AK16236680.pdf
PDF 225 KB Posted
- Attached to
- Cylinder Assembly, Linear Actuating Federal contract opportunity
- Solicitation number
- SPRDL1-25-Q-0012
About this file
This is a Special Packaging Instruction (DD Form 2169) for a Cylinder Assembly Sideshifter (Part No. 101GR0012, NSN 3040-01-623-6680) dated February 5, 2013. The document provides detailed military preservation and packaging requirements for the cylinder assembly, including cleaning procedures (MIL-STD-2073-1D), drying specifications, and Level A packing requirements.
The packaging instructions specify that the cylinder must be fully retracted before packaging, with preservative applied to unpainted/unplated metallic surfaces and all openings sealed with appropriate caps/plugs. The unit pack requirements include wrapping the item with MIL-PRF-121 Type II paper (36x58 size), using specific blocking and bracing materials (ASTM-D6199), and packaging in a modified ASTM-D6251 Type III container measuring 48-1/4" x 8-3/4" x 7". The document includes detailed diagrams showing blocking locations and proper orientation of the cylinder in the container, with specific lumber sizes and quantities listed for seven different blocking components (labeled A through G).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL125Q0012.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
101GR0012 (0LVS7) CYLINDER ASSEMBLY, SIDESHIFTER 19207 AK16236680
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-623-6680 2/5/2013 -
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 102.5 2.844 51.3 X 10.3 X 9.3
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 20
13. CLEANING 1-B A/R ITEM PREPARATION
MIL-STD-2073-1D 2-C A/R PRESERVATIVE: MIL-PRF-10924
14. DRYING 3-D A/R CAPS/PLUGS: NAS-847
MIL-STD-2073-1D 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE: 36 X 58
15. PACKING
5-F 10 BLOCKING/BRACING: ASTM-D6199, CL 3
6-G 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST I, MODIFIED
a. LEVEL A SIZE: 48-1/4 X 8-3/4 X 7
MIL-STD-2073-1D & NOTE H
b. LEVEL B
NONE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. ENSURE CYLINDER ASSEMBLY IS FULLY RETRACTED PRIOR TO PACKAGING.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
D. SEAL ALL OPENINGS TO ITEMS INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH TAPE ASTM-D6123.
F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO
ASTM-F1667, SEE BELOW AND PAGE 2 FOR SIZES AND ORIENTATION.
G. CONTAINER MODIFIED TO INCLUDE 2 X 4 SKIDS PLACED IN ACCORDANCE WITH ASTM D6251. CLOSE
CONTAINER IN ACCORDANCE WITH ASTM D6251.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
ITEM SIZE QTY REFERENCE
A 4 X 4 X 9-1/2 1 ASTM-D6199, CL 3
B 4 X 4 X 29 1 ASTM-D6199, CL 3
C 2 X 4 X 7-1/2 1 ASTM-D6199, CL 3
D 2 X 4 X 26-3/4 1 ASTM-D6199, CL 3
E 2 X 4 X 8-3/4 2 ASTM-D6199, CL 3
F 1 X 4 X 8-3/4 2 ASTM-D6199, CL 3
G 8-3/4 X 3-1/2 X 3/8” THICKNESS PLYWOOD 1 ASTM-D6199, CL 3
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
101GR0012 (0LVS7) CYLINDER ASSEMBLY, 19207 AK16236680
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-01-623-6680 2/5/2013 -
17. NOTES/DRAWING
BLOCKING LOCATIONS
ORIENTATION OF CYLINDER IN CONTAINER
NOTE: WRAP REMOVED FOR CLARITY
A
F
EB
G
F
E
D
C
File details come from the government source that posted it. Updated .