AG-84N8-S-09-0022 Docks.doc

RFQ Put your number here

Docks (High fill) for Flaming Gorge RD – Ashley NF

RFQ AG-84N8-S-09-0022

COVER SHEET

Commercial Item Requisition

**ATTENTION ALL BIDDERS**

In order to be awarded a Federal Government Contract, you must register annually in Central Contractor Registration.

See http://www.ccr.gov/handbook.cfm for a template of information necessary for registration. (Please notify us if there are any changes ie; banking information, address changes, etc) As of January 1, 2005 every contractor is required to complete the annual Representations and Certifications electronically. See http://orca.bpn.gov for a template of information necessary to comply with this mandate.

RFQ# AG-84N8-S-09-0022

Docks (high fill) for Flaming Gorge RD

ON THE

ASHELY NATIONAL FOREST

IN UTAH

Return pages 1 thru 3 and 9 thru 20 to the address in block 9. Reference RFQ number on the envelope. Facsimile is also accepted. (801) 975-3483

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

7. FOR SOLICITATION

INFORMATION CALL:

FOB DESTINATION

UNLESS BLOCK IS

MARKED

FORMCHECKBOX

SEE SCHEDULE

12. DISCOUNT TERMS

USDA-FOREST SERVICE –R4

Utah Acquisition Support Center

2222 West 2300 South

Salt Lake City, UT 84119-2083

( ) UNRESTRICTED

(X ) SET AIDE: 100 % FOR

( X ) SMALL BUSINESS

( ) SMALL DISAV. BUSINESS

13a. THIS CONTRACT IS A RATED ORDER UNDER DPAS (15 CFR 700)

RFQ FORMCHECKBOX

IFB FORMCHECKBOX

RFP

2222 West 2300 South

Salt Lake City, UT. 84119

FORMCHECKBOX

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK IS CHECKED FORMCHECKBOX

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Attach Additional Sheets as Necessary)

FORMCHECKBOX

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA FORMCHECKBOX

ARE FORMCHECKBOX

ARE NOT ATTACHED

FORMCHECKBOX

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCES FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA FORMCHECKBOX

ARE FORMCHECKBOX

ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN COPIES

FORMCHECKBOX

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REFERENCE ___________________ OFFER

FORMCHECKBOX

DATED ______________________. YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

32a. QUANTITY IN COLUMN 21 HAS BEEN

FORMCHECKBOX

RECEIVED FORMCHECKBOX

INSPECTED FORMCHECKBOX

ACCEPTED, AND CONFORMS TO

THE CONTRACT, EXCEPT AS NOTED

FORMCHECKBOX

PARTIAL FORMCHECKBOX

FINAL

COMPLETE FORMCHECKBOX

PARTIAL FORMCHECKBOX

FINAL

42a. RECEIVED BY (Print)

SCHEDULE OF ITEMS

Item Unit

No. Description Qty Unit Price Amount

01 Double T dock for Hideout CG 1 EA $______ $_______

02 Straight single docks for Hideout CG 10 EA $_______ $________

03 Single T docks for King Fisher CG 2 EA $_______ $________

04 Floating Campsite docks

EA $_______ $________

05 Single Camping Docks 2 EA $ _______ $________

GRAND TOTAL XXX $________

NOTE: Pricing needs to include the delivery cost. Please note various delivery dates and locations in the Specification Details of this solicitation

DUNS#___________

Contractor must be registered in the Central Contracting Registration (CCR).

Contractor to deliver to:

Ashley National Forest Ashley National Forest

Flaming Gorge Ranger District or Flaming Gorge Ranger District

Attn: Al Pulhum Attn: Nell Highfill

Phone (435) 781-5269 Phone (435) 781-5246 (OMB Clearance No. 9000-0142)

EXPERIENCE

Offeror's shall furnish the following information as it pertains to this RFQ.

A.

Furnish the following experience information:

1.

How many years experience as a prime Contractor do you have?__________ 2.

List your contract experience over the past 3 years with similar projects.

Contract

Amount

Completed References: name, address, phone no.

& person to contact for project info.

Continuation of SF1449 Block 27: The full text of a clause or provision may be accessed electronically at www.arnet.gov/far/

CONTRACT CLAUSES

FAR 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Items (AUG 2007)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(2) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995)(41 U.S.C. 253g and 10 U.S.C. 2402).

___ (2) 52.219-3, Notice of Total HUBZone Set-Aside (Jan 1999)(15 U.S.C. 657a).

___ (3) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jul 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (4) [Reserved]

_X_ (5) (i) 52.219-6, Notice of Total Small Business Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-6.

___ (iii) Alternate II (Mar 2004) of 52.219-6.

___ (6) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003)(15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (7) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)).

___ (8) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2007)(15 U.S.C. 637 (d)(4).)

___ (ii) Alternate I (Oct 2001) of 52.219-9.

___ (iii) Alternate II (Oct 2001) of 52.219-9.

___ (9) 52.219-14, Limitations on Subcontracting (Dec 1996)(15 U.S.C. 637(a)(14)).

___ (10) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999)(15 U.S.C. 637(d)(4)(F)(i)).

___ (11) (i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Sep 2005)(10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).

___ (ii) Alternate I (June 2003) of 52.219-23.

___ (12) 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting (Oct 1999)(Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

___ (13) 52.219-26, Small Disadvantaged Business Participation Program—Incentive Subcontracting (Oct 2000)(Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

___ (14) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f).

_X_ (15) 52.219-28, Post Award Small Business Program Re-representation (June 2007) (15 U.S.C. 632(a)(2)).

_X_ (16) 52.222-3, Convict Labor (June 2003)(E.O. 11755).

_X_ (17) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Aug 2007) (E.O. 13126).

_X_ (18) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

_X_ (19) 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246).

___ (20) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006)(38 U.S.C. 4212).

_X_ (21) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998)(29 U.S.C. 793).

___ (22) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006)(38 U.S.C. 4212).

___ (23) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (Dec 2004) (E.O. 13201).

_X_ (24) (i) 52.222-50, Combating Trafficking in Persons (Aug 2007) (Applies to all contracts).

___ (ii) Alternate I (Aug 2007) of 52.222-50.

___ (25) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Products (Aug 2000)(42 U.S.C. 6962(c)(3)(A)(ii)).

___ (ii) Alternate I (Aug 2000) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)).

_X_ (26) 52.225-1, Buy American Act--Supplies (June 2003)(41 U.S.C. 10a-10d).

___ (27) (i) 52.225-3, Buy American Act –Free Trade Agreements – Israeli Trade Act (Aug 2007) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, Pub. L. 108-77, 108-78, 108-286, and 109-169).

___ (ii) Alternate I (Jan 2004) of 52.225-3.

___ (iii) Alternate II (Jan 2004) of 52.225-3.

___ (28) 52.225-5, Trade Agreements (Aug 2007) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___ (29) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2006) (E.o.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (30) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Aug 2006) (42 U.S.C. 5150).

___ (31) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Aug 2006) (42 U.S.C. 5150).

___ (32) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

_X_ (33) 52.232.30, Installment Payments for Commercial Items (Oct 1995)(41 U.S.C. 255(f), 10 U.S.C. 2307(f)).

_X_ (34) 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration (Oct. 2003)(31 U.S.C. 3332).

___ (35) 52.232-34, Payment by Electronic Funds Transfer—Other Than Central Contractor Registration (May 1999)(31 U.S.C. 3332).

___ (36) 52.232-36, Payment by Third Party (May 1999)(31 U.S.C. 3332).

___ (37) 52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a).

___ (38) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006)(46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

_X_ (1) 52.222-41, Service Contract Act of 1965, as Amended (Jul 2005)(41 U.S.C. 351, et seq.).

___ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989)(29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

___ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act -- Price Adjustment (Multiple Year and Option Contracts) (Nov 2006)(29 U.S.C.206 and 41 U.S.C. 351, et seq.).

___ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act -- Price Adjustment (Feb 2002)(29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

___ (5) 52.237-11, Accepting and Dispensing of $1 Coin (Aug 2007)(31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (i) through (vii) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause--

(i) 52.219-8, Utilization of Small Business Concerns (May 2004)(15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ii) 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246).

(iii) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sep 2006)(38 U.S.C. 4212).

(iv) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998)(29 U.S.C. 793).

(v) 52.222-39, Notification of Employee rights Concerning Payment of Union Dues or Fees (Dec 2004) (E.O. 13201).

(vi) 52.222-41, Service Contract Act of 1965, as Amended (Jul 2005), flow down required for all subcontracts subject to the Service Contract Act of 1965 (41 U.S.C. 351, et seq.)

(vii) 52.222-50, Combating Trafficking in Persons (Aug 2007) (22 U.S.C. 7104(g)). Flow down required in accordance with paragraph (f) of FAR clause 52.222-50.

(viii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64,

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

SOLICITATION PROVISIONS

FAR 52.212-2 Evaluation – Commercial Items (JAN 1999)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used in descending order of importance for evaluation purposes:

Technical capability and quality of the item offered to meet the Governments specifications.

Delivery Time ___________

Price (which includes shipping)

Low maintenance – product with least amount of maintenance required

Past performance – supplied docks for public use in harsh climates (winter and wind)

Product Longevity – how long do docks last before needing replacement, contractor to provide examples.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 Offeror Representations and Certifications -- Commercial Items (Sep 2007)

An offeror shall complete only paragraph (k) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (j) of this provision.

(a) Definitions. As used in this provision--

“Emerging small business” means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

(b) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.)

(1) All offerors must submit the information required in paragraphs (b)(3) through (b)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS).

(2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror’s relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror’s TIN.]

(3) Taxpayer Identification Number (TIN).

( TIN:_____________________.

( TIN has been applied for.

( TIN is not required because:

(Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;

( Offeror is an agency or instrumentality of a foreign government;

( Offeror is an agency or instrumentality of the Federal Government;

(4) Type of organization.

( Sole proprietorship;

( Partnership;

( Corporate entity (not tax-exempt);

( Corporate entity (tax-exempt);

( Government entity (Federal, State, or local);

( Foreign government;

( International organization per 26 CFR 1.6049-4;

( Other ____________________.

(5) Common parent.

( Offeror is not owned or controlled by a common parent:

( Name and TIN of common parent:

Name ____________________________________

TIN ______________________________________

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( is, ( is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it ( is, ( is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it ( is, ( is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it ( is, ( is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it ( is, ( is not a women-owned small business concern.

Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it ( is, a women-owned business concern.

(7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. [Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.]

(i) [Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).] The offeror represents as part of its offer that it ( is, ( is not an emerging small business.

(ii) [Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).] Offeror represents as follows:

(A) Offeror’s number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or

(B) Offeror’s average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts).

(Check one of the following):

Number of Employees

Average Annual Gross Revenues

( 50 or fewer

$1 million or less

( 51-100

$1,000,001-$2 million

( 101-250

$2,000,001-$3.5 million

( 251-500

$3,500,001-$5 million

( 501-750

$5,000,001-$10 million

( 751-1,000

$10,000,001-$17 million

( Over 1,000

Over $17 million

(9) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.]

(i) General. The offeror represents that either—

(A) It ( is, ( is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the database maintained by the Small Business Administration (PRO-Net), and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or

(B) It ( has, ( has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted.

(ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.]

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It ( is, ( is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified by the Small Business Administration in accordance with 13 CFR part 126; and

(ii) It ( is, ( not a joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for the HUBZone small business concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the HUBZone small business concern or concerns that are participating in the joint venture: __________.] Each HUBZone small business concern participating in the joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Representations required to implement provisions of Executive Order 11246 --

(1) Previous contracts and compliance. The offeror represents that --

(i) It ( has, ( has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It ( has, ( has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that --

(i) It ( has developed and has on file, ( has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It ( has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $100,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act – Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. The terms “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American Act—Supplies.”

(2) Foreign End Products:

LINE ITEM NO.

COUNTRY OF ORIGIN

[List as necessary]

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(g)

(1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian or Moroccan end product,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and ‘United States’ are defined in the clause of this solicitation entitled “Buy American Act--Free Trade Agreements--Israeli Trade Act.”

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian or Moroccan end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products:

LINE ITEM NO.

COUNTRY OF ORIGIN

[List as necessary]

(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products.

Other Foreign End Products:

LINE ITEM NO.

COUNTRY OF ORIGIN

[List as necessary]

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(2) Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act”:

Canadian End Products:

Line Item No.:

[List as necessary]

(3) Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'':

Canadian or Israeli End Products:

Line Item No.:

Country of Origin:

[List as necessary]

(4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.”

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products

Line Item No.:

Country of Origin:

[List as necessary]

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Debarment, Suspension or Ineligibility for Award (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--

(1) ( Are, ( are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; and

(2) ( Have, ( have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, or receiving stolen property; and

(3) ( Are, ( are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses.

(i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).]

(1) Listed End Product

Listed End Product

Listed Countries of Origin:

(2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.]

( (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product.

( (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.

(j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly—

(1) ( In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) ( Outside the United States.

(k)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (k)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website.

(2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov .After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (b) through (j) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.]

DESCRIPTION OF PRODUCT

1. SCOPE OF CONTRACT

The Contractor shall supply the following dock requirements to the locations specified at each Project site. NOTE: There are various delivery dates requested for A – D, and multiple locations for delivery in C and D of the following specifications. Field assembly and installation will be provided by the government.- A. Hideout Campground Dock Project: (delivery by April 20th)

Delivery location: Sheep Creek Boat Ramp near Manila, Utah – Delivery Location #1 on map

1. Double “T” dock (1).

Approx total 61ft wide by 86 ft in length. A total of ten 8 x 20 dock sections. Frame: 12” hot-dipped galvanized steel truss frame, welded using fillet & butt welds, structural angle members conform to ASTM A50, grind all external welds flush before galvanizing, hot dip galvanized after fabrication. Floats : 1/8” permacase float with rotational molded one piece polyethylene shell, water absorption shall not exceed 5% by volume, deck floatation liveload 25 minimum psf, deadload freeboard approx 18” -22”, float nearest to shore angled to rest on beach. Piano hinges (9): 8’ galvanized steel, heavy duty, at each section connection. Mooring Cleats (38): deck “S” cleats, 6” with bolts. Cable/chain Attachment Brackets (2): galvanized steel. Winches (4): with holding capacity of 10,000 lbs and lifting capacity of 3,000 lbs, handle and pinion assembly, with 100’ of 5/8” galvanized wire rope cable, with pedestal, mounting holes and hardware. Decking: 2”x 6” longitudinal moisture shield wood composite polymer (recycled plastic lumber), with simulated grain finish, cedar in color, installed with approximate 1/8” spacing, attached with 2 screws at each deck support, maximum span for composite decking is 20” between 2” side truss angles on 2’ frames. Fender/Bumpers: wood composite moisture shield sidewood along perimeter of dock, attached with torx head screws. Gangway: one 4’ x 16’ aluminum non-slip decking with handrails, pin connection end, fifth wheel/rotating dock bridge connection with smooth hinge plate, gangway to shore connector –roller and treadplate end.

2. Straight single docks (10).

Two 8 x 16 ft dock sections bolted end to end with piano hinge. Total size approx 8 x 28. Frame: 12” hot-dipped galvanized steel truss frame, welded using fillet & butt welds, structural angle members conform to ASTM A50, grind all external welds flush before galvanizing, hot dip galvanized after fabrication. Floats : 1/8” permacase float with rotational molded one piece polyethylene shell, water absorption shall not exceed 5% by volume, deck floatation liveload 25 minimum psf, deadload freeboard approx 18” -22”, float nearest to shore angled to rest on beach. Piano Hinge: galvanized steel heavy duty, at each section connection. Mooring Cleats (10): deck “S” cleats, 6” with bolts. Cable/chain galvanized steel Attachment Brackets (2). Winches (2): handle and pinion assembly, with 100’ of 5/8” galvanized wire rope cable, with pedestal, mounting holes and hardware. Decking: 2”x 6” longitudinal moisture shield wood & recycled plastic lumber, with simulated grain finish, cedar in color, installed with approximate 1/8” spacing, attached with 2 screws at each deck support, maximum span for composite decking is 20” between 2” side truss angles on 2’ frames. Fenders/bumpers: composite moisture shield side wood along perimeter of dock, attached with torx head screws Gangway: approx 4 x 8 non-slip surface with pin connection end, designed to flip over onto the dock for winter storage or other approved design. Please submit gangway specifications for approval.

B. Kingfisher Island Campground Dock Project: (delivery by May 4th or earlier)

Delivery location: Sheep Creek Boat Ramp near Manila, Utah - Delivery Location #1 on map.

1. Single “T” Dock (2)

An 8’ x 60’ Tee dock with an 8’ x 40’ primary base. A total of five 8 x 20 dock sections. Frame: 12” hot-dipped galvanized steel truss frame,welded using fillet & butt welds, structural angle members conform to ASTM A50, grind all external welds flush before galvanizing, hot dip galvanized after fabrication. Floats : 1/8” permacase float with rotational molded one piece polyethylene shell, water absorption shall not exceed 5% by volume, deck floatation liveload 25 minimum psf, deadload freeboard approx 18” -22”, float nearest to shore angled to rest on beach. Piano hinges (5): 8’ galvanized steel, heavy duty, at each section connection. Mooring Cleats (18): deck “S” cleats, aluminum 6” with bolts. Cable/chain Attachment Brackets (2): galvanized steel. Winches (2): with holding capacity of 10,000 lbs and lifting capacity of 3,000 lbs, handle and pinion assembly, with 100’ of 5/8” galvanized wire rope cable, with pedestal, mounting holes and hardware. Decking: 2”x 6” longitudinal moisture shield wood composite polymer (recycled plastic lumber), with simulated grain finish, cedar in color, installed with approximate 1/8” spacing, attached with 2 screws at each deck support, maximum span for composite decking is 20” between 2” side truss angles on 2’ frames. Fender/Bumpers: wood composite moisture shield side wood along perimeter of dock, attached with torx head screws. Gangway: one 4’ x 16’ aluminum non-slip decking with handrails, pin connection end, fifth wheel/rotating dock bridge connection with smooth hinge plate, gangway to shore connector –roller and tread plate end.

C. Floating Campsite Docks (14). (Delivery by June 1st or earlier) Location: 5 delivered to Buckboard Crossing Boat Ramp near Green River, Wyoming Delivery location #2 on map Location: 5 delivered to Anvil Draw near Green River, Wyoming Delivery location #3 on map Location: 2 delivered to Lucerne Valley Boat Launch, near Manila, Utah Delivery location #3 on map Location: 3 delivered to Cedar Springs Boat Launch, near Dutch John, Utah Delivery location #4 on map

1. Approx 24 x 24’ Dock or other approved configuration- submit designs

A total of nine 4’ x 12’ dock sections, decked with wood composite, with encapsulated Permacase floatation. No gangway. Frame: 12” hot-dipped galvanized steel truss frame, welded using fillet & butt welds, structural angle members conform to ASTM A50, grind all external welds flush before galvanizing, hot dip galvanized after fabrication. Floats : 1/8” permacase float with rotational molded one piece polyethylene shell, water absorption shall not exceed 5% by volume, deck floatation live load 25 minimum psf, dead load freeboard approx 18” -22”, Piano hinges galvanized steel, heavy duty, at each section connection. Mooring Cleats (10) deck “S” cleats, 6” with bolts. Cable/chain Attachment Brackets (2): galvanized steel. Winches (2): with holding capacity of 10,000 lbs and lifting capacity of 3,000 lbs, handle and pinion assembly, with 100’ of 5/8” galvanized wire rope cable, with pedestal, mounting holes and hardware. Decking: 2”x 6” longitudinal moisture shield wood. composite polymer (recycled plastic lumber), with simulated grain finish, cedar in color, installed with approximate 1/8” spacing, attached with 2 screws at each deck support, maximum span for composite decking is 20” between 2” side truss angles on 2’ frames. Fender/Bumpers: wood composite moisture shield sidewood along perimeter of dock, attached with torx head screws.

D. Single Camping Docks (2) (Delivery by June 1st or earlier)

Location: 1 delivered to Sheep Creek Boat Launch, near Manila, Utah Delivery location #1 on map

Location: 1 delivered to Lucerne Boat Launch, near Manila, Utah Delivery location #3 on map 4’ x 24’ straight dock, three 8 x 12 dock sections attached end to end, decked with wood composite, with encapsulated floatation. Frame: 12” hot-dipped galvanized steel truss frame, welded using fillet & butt welds, structural angle members conform to ASTM A50, grind all external welds flush before galvanizing, hot dip galvanized after fabrication. Floats : 1/8” permacase float with rotational molded one piece polyethylene shell, water absorption shall not exceed 5% by volume, deck floatation live load 25 minimum psf, dead load freeboard approx 18” -22”, Piano hinges (2) galvanized steel, heavy duty, at each section connection. Mooring Cleats (10) deck “S” cleats, 6” with bolts. Cable/chain Attachment Brackets (2): galvanized steel.