Attachment 1-Cut Off Saw Salient Feature Requirements.pdf
PDF 100 KB Posted
- Attached to
- Cut Off Saw Federal contract opportunity
- Solicitation number
- W911KF-24-Q-0009
About this file
This document outlines salient feature requirements for a cut off saw to be procured by the Anniston Army Depot Materials Laboratory. Key requirements for the saw include the ability to cut both manually and automatically, LED lighting for the cutting chamber, a 620mm x 270mm T-slot cutting table, a safety extension box for large parts, an automatic X-table for serial slice cutting, 300mm diameter cut-off wheels capable of cutting materials from 20-65 HRC, a class 2 line laser for alignment, clamping tools for the T-slot table, a table unit with shelving and drawers for storage, extension for the table to widen the workspace, a recirculation/cooling system, automatic cut-off wheel speed selection software, the ability to store cutting methods and view a cut-off wheel database, and on-site installation with training. The related federal contract opportunity is solicitation number W911KF-24-Q-0009 for a cut off saw to be awarded by the Department of the Army Materiel Command Contracting Command Detroit Arsenal.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 3-Request for Technical Literature.pdf | ||
| Attachment 2-Evidence of Authority.pdf | ||
| W911KF-24-Q-0009 Released.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Anniston Army Depot Materials Laboratory
Cut Off Saw
Salient Feature Requirements
Item: Discotom-100 Saw with automatic X- and Y- table OR Equivalent
Requirements:
1. Power Requirements: 3 x 200-240 V, 50/60 Hz, 3-prong grounded plug
2. Cutting Capabilities: must include the ability to cut both manually and automatically.
3. Cutting Chamber Lighting: capability of LED lighting when the chamber is open and closed which will allow the user to have higher visibility of the sample before, during, and after cutting
4. Cutting Table: at least 620mm x 270mm T- slot cutting table which will allow users to cut large samples and avoid the need to cut the sample down to size on a separate machine
5. Safety Extension Box: This will allow users to cut large/long parts that will not fit inside of the cutting chamber
6. Automatic X-Table: this will allow the user to set up samples for automatic cutting such as precise serial slice cutting at user specified locations
7. Cut-Off Wheels: 300mm (12”) diameter cut-off wheels, cut-off wheels shall be capable of cutting a hardness range of 20-65 HRC, cut-off wheel shall be capable of cutting ferrous and non-ferrous material
8. Class 2 Line Laser: enables user the ability of precise alignment of sample without moving the cut-off wheel
9. Clamping Tools: Left and right side quick clamping tools that fit with t-slot table this will allow user to hold samples in place during cutting
10. Table Unit: Allows the saw to sit on top of and will have a shelving unit and drawers used to store tools and cut-off wheels as well as a compartment underneath to house the recirculation/cooling system
11. Extension for Table: this will widen the workspace area and will allow user to use safety extension box to cut large parts that do not fit inside cutting chamber
12. Recirculation/Cooling System: Consists of a tank, tank liners, pump, all necessary tubes and filters, and an additive with cooling properties as well as the ability to protect the machine from corrosion.
13. Software:
a. Automatic cut-off wheel speed selection
b. Cut-off wheel speed adjustment from at least 1500-3000 RPM
c. Automatic cleaning program
d. Store at least 20 cutting methods
e. Pre-loaded cut-off wheel database with recommended rotational speed and wheel thickness
f. Intelligent speed adjustment: this will allow user to select material hardness and then software will automatically adjust to correct speed
14. Equipment must come with the following support items:
a. Safety extension box for parts larger than cutting chamber
b. On-site installation
c. New instrument training and support
d. All owner/operator manuals
e. Any other manual or information that is standard with this machine
15. Warranty: Includes 1 year warranty (extended warranties available with purchase of preventative maintenance plan)
File details come from the government source that posted it. Updated .