Attachment 1.pdf

CONTRACT

PRINTED 02/14/2023 ATTACHMENT PAGE

8305 1GA

C DESCRIPTION/SPECIFICATIONS

C.1 Plastic Sheeting, size 40’ x 100’ C.2 Humphreys Cover Sports part number XTVLCL-006 or equal. "Or Equal" vendors will need to submit a 4' X 4' sample size with bid for review.

C.3 Reinforced three ply construction consisting of one sheet of vinyl on top, a polyester or nylon base fabric in the center and a sheet of vinyl on the bottom. The vinyl sheets are to be laminated to the polyester/nylon fabric. The polyester/nylon base fabric shall have an 8 x 5 count construction or comparable for material reinforcement. Fabric must be supple, easy to cut.

C.4 Same color/translucency.

C.5 Fire Retardency Manufactured to meet requirements of NFPA 701 Test Method 1 (large scale test) and material shall be marked "FR", Font: Calibri, Font Size: 110 (1' tall X 1.5" wide), Color: Black Bold style lettering, Placement:

Every 4 sqft throughtout the entire width and length of roll.

C.6 Material must be capable of bonding when using an adhesive equivalent to 847 S/G from 3M (used for bonding vinyl plastics, nitrile rubbers, leather and metal to themselves and other materials) C.7 Vinyl shall meet following requirements:

a. Average thickness .014 (Test Method ASTM D-1777 L/R)

b. Nominal weight 7.0 oz/sq.yd (Test Method ASTM D-3776 L/R)

c. Yarns per inch average Warp of 9, Fill of 5 (Test Method ASTM D-3775 L/R)

d. Minimum Tensile strength (average), 1 strip 60 lbs longitudinal and 45 lbs transverse (Test method ASTM D751 L/R, Procedure B)

e. Minimum Tear Strength (average) - 30 lbs longitudinal and 30 lbs transverse (Test method ASTM D1004 L/R)

f. Minimum Hydrostatic Resistance 200 psi average (Test method ASTM D751 L/R, Procedure B)

g. Minimum Puncture Resistance (average) 130 lbs (Test method ASTM D751 L/R)

h. Low Temperature Bend Test - pass at -30°F (Test method ASTM D2136 L/R)

i. Linear Dimensional Change (Shrinkage) Test - <3% at 180-200°F (Test method ASTM D1204 L/R)

C.8 ITEM 0002: CERTIFICATION/DATA REPORT. CERTIFICATION OF CONFORMANCE, SEE EXHIBIT A, SEQ

A001. TECHNICAL CONTENT IS REQUIRED TO MEET PARAGRAPH C.

D PRESERVATION/PACKAGING/PACKING

D.1 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS). Pack each roll in commercial box. Palletize all boxes. Boxes should not overhang pallets or exceed 54" in height. Each roll should be individually packaged. Each individual package must be marked as followed with: 8305-LL-DM1-0058 8L, Plastic Sheeting, "FR", and Contract Number.

D.2 IN ADDITION TO ABOVE REQUIREMENTS, The vendor shall package material by rolling the material around a cardboard tube, 3" in diameter.

ITEM NO.

STOCK NUMBER

8305-LL-DM1-0058

SPECIAL CHARACTERISTICS

SIZE:40 FT. X 100 FT.

7 OZ. PER SQ. YD.

**SEE SECTION C. FOR DESCRIPTION/SPECIFICATIONS

ITEM NAME PLASTIC FILM SHEETING, TRANSLUCENT, FROSTED WHITE

SECTION B

SMIC

8L

SPMYM3-23-Q-5S01

1 1/2

CONTRACT

PRINTED 02/14/2023 ATTACHMENT PAGE

8305 1GA

D.3 Folding requirement-in width direction (40'), fold edges to the center to a finished width of approximately 30", then roll in length (100') direction onto 3" core. Do not fold in 100' direction before rolling onto core.

D.4 Each individual box shall contain a copy of the Certificate of Conformance.

E INSPECTION ACCEPTANCE

E.1 E1 RESPONSIBILITY FOR INSPECTION

H SPECIAL PROVISIONS

K Section

L Section

M Section

2/21

SPMYM3-23-Q-5S01