Attachment 0004_SPI_AK16693135.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-AI

AB

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 400/N0296 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16693135

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-669-3135 9-18-2018

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 216.3 4.229 43.5 X 12.0 X 14.0

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 20

13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID

MIL-STD-2073-1D 2-C A/R PRESERVATIVE: MIL-PRF-10924G

14. DRYING 3-D A/R CAPS/PLUGS: NAS 847

MIL-STD-2073-1D 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE 24 X 48

15. PACKING

5-F (15) BLOCKING/BRACING: ASTM-D6199

2 2 X 6 X 10-1/2

a. LEVEL A

2 2 X 6 X 9

MIL-STD-129 & NOTE I

K

2 2 X 6 X 4-1/2

2 1 X 6 X 8-1/2

3 2 X 4 X 10-1/2

b. LEVEL B

4 1 X 4 X 9

NOT APPLICABLE 6-G (7) BLOCKING/BRACING: A-A55057, TY A

2 5-1/2 X 10-1/2 X ¾” THICKNESS

2 5-1/2 X 4-1/2 X ¾” THICKNESS

16. MARKING 2 9 X 14 X ¾” THICKNESS

MIL-STD-129 1 5-1/2 X 4-1/2 X 3/8” THICKNESS

7-H 1 CONTAINER: ASTM-D6880, CL 2, ST 1,

SIZE: 40-1/2 X 10-1/2 X 9

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. FILL CYLINDER WITH OPERATIONAL FLUID.

C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES AND TO GREASE (ZERK)

FITINGS.

D. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.

E. WRAP CYLINDER IN PAPER, SECURE WITH TAPE.

F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO

ASTM-F1667, SEE PAGES 2 – 3.

G. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO

ASTM-F1667, SEE PAGES 2 – 3.

H. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION ASTM-D6880.

I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -AI OMB No. 0704-0188 AB

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/N0296 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16693135

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-669-3135 9-18-2018

17. NOTES/DRAWING

1 X 4 X 9

QTY 2

9 X 14 X ¾ PLY

QTY 1

9 X 14 X ¾ PLY

QTY 1

5-1/2 X 10-1/2 X ¾ PLY

QTY 1

5-1/2 X 4-1/2

X 3/8 PLY

QTY 1

2 X 6 X 9

QTY 1

2 X 6 X 10-1/2

QTY 1

2 X 6 X 9

QTY 1 1 X 6 X 8-1/2

QTY 1

2 X 6 X 4-1/2

QTY 2

1 X 4 X 9

QTY 2

2 X 4 X 10-1/2

QTY 2

5-1/2 X 10-1/2 X ¾ PLY

QTY 1

2 X 6 X 10-1/2

QTY 1

5-1/2 X 4-1/2

X ¾ PLY

QTY 2

1 X 6 X 8-1/2

QTY 1

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -AI OMB No. 0704-0188 AB

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

400/N0296 (0JKF0) CYLINDER, HYDRAULIC, LINEAR 19207 AK16693135

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-669-3135 9-18-2018

2 X 4 X 10-1/2

QTY 1

TOP HOLD DOWN:

SECURE ONE 2 X 4 X 10-1/2

IN THE CENTER OF THE

TOP PANEL AS SHOWN

BELOW

FOR CLARITY,

CYLINDER IS SHOWN

WITHOUT PAPER WRAP