AK12880497 REV H.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-VS

JS

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED

FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 12268305 (19207) ALTERNATOR, 180 AMP 19207 AK12880497

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2920-01-288-0497 June 28, 2018 H

7. QUP 8. ICQ 9. UNIT PACK WT (LB.)

(LB)

10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 47.5 0.970 12.3. X 9.8 X 13.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42

13. CLEANING 1-B PRESERVATIVE: MIL-PRF-32033

MIL-STD-2073-1 2 CUSHIONING: SEE PAGES 2 AND 3

14. DRYING 3 1 CONTAINER: ASTM D5118, ST RSC, TY CF, CR 350

MIL-STD-2073-1 VAR SW, SIZE: 11-1/2 X 9 X 12-5/8

15. PACKING

4 CLOSURE: ASTM D1974, METHOD 2B6

5 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 23 X 26

a. LEVEL A

6 1 CONTAINER: ASTM D5118, ST RSC, TY CF, GR V3c

MIL-STD-2073-1 AND NOTE C SIZE: 12 X 9-1/2 X 13-3/8

b. LEVEL B

7 CLOSURE: ASTM D1974, METHOD 2B6

MIL-STD—2073-1 AND NOTE C

16. MARKING

MIL-STD-129 AND NOTE D

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. APPLY PRESERVATIVE TO DRIVE SHAFT. WRAP PRESERVED SHAFT WITH MIL-PRF-121, TY II.

C. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING CLEATED-PLYWOOD BOXES, OVERSEAS TYPE, CONFORMING TO ASTM D6251; OR NAILED WOODEN BOXES CONFORMING TO ASTM D6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-

RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM D5168 OR PALLET BASE CONTAINERS, TYPE III, CONFORMING TO MIL-B-43666. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

D. THE UNIT CONTAINER SHALL ALSO BE MARKED ON THE TOP AND ONE SIDE IAW MIL-STD-129 SPECIAL MARKING, “REUSABLE CONTAINER AND CUSHIONING, DO NOT DESTROY. OPEN ALONG TAPE SEAMS, AS NEEDED, USING SHALLOW BLADED KNIFE.”

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE

ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12268305 (19207) ALTERNATOR, 180 AMP 19207 AK12880497

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2920-01-288-0497 June 28, 2018 H

17. NOTES/DRAWINGS CONTINUED

17.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE

ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12268305 (19207) ALTERNATOR, 180 AMP 19207 AK12880497

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2920-01-288-0497 June 28, 2018 H

17. NOTES/DRAWINGS CONTINUED

18.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages