AM12984713 - TELSCOPE PANORAMIC M137A2 Attachment 3.pdf
PDF 30 KB Posted
- Attached to
- SPI Containers for DDAA Federal contract opportunity
- Solicitation number
- SP330023Q0234
- Issued by
- Defense Logistics Agency Distribution
About this file
This document provides packaging instructions for a Panoramic Telescope M137A2. It specifies that the telescope lens should be covered with lens paper and tape, placed in a barrier bag, cushioned, and inserted into an fiberboard container which is then heat sealed. Packaging shall follow Mil-Std-2073-1 and be cleaned, dried, and pass applicable inspections. Related solicitation SP330023Q0234 from the Defense Logistics Agency Distribution seeks packaging containers meeting these instructions for the telescope.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tab 11 - SP3300-23-Q-0234.pdf | ||
| AK12885237 - 180 AMP RECTIFIER Attachment 4.pdf | ||
| AM9376192 - ELECTRONICS UNIT ASSEMBLY Attachment 5.pdf | ||
| AK13890648 - VALVE REGULATING Attachment 2.pdf | ||
| AMP12273251 Attachment 1.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.
12984713 TELSCOPE, PANORAMIC M137A2 19200 AM12984713
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-483-6103 150617
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1/EA - 19.5 2.7 18.0 X 16.0 X 13.0
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 10 1 AR LENS PAPER, A-A-50177, TYPE-II SEE NOTE (A).
13. CLEANING 2 AR TAPE, ASTM D6123/D6123M. SEE NOTE(A)
* 3 1 BARRIER BAG, SEE DWG 13027484
14. DRYING 4 2 CUSHIONING, MIL-PRF-26514, TY-1, GR-C, CL-2 (B)
* 5 1 CONTAINER, ASTM D5118/D5118M, ST-RSC, GR-W5C
(C)
15. PACKING 6 1 CLOSURE, ASTM D1974, SEALING METHOD B
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWINGS
GENERAL REQUIREMENTS
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* ITEMS SHALL BE CLEANED AND DRIED BY ANY PROCESS OR PROCESSES THAT ARE NOT INJURIOUS TO THE ITEM. ALL ITEMS SHALL PASS THE APPLICABLE CLEANING AND DRYING INSPECTION REQUIREMENTS OF MIL-STD-2073-1.
(A) COVER OPTICAL SURFACES WITH A DOUBLE THICKNESS OF LENS TISSUE AND SECURE WITH TAPE.
(B) PLACE TELESCOPE IN BAG, HEAT SEAL AND PLACE BETWEEN TOP AND BOTTOM CUSHIONS.
(C) INSERT PACKAGE INTO FIBERBOARD BOX AND SEAL ACCORDING TO ASTM D1974.
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
WSC: G9 ITEM SIZE: 13.0 x 11.5 x 8.0 ITEM WEIGHT: 17.5 APPROVED: M.J.BARNANSKY
DD Form 2169, JUN 1997 Previous editions are obsolete Page 1 of 2 Pages
D/H15A3011
SPECIAL PACKAGING INSTRUCTION (Continuation sheet) Form Approved OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.
12984713 TELESCOPE, PANORAMIC M137A2 19200 AM 12984713
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
1240-01-483-6103
17. NOTES / DRAWINGS CONTINUED
DD Form 2169C, SEP 96 Previous editions are obsolete Page 2 of 2 Pages
D/H15A3011150617
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
File details come from the government source that posted it. Updated .