Att 1 Salient Characteristics.pdf

Bureau of Reclamation RFQ No. 140R3020Q0085 Yuma Area Office

Specifications Plasma Cutting Table System

PART 1 GENERAL

1.01 DESCRIPTION

The Bureau of Reclamation, Interior Region 8: Lower Colorado Basin, has a requirement to purchase one (1) CNC plasma cutting table system.

1.02 DELIVERABLES

The deliverables for the plasma cutting table system which meets or exceeds characteristics in Part 2.

PART 2 PRODUCTS

2.01 CNC Plasma Cutting Table System Characteristics

Contractor must provide one (1) fully functional and safe CNC plasma cutting table system.

Examples of acceptable products are: Praxair brand, Model No. PRS100, Lincoln Electric brand, Model No. Torchmate 5100, AKS brand, Model No. Tru-Kut, or approved equal.

1. One (1) 5’X10’ CNC plasma cutting table system;

2. Capable of operating on 480 Volts AC, 3 phase supply;

3. Machine must have an effective cut dimension of 5 foot wide by 10 foot long;

4. Capable of cutting mild steel up to 1.25” thick w/plasma;

5. Capable of cutting mild steel up to 2.0” thick w/Oxy-fuel;

6. Break away torch station mechanisms for both plasma and oxy torches;

7. Oxy-Fuel torch station w/lifter;

8. Standard CNC operating system;

9. Integrated standard static water table to assist in collecting debris, and;

10. Safety system, supporting emergency stop switches.

PART 3 CONTRACTOR SERVICES

3.01 DELIVERY

A. Delivery shall be made to the following address:

Bureau of Reclamation Yuma Area Office Attn: Whse/Receiving 7301 Calle Agua Salada Yuma, AZ 85364

B. Delivery shall be made within 120 days of award. The contractor must coordinate the delivery with the Bureau of Reclamation at least three (3) weeks in advance.

C. The contractor must protect all parts/equipment from corrosion, deformation, dents, dings, scratches, ruptures, breaks, punctures, abrasions, cuts, and other types of damage during storage, handling, transport, and delivery.

3.02 COMMISSIONING & TRAINING

The contractor must provide machine commissioning, and both plasma and oxy operations training to Yuma Area Office personnel of approximately ten (10) employees. Social distancing will be practiced along with employees will wear masks. Virtual training will also be considered.