Attachment 1 - Drill Press SOW.docx

Statement of Work (SOW) Drill Press Machines SIX (6) each

1. Background:

a. Requiring Organization:

Defense Distribution Depot Oklahoma City OK

b. History:

Machines are required to replace safety deficient machines currently in place and unusable.

c. Purpose of the Statement of Work (SOW):

Purchase new Drill Press Machines, SIX (6) each.

2. Scope of Work to be Performed by Contractor:

The contractor shall provide all necessary labor and material to construct SIX (6) new Drill Press Machines. All equipment furnished shall be new from the manufacturer’s most current production and meet current industry standards, and conform to the best quality of materials and workmanship. Accessories not specifically mentioned herein, but necessary to furnish complete system ready for use, shall also be included and named. All transportation/shipping and installation shall be provided by the contractor.

3. The Drill Press Machines must be equivalent to or greater than the following salient characteristics:

Exterior color – Manufacturers Standard.

Warranty Coverage - Warranty coverage shall be manufacturer’s standard warranty but not less than one year parts and labor.

Operator, Parts and Service Manual(s) and Training – The contractor shall provide with delivery, one (1) complete set of manuals per Drill Press Machine.

a. CLIN 0001 Salient Characteristics For three (3) ea:

· Minimum Swing: 20”

· Spindle Travel: 6.5”

· Reverse Capable: YES

· Drill Speed: 50 – 2000 RPM

· Minimum Table Size: 22” X 19.5”

· Table Adjustment: Raise and Lower Slotted

· Spindle Taper: 3MT

· Chuck Size” .5”

· Emergency Stop: YES

· Spindle Guard Compatible: YES

· Chip Guard Included: NO (Must be capable of accepting Rockford Systems 8009227533 series aftermarket guards)

· Work Light: YES

· Voltage: 220V 1ph

b. CLIN 0002 Salient Characteristics For one (1) ea:

· Minimum Swing: 20”

· Spindle Travel: 6.5”

· Reverse Capable: YES

· Drill Speed: 300-2000 RPM

· Minimum Table Size: 22” X 19.5”

· Table Adjustment: Raise and Lower Slotted

· Spindle Taper: 3MT

· Chuck Size” .5”

· Emergency Stop: NO

· Spindle Guard Compatible: YES

· Chip Guard Included: NO (Must be capable of accepting Rockford Systems 8009227533 series aftermarket guards)

· Work Light: YES

· Voltage: 115V 1ph

c. CLIN 0003 Salient Characteristics For two (2) ea:

· Minimum Swing: 20”

· Spindle Travel: 6.5”

· Reverse Capable: YES

· Drill Speed: 300-2000 RPM

· Table Size: 22” X 19.5”

· Table Adjustment: Raise and Lower Slotted

· Spindle Taper: 3MT

· Chuck Size” .5”

· Emergency Stop: YES

· Spindle Guard Compatible: YES

· Chip Guard Included: NO (Must be capable of accepting Rockford Systems 8009227533 series aftermarket guards)

· Work Light: YES

· Voltage: 230V 3ph

4. Definitions of Terms and Abbreviations:

5. Description of Contractor’s Tasks:

6. Certification and Acceptance:

Final acceptance of the Drill Press Machines will be performed by personnel at the receiving location.

7. Project Management Approach:

N/A

8. Performance and/or Delivery Schedule:

The contractor shall coordinate the delivery with POC listed below.

9. Shipping Location:

QTY: 6ea Defense Logistics Agency Defense Distribution Depot, Oklahoma City OK 3420 D Ave. Building 1 Door 80 Tinker AFB, OK 73145 ATTN: Tambren Ghoram @ 405-822-3822