DCK-21-R-00279.pdf | ||
| Attachment 3-Vendor Response Sheet.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Power Rectifier Description
The rectifier provided will be used in Fiber Optic Transmission System (FOTS) and must meet the following FAA requirements.
1. Provide -48Vdc to Channel Banks (CB) and Add-Drop Multiplexers (ADM)
2. Comply with FAA-G-2100H attached for inrush current, harmonics, ripple, and power factor requirements
3. Carry the maximum load as specified by the manufacture
4. Have the ability to configure the system settings
5. Report alarms for AC failure, battery on discharge, tripped fuses and flipped battery breaker
6. Support remote battery testing
7. Be equipped with a Low Voltage Battery Disconnect (LVBD)
8. Perform load sharing when multiple rectifier modules are present
FAA has already performed testing for various power rectifiers and Eltek Flatpack S-Intrepid
Series Power System (1800W Model) has been approved to meet all the specifications required.
An equal may be provided but the vendor has to supply detailed specifications to enable FAA’s thorough review. Vendors that provide an equal without complete and detailed specifications will be considered unresponsive and hence eliminated automatically without further correspondence.
File details come from the government source that posted it. Updated .