Attachment 1.pdf
PDF 88 KB Posted
- Attached to
- Plastic Film Sheeting Federal contract opportunity
- Solicitation number
- SPMYM323Q5028
About this file
This document is an item description and specifications attachment for a federal solicitation seeking plastic film sheeting. The Portsmouth Naval Shipyard requires 40' x 100' plastic sheeting that is translucent white in color with "FR" markings applied every 2-6 square feet. The sheeting must be made of reinforced three-ply vinyl construction with a polyester or nylon base fabric and meet specific thickness, weight, tensile strength, tear strength, puncture resistance, and other technical requirements as described. Bids are required to include a 4' x 4' sample and be sent to the Portsmouth Naval Shipyard by the date specified in solicitation number SPMYM323Q5028 for plastic film sheeting issued by the Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Exhibit A.pdf | ||
| SPMYM323Q5028 RFQ.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 03/29/2023 ATTACHMENT PAGE
8305 1GA
C DESCRIPTION/SPECIFICATIONS
C.1 Plastic Sheeting, size 40’ x 100’ C.2 Vendors will need to submit a 4' X 4' sample size with bid for review. Sample does not have to have "FR" markings applied prior to review.
Sample evaluation should be sent to:
Portsmouth Naval Shipyard Bldg 7, Lee Lemieux, Code 975 Kittery, ME 03904
C.3 Reinforced three ply construction consisting of one sheet of vinyl on top, a polyester or nylon base fabric in the center and a sheet of vinyl on the bottom. The vinyl sheets are to be laminated to the polyester/nylon fabric. The polyester/nylon base fabric shall have an 8 x 5 count construction or comparable for material reinforcement. Fabric must be supple, easy to cut.
C.4 Color should be Translucent white. Ensure material exhibits a light transmittance level in which the human form cannot be seen through the plastic ensuring the material will be suitable to use for fabrication of personnel changing rooms, therefore objects behind the vinyl sheeting must be obscured and not clearly visible while also allowing light to penetrate.
C.5 Fire Retardency Manufactured to meet requirements of NFPA 701 Test Method 1 (large scale test) and material shall be marked "FR" Font: Any standard font is acceptable. Font Size: 1"-3" tall letters, and also 1"-3" wide letters.
Color: any color other than white, yellow or magenta. Black would be the preferred color. Placement: Every 2-6 square feet throughout the entire length (40' X100'). Placement of the markings only needs to be applied to one side of the sheeting before packaging.
C.6 Material must be capable of bonding when using an adhesive equivalent to 847 S/G from 3M (used for bonding vinyl plastics, nitrile rubbers, leather and metal to themselves and other materials) C.7 Vinyl shall meet following requirements:
a. Average Total thickness 10-14 mil (0.010" - 0.014"). (Test Method ASTM D-1777 L/R)
b. Nominal weight 7.0 oz/sq.yd (Test Method ASTM D-3776 L/R)
c. Yarns per inch average Warp of 9, Fill of 5 (Test Method ASTM D-3775 L/R)
d. Minimum Tensile strength (average), 1" strip 60 psi longitudinal and 45 psi transverse (Test method ASTM D751 L/R, Procedure B)
e. Minimum Tear Strength Force (average) - 30 lb/f longitudinal and 30 lb/f transverse (Test method ASTM D1004 L/R)
f. Minimum Hydrostatic Resistance 200 psi average (Test method ASTM D751 L/R, Procedure B)
g. Minimum Puncture Resistance (average) 130 psi (Test method ASTM D751 L/R)
h. Low Temperature Bend Test - pass at -30°F (Test method ASTM D2136 L/R)
ITEM NO.
STOCK NUMBER
8305-LL-DM1-0058
SPECIAL CHARACTERISTICS
SIZE:40 FT. X 100 FT.
7 OZ. PER SQ. YD.
**SEE SECTION C. FOR DESCRIPTION/SPECIFICATIONS
ITEM NAME PLASTIC FILM SHEETING, TRANSLUCENT, FROSTED WHITE
SECTION B
SMIC
8L
1/21
SPMYM323Q5028
CONTRACT
PRINTED 03/29/2023 ATTACHMENT PAGE
8305 1GA
i. Linear Dimensional Change (Shrinkage) Test - <3% at 180-200°F (Test method ASTM D1204 L/R) C.8 ITEM 0002: CERTIFICATION/DATA REPORT. CERTIFICATION OF CONFORMANCE, SEE EXHIBIT A, SEQ
A001. TECHNICAL CONTENT IS REQUIRED TO MEET PARAGRAPH C.
D PRESERVATION/PACKAGING/PACKING
D.1 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS). Pack each roll in commercial box. Palletize all boxes. Boxes should not overhang pallets or exceed 54" in height. Each roll should be individually packaged. Each individual package must be marked as followed with: 8305-LL-DM1-0058 8L, Plastic Sheeting, "FR", and Contract Number.
D.2 IN ADDITION TO ABOVE REQUIREMENTS, The vendor shall package material by rolling the material around a cardboard tube, 3" in diameter. DWG Fabric Roll attached.
D.3 Folding requirement-in width direction (40'), fold edges to the center to a finished width of approximately 30", then roll in length (100') direction onto 3" core. Do not fold in 100' direction before rolling onto core.
D.4 Each individual box shall contain a copy of the Certificate of Conformance.
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
H SPECIAL PROVISIONS
K Section
L Section
M Section
SPMYM323Q5028
2/21
File details come from the government source that posted it. Updated .