AK 110s HULL CLEANING AND INSPECTION SOW.pdf
PDF 661 KB Posted
- Attached to
- UW Hull Cleaning & Inspect Federal contract opportunity
- Solicitation number
- 52000QR250002179
About this file
This is a Statement of Work (SOW) for underwater hull cleaning and inspection services for three U.S. Coast Guard vessels: CGC Mustang, CGC Naushon, and CGC Liberty. The work requires trained personnel to verify danger tags, conduct pre-clean inspections with video documentation, clean the hull and underwater components including shafts, props, rudders, fins, and sea chest cavities (up to 18 inches from sea chest), and perform post-clean inspections with video documentation. The contractor must submit a final report with completed forms and inspection videos via email, ensuring media is viewable on the CG network.
The work is to be performed at USCG Base Ketchikan in Alaska on May 5, 2025. The SOW references several Coast Guard manuals and technical specifications that must be followed, including Equipment Tag-Out Procedure COMDTINST M9077.1, Diving Program Manual COMDTINST M3150.1, and U.S. Coast Guard TS 081 for Waterborne Underwater Hull Cleaning. The contractor is responsible for assessing and renewing sea chest hardware as needed, with hardware to be supplied by the contractor. Mr. Jason Devin serves as the Contracting Officer Technical Representative (COR), while MKC Steven Newsom is the designated point of contact for scheduling and local logistics.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work (SOW) For Underwater Body Cleaning and Inspection of CGC MUSTANG, CGC NAUSHON & CGC LIBERTY
1. Background and Current Observed Issues
CGC Mustang, CGC Naushon & CGC Liberty is requesting SERVICES for conducting underwater hull cleaning and inspection.
2. REFERENCES
Equipment Tag-Out Procedure, COMDTINST M9077.1 (Series) Diving Program Manual, COMDTINST M3150.1 (Series) U.S. Coast Guard TS 081, Waterborne Underwater Hull Cleaning U.S. Coast Guard MPC B26000.D (Rev 05/15/18)
3. REQUIREMENTS
Entity will perform the following work with trained personnel IAW above references:
Verify danger tags and equipment status with cutter POC.
Conduct pre-clean inspection per MPC B26000.D, to include video of pre-clean inspection.
Clean hull, shafts, props, rudders, fins and any other underwater appendages. Sea chest grates to be removed and sea chest cavity with associated sea water suction piping to be cleaned (up to 18 inches from the sea chest). Hardware for sea chests should be assessed and renewed at discretion of CG (hardware supplied by entity completing work). Submit condition found and request for additional funds if necessary.
Conduct post clean inspection, including video.
Submit final report, all completed forms from MPC B26000.D and pre/post inspection videos via email to cutter POC.
o Note: Media must be viewable and able to be downloaded on the CG network, CD’s and thumb drive/removable media is not acceptable. Review videos and forms with cutter POC prior to departure of dive team.
4. PERIOD OF PERFORMANCE
The period of the performance is requested to be 05 MAY 2025.
5. PLACE OF PERFORMANCE
The primary place of performance shall be at Base Ketchikan moorings located at below address:
USCG Base Ketchikan 1300 Stedman St Ketchikan, AK 99901
Contracting Officer Technical Representative (COR):
Mr. Jason Devin, APM Office: (757) 628-4623 Cell: (651) 600-0525 Teams: (206) 815-1382 Email: Jason.m.devin2@uscg.mil
Cutter Point of Contact for scheduling and local logistics:
MKC Steven Newsom, EPO, CGC Liberty Cell: (706) 499-9629 Email: Steven.k.newsom@uscg.mil
File details come from the government source that posted it. Updated .