Attachment 1 - Bid - Quote Schedule.docx

CLIN

Each assembly kit must include the following items:

1 - Deutz Diesel Tier 4i Engine with EGR Valve, Rated at 63.7 HP @2600 RPM;

24 Volt electrical system, 1 - Deutz LOFA 24 VDC Control Panel with internal gauge illumination wiring harness and no external factory harness, 1 - Power Take-Off (PTO) package, HSG size 4; Clutch size 8S, 1 - 24 VDC Starter, 1 - 24 VDC Alternator, 1 - 24 VDC Shutdown Solenoid, 2 - 24 VDC Glow Plugs, 1 - Engine Harness with integral relay sockets, 1 - Exhaust pipe, 1 - Guard cooler, 1 - Throttle Lever/mounting kit, speed control, 1 - Aluminum Vernier throttle cable, 75 inches long, 1 - Truck valve, lube oil drain, 1 - Adapter, oil drain, 1 - Timing Control Unit, 1 - Relay, Slave, 1 - Wiring Harness for LOFA Panel Gauge Illumination, 2 - Lifting eyes, engine, 1 - Rigid Mount Kit, 1 - Flex Mount Kit, 1 - Parts manual (Deutz) and Operators/Instruction manual (P/N: Deutz), 1- Freight expenses, The vendor will perform the following actions prior to shipment: Perform quality assurance (QA) inspection to verify operation and correct indication on control panel for all engine safety shut down devices, such as low oil pressure and high engine temperature. Ensure all gauges are functioning properly and calibrated; throttle operates freely with no binding, and D.C. charging system checked.

Verify engine preheat system is operational through the preheat controller and indicating properly on the engine control panel. The diesel engine assembly kit/PTO must be assembled with the exception of the LOFA 24 Volt control panel, the Parts manual, and the Operators/Instruction manual, which will be separate, but still packaged with the engine. Loose items will be verified and inventoried for packaging/completeness. All engines (P/N: D2011L04i) are required to have a three (3) year warranty.