AK13445884_c.pdf
PDF 191 KB Posted
- Attached to
- Steering Gear Federal contract opportunity
- Solicitation number
- SPRDL1-23-R-0123
About this file
This document provides special packaging instructions for a steering gear. It specifies that the part must be preserved, packed, and unit packed according to MIL-STD-2073-1E. Preservative is to be applied through grease fittings and to flush internally and drain excess. Openings must be sealed with metal plugs and bare metal surfaces coated with preservative. The item requires single wrap of MIL-PRF-121 type II and blocking/bracing per ASTM-D6199. The shipping container is to be constructed of one-inch lumber with beveled skids and secured with screws. Markings shall identify the container as reusable per MIL-STD-129. The related solicitation from the Defense Logistics Agency Land and Maritime seeks offers for steering gears to meet the requirements specified in the packaging instructions.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL123R0123-0002.pdf | ||
| SPRDL123R0123-0001.pdf | ||
| SPRDL123R0123.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
2530-01-344-5884 05/16/23
AK13445884
C
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
-DL
WEATHERIS
SPECIAL PACKAGING INSTRUCTION
M110SAB2 (78222) STEERING GEAR 19207
A. QUALITY ASSURANCE PROVISIONS: INSPECT THE PRESERVATION, PACKING, AND UNIT PACK IN ACCORDANCE
WITH MIL-STD-2073-1E.
B. PRESERVATIVE: APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS.
C. PRESERVATIVE: FLUSH OR SLUSH (AS APPLICABLE) INTERNALLY AND THOROUGHLY DRAIN EXCESS.
D. PLUGS: SEAL ALL OPENINGS WITH METAL PLUGS OF THE APPROPRIATE SIZE.
E. PRESERVATIVE: APPLY TO BARE, UNPLATED, UNPAINTED METALLIC SURFACES.
F. WRAP: SINGLE WRAP REQUIRED. COMPUTE SIZE IN ACCORDANCE WITH MIL-STD-2073-1E. ENSURE PART DOES
NOT COME INTO CONTACT WITH CONTAINER OR BLOCKING/BRACING. SECURE WRAP WITH TAPE.
G. BLOCKING/BRACING: SEE PAGE 2.
H. CONTAINER IS TO BE CONSTRUCTED OF ALL 1-INCH NOMINAL LUMBER AND MODIFIED TO INCLUDE BEVELED
SKIDS. TOP OF CONTAINER SHALL BE SECURED TO SIDES AND ENDS WITH WOOD SCREWS.
I. PACKING: THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
J. MARKING: THE UNIT CONTAINER SHALL ALSO BE MARKED ON THE TOP AND ONE SIDE IAW MIL-STD-129 SPECIAL
MARKINGS,"REUSABLE CONTAINER AND CUSHIONING. DO NOT DESTROY."
1 EACH NONE
MIL-STD-2073-1E, METHOD 20
MIL-STD-2073-1E
MIL-STD-2073-1E
10. UNIT PACK CU. (CU. FT.)
2.021
11. UNIT PACK SIZE (IN)
12. MILITARY PRESERVATION
17. NOTES / DRAWING
15. PACKING
14. DRYING
13. CLEANING
7. QUP 8. ICQ 9. UNIT PACK WT. (LB)
141.0
20.
DESCRIPTION
18.
STEPS
19.
REQ'D
MIL-STD-2073-1E AND NOTE I
NOT APPLICABLE
MIL-STD-129 AND NOTE J
19.9 X 12.1 X 14.5
b. LEVEL B
16. MARKING
a. LEVEL A
1B 2C 3D 4E 5F 6G 7H
A/R A/R
A/R A/R
PRESERVATIVE: MIL-PRF-10924
PRESERVATIVE: MIL-PRF-21260
PLUGS: NAS847
PRESERVATIVE: MIL-PRF-16173, GR 4
WRAP: MIL-PRF-121, TY II
BLOCKING AND BRACING: ASTM-D6199
CONTAINER: ASTM-D6880, CL 2, ST 4 (MOD)
SIZE: 16-7/8 X 10-5/8 X 10-1/2
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
FORM APPROVED
OMB No. 0704-0188
2530-01-344-5884 05/16/23
AK13445884
C
4. NATIONAL STOCK NO.
2. CAGE 3. SPI NO.
6. REVISION5. DATE
-DL
WEATHERIS
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE
M110SAB2 (78222) STEERING GEAR 19207
DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
File details come from the government source that posted it. Updated .