Atch 01 Zeiss Multisensor Measuring Machine Specification.pdf

Specifications for

Small Multisensor Coordinate Measurement Machine (CMM) at

Arnold Air Force Base, TN

Arnold Engineering Development Complex (AEDC)

Contractor shall provide all materials, labor, equipment and transportation necessary to deliver the following:

Quantity: One (1)

Manufacturer/Brand Name: Carl Zeiss AG (Zeiss) Industrial Metrology LLC

Model / Description: Zeiss O-Inspect 3/2/2 DotScan Coordinate Measuring Machine (CMM)

****Refurbished or remanufactured machine or parts are not authorized for this requirement****

Precision Inspection Machine Specifications:

Machine General o Measuring Volume X= 300 mm (11.81”), Y=200mm (7.87”), Z=200mm (7.87”) o Multi-sensor (Optical & Tactile Passive) Measurement Technology o Pre-Wired For Dot-Scan Optical Sensor o PC-based Integrated Scanning Control (ISC) o Integrated Passive Vibration Damping

Optical Measuring Capabilities o CMOS Camera o Zeiss Discovery Zoom-lens (12x Magnification) o Double Tele-centric System o Outer Ring Light, 8 Sectors with LED’s (Red/Blue) o Inner Ring Light with LED’s (Red/Blue) o Coaxial Incident Light for Zoom Lens (Red/Blue) o Integrated Transmission Back-Light System

Sensors and Accessories o O-Inspect Mutisensor Rack F. O-Inspect XXT

Adapter Plate for VAST XXT TL3 with ID-Chip (ZSH-28-B-0-M3)

9 Piece Stylus Kit 626103-9021-000 for small workpiece and supports the

VAST XXT Sensor

Cable USB-2.0 A-4pin/B-4pin 1.8m

Compatible Data Analysis Stand Alone Workstation o HP Z4 V2 Performance Computer Workstation Includes:

Windows 10 IOT Enterprise 64-bit Operating System Intel Xeon W-2123 3.6 GHz 4 Core Microprocessor

64GB RAM (4X16GB) DDR4 2666 ECC REG2 Memory

NVIDIA Quadro P2200 5GB 1st Graphics Card GFX

256GB SATA 1st Solid State Drive, 4GB 7200 RPM SATA 2nd Hard Disk

Drive

English keyboard

Compatible Mouse o HP Z27n G2 27" Flat Screen Monitor Includes Maximum resolution: 2560 x 1440 (Full HD) Aspect ratio:9:16 (widescreen)

Dimensions w/stand (w x d x h): 61.3 cm x 21.4 cm x 50.9 cm

Input connectors: 1 x VGA, 1 x HDMI 1.4, DisplayPort 1.2; (HDCP support on HDMI and DisplayPort)

Display swivels for portrait or landscape viewing o All connection cables

Software o CALYPSO Basic CNC, CALYPSO Curve:

CALYPSO Basis CNC CALYPSO Curve

CALYPSO Basic CNC Dongle License

CALYPSO Curve, BasLic, Dongle

CALYPSO step/out, BasLic, Dongle

CALYPSO CNC Software Maintenance & Phone Support for one year

CALYPSO Software Dongle License - STEP

CALYPSO STEP Software Maintenance & Phone Support for one year

PiWeb Reporting Plus Software, with Dongle License & Phone Support for one year

Installation Service, Manuals Training and Verification o After delivery the Contractor shall be onsite to assist AEDC personnel to install, setup and test run the machine in accordance with functional tests for accuracy required by ISO Standards.

o Contractor shall provide the following documentation during the installation:

Installation Guide and Acceptance documents

Maintenance Manual, Electrical Manual, and Schematics: One hard copy with DVD disks or downloadable from Internet o Training Requirements

Warranty

Initial hands on training including machine features, operation and user maintenance requirements shall be provided beginning at machine startup following machine installation and shall be included in machine cost.

One Year of Real-Time Telephone Support on Hardware and all software packages

CALYPSO Basic Training 4 days at ZEISS for 1 Persons

CALYPSO CURVE Training 3 days at ZEISS for 1 Person o This machine shall be warranted against any defects in material, parts, and workmanship for 24 months after the date of installation. The control, servomotors and main spindle motor are warranted against defects in material, parts, and workmanship for 24 months after the date of installation.

Maintenance, Parts and Service o The Contractor shall have the capability to service the equipment (labor and parts) beyond the warranty period. The Contractor or representative shall be capable of responding to a repair service call on-site within 36 hours and repair parts delivery within 48 hours after placement of order.

Packaging/Delivery o Provide all preservation, packaging, and packing to ensure safe delivery of the machine and related components to AEDC (FOB Arnold Air Force Base, TN 37389). Deliver Machine to AEDC for off-loading by AEDC personnel.

o Deliver no later than (NLT) 6 weeks after receipt of order (WARO).

Installation o Installation will be at the Arnold Air Force Base, TN; Arnold Engineering Development Complex’s Model Shop, Building 451, Von Karman Road, Arnold AFB, TN 37389. This installation assistance from the Contractor shall be included in machine cost.