S-15-0028_SF330.pdf

SERVICE RFQ SOL NO: AG-8173-S-15-0028

UNIT: APACHE-SITGREAVES NFs

PROJ NAME: REDESIGN OF NFSR 105

1. CONTRACT NO.

ARCHITECT-ENGINEER CONTRACT 2. DATE OF CONTRACT

3A. NAME OF ARCHITECT-ENGINEER 3B. TELEPHONE NO. (Include Area Code)

3C. ADDRESS OF ARCHITECT-ENGINEER (Include ZIP Code)

4. DEPARTMENT OR AGENCY AND ADDRESS (Include ZIP Code)

USDA FOREST SERVICE APACHE-SITGREAVES NFS

SUPERVISOR’S OFFICE - AQM

30 S. CHIRICAHUA DRIVE PO BOX 640

SPRINGERVILLE, AZ 85938

5. PROJECT TITLE AND LOCATION

Redesign of National Forest System Road (NFSR) 105 Black Mesa Ranger District, Overgaard, AZ 85933.

6. CONTRACT FOR (General description of services to be provided)

National Forest System Road 105 is located on the Black Mesa Ranger District and provides access from NFSR 300 to the Woods Canyon Lake Boat Ramp and access to the Woods Canyon Lake Recreation Area Campgrounds, Rocky Point Picnic Area and a convenience store. It is approximately 1.6 miles long and an average paved width of 20’ with no shoulders. The road was constructed in the early 1970's and has exceeded its life expectancy, the existing template is not adequate for current and future use, there are drainage issues under the road bed causing continual maintenance challenges and degradation to the pavement and has some site distance concerns. Work will include topographic survey of the roadway corridor to accommodate the redesign, geotechnical work to develop a structural section for an all-weather asphalt surfaced road, Construction plans and specifications stamped by a registered Engineer in the state of Arizona to be put out to bid at a future date by the forest service for the work and a cost estimate broken out by construction activities (removal/ pulverization of existing road way, clearing and grubbing, sub base, base, asphalt, etc.).

DEADLINE TO SUBMIT A RESPONSE: JULY 24, 2015, 3:00 P.M. MOUNTAIN STANDARD TIME

7. CONTRACT AMOUNT (Express in words and figures)

8. NEGOTIATION AUTHORITY

40 U.S.C. 541. Public Law 92-582

9. ADMINISTRATIVE, APPROPRIATION, AND ACCOUNTING DATA

IAS Requisition – BOC 2540

10. The United States of America (called the Government) represented by the Contracting Officer executing this contract, and the Architect-

Engineer agree to perform this contract in strict accordance with the clauses and the documents identified as follows, all of which are made a part of this contract:

Pages 3-30 of Solicitation AG-8173-S-15-0028 Contract Specifications: 11 pages Wage Determination: 2005-2023, rev 13, 10 pages

If the parties to this contract are comprised of more than one legal entity, each entity shall be jointly and severally liable under this contract.

The parties hereto have executed this contract as of the date recorded in Item 2.

SIGNATURES NAMES AND TITLES (Typed)

11. ARCHITECT-ENGINEER OR OTHER PROFESSIONAL SERVICES CONTRACTOR

A

B

C

D

12. THE UNITED STATES OF AMERICA

CONTRACTING OFFICER

STANDARD FORM 252 (REV. 10-83)

PART I—THE SCHEDULE

SECTION B--SUPPLIES OR SERVICES AND PRICES/COSTS

SCHEDULE OF ITEMS

The Contractor shall furnish all personnel, facilities, equipment, materials, transportation, lodging, incidentals, supplies and services and otherwise do all things necessary for Redesign of National Forest System (NFSR) 105, on Black Mesa Ranger District located near Heber, AZ, in Coconino County.

REDESIGN NATIONAL FOREST SYSTEM ROAD 105

ITEM

No.

DESCRIPTION UNIT QTY

TOTAL COST or

PRICE

B1.1

Complete a topographic survey of the road and provide in an Autodesk AutoCAD version 13 or later format

JOB 1 $

B2.1 Provide geotechnical report and the recommended structural section with

JOB 1 $

B3.1

Provide a drainage design to address lower portion of the roadway impacted by springs.

o 30% design submittal o 60% design submittal o 95% design submittal

JOB 1 $

Grand Total of Base Line Items $

OPTION

ITEM

No.

DESCRIPTION UNIT QTY

TOTAL COST or

PRICE

O1.1

Provide a final Plan and Profile of the redesigned road and construction details.

o 30% design submittal o 60% design submittal o 95% design submittal

JOB 1 $

O2.1 Provide construction specifications JOB 1 $

Grand Total of Optional Items $

VENDOR COMPANY NAME:___________________________________________________

AUTHORIZED TO SIGN (NAME):________________________________________________

SIGNATURE:______________________________________ DATE:__________________

Introduction/ Background National Forest System Road 105 is located on the Black Mesa Ranger District and provides access from NFSR 300 to the Woods Canyon Lake Boat Ramp and access to the Woods Canyon Lake Recreation Area Campgrounds, Rocky Point Picnic Area and a convenience store. It is approximately 1.6 miles long and an average paved width of 20 feet with no shoulders. The road was constructed in the early 1970's and has exceeded its life expectancy, the existing template is not adequate for current and future use, there are drainage issues under the road bed causing continual maintenance challenges and degradation to the pavement and has some site distance concerns.

Objectives The objective of this project is to provide technical design and construction plans and specifications to reconstruct the roadway to meet current and future use, add turning lanes, provide adequate site distance, and provide good drainage for the construction of an all-weather road.

Scope of Work Work will include topographic survey of the roadway corridor to accommodate the redesign, geotechnical work to develop a structural section for an all-weather asphalt surfaced road, Construction plans and specifications stamped by a registered Engineer in the state of Arizona to be put out to bid at a future date by the forest service for the work and a cost estimate broken out by construction activities (removal/ pulverization of existing road way, clearing and grubbing, sub base, base, asphalt, etc.)

Design Parameters:

25 mph design speed 2-11 foot paved lanes with 2 foot aggregate surfaced shoulders for a finished road width of 26 feet Turn lane into Spillway Campground Turn lane into Aspen Campground

Deliverables (Base Items and Option Items):

o Complete a topographic survey of the road and provide in an Autodesk AutoCAD version 13 or later format.

o Provide geotechnical report and the recommended structural section(s).

o Provide a drainage design to address lower portion of the roadway impacted by springs.

o 30% design submittal o Provide a final Plan and Profile of the redesigned road and construction details.

o 30% design submittal o Provide construction specifications.

SECTION D--PACKAGING AND MARKING

{For this Solicitation, there are NO clauses in this Section}

SECTION E--INSPECTION AND ACCEPTANCE

FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): www.arnet.gov/far/

FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES

52.246-4Inspection of Services--Fixed-Price (AUG 1996)

SECTION F--DELIVERIES OR PERFORMANCE

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): www.arnet.gov/far/

52.242.15 Stop Work Order (AUG 1989)

52.242-17 Government Delay of Work (APR 1984)

AGAR 452.211-74 Period of Performance (FEB 1988)

The period of performance of this contract is one hundred-twenty (120) calendars from issuance of notice-to-proceed.

AGAR 452.211-75 Effective Period of Contract (FEB 1988)

The effective period of this contract is from August 7, 2015 through January 31, 2016.

http://www.arnet.gov/far/

SECTION G--CONTRACT ADMINISTRATION DATA

GOVERNMENT-FURNISHED PROPERTY

{For this Solicitation, there are NO clauses in this Section}

SECTION H--SPECIAL CONTRACT REQUIREMENTS

AGAR 452.237-74 Key Personnel (FEB 1988)

(a) The Contractor shall assign to this contract the following key personnel:

a. Registered Civil Engineer – experienced with design of low volume, low speed, rural roadways

b. Geotech

AS PER SF 330 or equivalent documents

(b) During the first ninety (90) days of performance, the Contractor shall make no substitutions of key personnel unless the substitution is necessitated by illness, death, or termination of employment. The Contractor shall notify the Contracting Officer within 15 calendar days after the occurrence of any of these events and provide the information required by paragraph (c) below. After the initial 90-day period, the Contractor shall submit the information required by paragraph (c) to the Contracting Officer at least 15 days prior to making any permanent substitutions.

(c) The Contractor shall provide a detailed explanation of the circumstances necessitating the proposed substitutions, complete resumes for the proposed substitutes, and any additional information requested by the Contracting Officer.

Proposed substitutes should have comparable qualifications to those of the persons being replaced. The Contracting Officer will notify the Contractor within 15 calendar days after receipt of all required information of the decision on substitutions.

The contract will be modified to reflect any approved changes of key personnel.

SECTION I--CONTRACT CLAUSES

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.arnet.gov/far/ www.usda.gov/procurement/policy/agar.html

52.202-1 Definitions (NOV 2013) 52.203-2 Certificate of Independent Price Determination (APR 1985) 52.203-3 Gratuities (APR 1984) 52.203-5 Covenant Against Contingent Fees (MAY 2014) 52.203-6 Restrictions on Subcontractor Sales to the Government (SEP 2006) 52.203-7 Anti-Kickback Procedures (MAY 2014) 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity (MAY 2014) 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity (MAY 2014) 52.203-12 Limitation on Payments to Influence Certain Federal Transactions (OCT 2010) 52.209-6 Protecting the Government's Interest when Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (AUG 2013) 52.215-2 Audit and Records -- Negotiation (OCT 2010) 52.215-8 Order of Precedence--Uniform Contract Format (OCT 1997) 52.222-3 Convict Labor (JUN 2003) 52.222-4 Contract Work Hours and Safety Standards Act -- Overtime Compensation (MAY 2014) 52.222-21 Prohibition of Segregated Facilities (FEB 1999) 52.222-26 Equal Opportunity (MAR 2007) 52.222-35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and other Eligible Veterans

(SEP 2010)

52.222-36 Affirmative Action for Workers with Disabilities (OCT 2010) 52.222-37 Employment Reports on Veterans (JUL 2014) 52.222-41 Service Contract Act of 1965, as Amended (MAY 2014) 52.222-50 Combating Trafficking in Persons (MAR 2015) 52.223-5 Pollution Prevention and Right-to-Know Information (MAY 2011) 52.223-6 Drug-Free Workplace (MAY 2001) 52.223-15 Energy Efficiency in Energy-Consuming Products (DEC 2007) 52.225-1 Buy American—Supplies (MAY 2014) 52.225-13 Restrictions on Certain Foreign Purchases (JUN 2008) 52.227-1 Authorization and Consent (DEC 2007) 52.227-2 Notice and Assistance Regarding Patent and Copyright Infringement (DEC 2007) 52.228-5 Insurance—Work on a Government Installation (JAN 1997) 52.229-3 Federal, State, and Local Taxes (FEB 2013) 52.232-1 Payments (APR 1984) 52.232-8 Discounts for Prompt Payment (FEB 2002) 52.232-9 Limitation on Withholding of Payments (APR 1984) 52.232-11 Extras (APR 1984) 52.232-17 Interest (MAY 2014) 52.232-23 Assignment of Claims (MAY 2014) 52.232-25 Prompt Payment (JUL 2013) 52.232-33 Payment by Electronic Funds Transfer –System for Award Management (JUL 2013) 52.233-1 Disputes (MAY 2014) 52.233-3 Protest After Award (AUG 1996) 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (APR 1984) http://www.usda.gov/procurement/policy/agar.html

52.242-13 Bankruptcy (JUL 1995) 52.242-14 Suspension of Work (APR 1984) 52.243-1 Changes--Fixed-Price (AUG 1987)--Alternate I (APR 1984) 52.244-6 Subcontracts for Commercial Items (MAR 2015) 52.245-1 Property Records (APR 2012) 52.246-25 Limitation of Liability—Services (FEB 1997) 52.248-1 Value Engineering (OCT 2010) 52.249-2 Termination for Convenience of the Government (Fixed-Price) (APR 2012) 52.249-8 Default (Fixed-Price Supply and Service) (APR 1984)

AGRICULTURE ACQUISITION REGULATION (48 CFR CHAPTER 4) CLAUSES

452.236-72 Use of Premises (NOV 1996) 452.236-73 Archaeological or Historic Sites (FEB 1988) 452.236-74 Control of Erosion, Sedimentation and Pollution (NOV 1996) 452.236-76 Samples and Certificates (FEB 1988) 452.236-77 Emergency Response (NOV 1996) 452.237-70 Loss, Damage, Destruction or Repair (FEB 1988) 452.237-75 Restrictions Against Disclosure (FEB 1988)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (JUL 2013)

(a) Definitions. As used in this provision—

“Data Universal Numbering System (DUNS) number” means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

“Data Universal Numbering System+4 (DUNS+4) number” means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.)

This 4-character suffix may be assigned at the discretion of the business concern to establish additional System for Award Management records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern.

“Registered in the System for Award Management (SAM) database” means that—

(1) The Offeror has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see Subpart 4.14), into the SAM database; and

(2) The offeror has completed the Core, Assertions, and Representations and Certification, and Points of contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The Offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process.

(4) The Government has marked the record “Active”.

(b)

(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the offeror’s name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number—

(i) Via the internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business name.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company physical street address, city, state and Zip Code.

(iv) Company mailing address, city, state and Zip Code (if separate from physical).

(v) Company telephone number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) Offerors may obtain information on registration at https://www.acquisition.gov.

(End of Provision)

Alternate I (Jul 2013). As prescribed in 4.1105(a)(2), substitute the following paragraph (b)(1) for paragraph (b)(1) of the basic provision:

(b)

(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the System for Award Management prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. If registration prior to award is not possible, the awardee shall be registered in the System for Award Management within 30 days after award or before three days prior to submission of the first invoice, whichever occurs first.

http://fedgov.dnb.com/webform https://www.acquisition.gov/ http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/04.htm#P569_70094

52.223-1 BIOBASED PRODUCT CERTIFICATION (MAY 2012)

As required by the Farm Security and Rural Investment Act of 2002 and the Energy Policy Act of 2005 (7 U.S.C.

8102(c)(3)), the offeror certifies, by signing this offer, that biobased products (within categories of products listed by the

United States Department of Agriculture in 7 CFR part 3201, subpart B) to be used or delivered in the performance of the contract, other than biobased products that are not purchased by the offeror as a direct result of this contract, will comply with the applicable specifications or other contractual requirements.

(End of provision)

52.223-2 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND CONSTRUCTION CONTRACTS (JUL 2012)

(a) In the performance of this contract, the contractor shall make maximum use of biobased products that are United

States Department of Agriculture (USDA)-designated items unless—

(1) The product cannot be acquired—

(i) Competitively within a time frame providing for compliance with the contract performance schedule;

(ii) Meeting contract performance requirements; or

(iii) At a reasonable price.

(2) The product is to be used in an application covered by a USDA categorical exemption (see 7 CFR 3201.3(e)). For example, all USDA-designated items are exempt from the preferred procurement requirement for the following:

(i) Spacecraft system and launch support equipment.

(ii) Military equipment, i.e., a product or system designed or procured for combat or combat-related missions.

(b) Information about this requirement and these products is available at http://www.biopreferred.gov.

(c) In the performance of this contract, the Contractor shall—

(1) Report to the environmental point of contact identified in paragraph (d) of this clause, with a copy to the

Contracting Officer, on the product types and dollar value of any USDA-designated biobased products purchased by the

Contractor during the previous Government fiscal year, between October 1 and September 30;

(2) Submit this report no later than—

(i) October 31 of each year during contract performance; and

(ii) At the end of contract performance; and

(3) Contact the environmental point of contact to obtain the preferred submittal format, if that format is not specified in this contract.

(d) The environmental point of contact for this contract is:

(End of clause) http://www.acquisition.gov/far/current/html/%20http:/uscode.house.gov/ http://www.acquisition.gov/far/current/html/%20http:/uscode.house.gov/ http://www.biopreferred.gov/

FAR 52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 1989)

In compliance with the Service Contract Act of 1965, as amended, and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.

5341 or 5332.

This Statement is for Information Only:

It Is Not A Wage Determination.

Employee Class Monetary Wage--Fringe Benefits

Forest Civil Engineer GS-12

FAR 52.246-20 WARRANTY OF SERVICES (MAY 2001)

(a) Definition. "Acceptance," as used in this clause, means the act of an authorized representative of the Government by which the Government assumes for itself, or as an agent of another, ownership of existing and identified supplies, or approves specific services, as partial or complete performance of the contract.

(b) Notwithstanding inspection and acceptance by the Government or any provision concerning the conclusiveness thereof, the Contractor warrants that all services performed under this contract will, at the time of acceptance, be free from defects in workmanship and conform to the requirements of this contract. The Contracting Officer shall give written notice of any defect or nonconformance to the Contractor 60 days from the date of acceptance by the government. This notice shall state either--

(1) That the Contractor shall correct or reperform any defective or nonconforming services; or

(2) That the Government does not require correction or reperformance.

(c) If the Contractor is required to correct or reperform, it shall be at no cost to the Government, and any services corrected or reperformed by the Contractor shall be subject to this clause to the same extent as work initially performed. If the Contractor fails or refuses to correct or reperform, the Contracting Officer may, by contract or otherwise, correct or replace with similar services and charge to the Contractor the cost occasioned to the Government thereby, or make an equitable adjustment in the contract price.

(d) If the Government does not require correction or reperformance, the Contracting Officer shall make an equitable adjustment in the contract price.

PART III--LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J--LIST OF ATTACHMENTS

EXHIBIT 1 WAGE DETERMINATION SCA – INCORPORATED HEREIN

EXHIBIT 2 SF 330 ADDITIONAL DOCUMENTS-- ATTACHED AS SEPARATE DOCUMENTS

EXHIBIT 1 WAGE DETERMINATION SCA

WD 05-2023 (Rev.-19) was first posted on www.wdol.gov on 12/30/2014

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2023 Diane C. Koplewski Division of | Revision No.: 19 Director Wage Determinations| Date Of Revision: 12/22/2014 Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Arizona

Area: Arizona Counties of Apache, Coconino, Gila, Maricopa, Navajo, Pinal, Yavapai **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.85 01012 - Accounting Clerk II 16.68 01013 - Accounting Clerk III 18.65 01020 - Administrative Assistant 25.36 01040 - Court Reporter 16.73 01051 - Data Entry Operator I 12.52 01052 - Data Entry Operator II 13.66 01060 - Dispatcher, Motor Vehicle 16.40 01070 - Document Preparation Clerk 13.55 01090 - Duplicating Machine Operator 13.55 01111 - General Clerk I 12.53 01112 - General Clerk II 13.67 01113 - General Clerk III 15.34 01120 - Housing Referral Assistant 20.78 01141 - Messenger Courier 12.33 01191 - Order Clerk I 12.32 01192 - Order Clerk II 14.86 01261 - Personnel Assistant (Employment) I 14.98 01262 - Personnel Assistant (Employment) II 16.76 01263 - Personnel Assistant (Employment) III 18.69 01270 - Production Control Clerk 20.26 01280 - Receptionist 12.58 01290 - Rental Clerk 14.97 01300 - Scheduler, Maintenance 16.66 01311 - Secretary I 16.66 01312 - Secretary II 18.64

01313 - Secretary III 20.78 01320 - Service Order Dispatcher 14.32 01410 - Supply Technician 25.36 01420 - Survey Worker 16.63 01531 - Travel Clerk I 13.28 01532 - Travel Clerk II 14.46 01533 - Travel Clerk III 15.61 01611 - Word Processor I 13.82 01612 - Word Processor II 15.78 01613 - Word Processor III 17.54 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 20.34 05010 - Automotive Electrician 20.30 05040 - Automotive Glass Installer 19.42 05070 - Automotive Worker 19.42 05110 - Mobile Equipment Servicer 16.62 05130 - Motor Equipment Metal Mechanic 22.69 05160 - Motor Equipment Metal Worker 19.62 05190 - Motor Vehicle Mechanic 21.59 05220 - Motor Vehicle Mechanic Helper 15.12 05250 - Motor Vehicle Upholstery Worker 18.14 05280 - Motor Vehicle Wrecker 19.62 05310 - Painter, Automotive 22.12 05340 - Radiator Repair Specialist 19.58 05370 - Tire Repairer 14.21 05400 - Transmission Repair Specialist 21.59 07000 - Food Preparation And Service Occupations 07010 - Baker 12.03 07041 - Cook I 10.50 07042 - Cook II 12.16 07070 - Dishwasher 8.60 07130 - Food Service Worker 10.17 07210 - Meat Cutter 16.58 07260 - Waiter/Waitress 9.75 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.50 09040 - Furniture Handler 10.88 09080 - Furniture Refinisher 16.50 09090 - Furniture Refinisher Helper 12.16 09110 - Furniture Repairer, Minor 14.59 09130 - Upholsterer 16.50 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 9.97 11060 - Elevator Operator 9.97 11090 - Gardener 12.96 11122 - Housekeeping Aide 11.10 11150 - Janitor 11.10 11210 - Laborer, Grounds Maintenance 10.31 11240 - Maid or Houseman 9.59 11260 - Pruner 10.14 11270 - Tractor Operator 12.53 11330 - Trail Maintenance Worker 10.31 11360 - Window Cleaner 12.00 12000 - Health Occupations 12010 - Ambulance Driver 13.87 12011 - Breath Alcohol Technician 18.71

12012 - Certified Occupational Therapist Assistant 24.60 12015 - Certified Physical Therapist Assistant 18.94 12020 - Dental Assistant 16.61 12025 - Dental Hygienist 34.70 12030 - EKG Technician 21.08 12035 - Electroneurodiagnostic Technologist 21.08 12040 - Emergency Medical Technician 13.87 12071 - Licensed Practical Nurse I 16.73 12072 - Licensed Practical Nurse II 18.71 12073 - Licensed Practical Nurse III 20.87 12100 - Medical Assistant 14.39 12130 - Medical Laboratory Technician 19.61 12160 - Medical Record Clerk 13.11 12190 - Medical Record Technician 15.57 12195 - Medical Transcriptionist 17.02 12210 - Nuclear Medicine Technologist 33.98 12221 - Nursing Assistant I 10.25 12222 - Nursing Assistant II 11.53 12223 - Nursing Assistant III 12.58 12224 - Nursing Assistant IV 14.12 12235 - Optical Dispenser 15.39 12236 - Optical Technician 14.85 12250 - Pharmacy Technician 14.15 12280 - Phlebotomist 14.12 12305 - Radiologic Technologist 24.34 12311 - Registered Nurse I 26.93 12312 - Registered Nurse II 33.08 12313 - Registered Nurse II, Specialist 33.08 12314 - Registered Nurse III 40.02 12315 - Registered Nurse III, Anesthetist 40.02 12316 - Registered Nurse IV 47.96 12317 - Scheduler (Drug and Alcohol Testing) 23.09 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 17.08 13012 - Exhibits Specialist II 21.08 13013 - Exhibits Specialist III 25.71 13041 - Illustrator I 18.79 13042 - Illustrator II 23.18 13043 - Illustrator III 28.27 13047 - Librarian 23.06 13050 - Library Aide/Clerk 14.20 13054 - Library Information Technology Systems 20.92 Administrator 13058 - Library Technician 14.08 13061 - Media Specialist I 15.03 13062 - Media Specialist II 16.81 13063 - Media Specialist III 18.75 13071 - Photographer I 14.99 13072 - Photographer II 17.27 13073 - Photographer III 21.32 13074 - Photographer IV 26.01 13075 - Photographer V 31.55 13110 - Video Teleconference Technician 16.68 14000 - Information Technology Occupations 14041 - Computer Operator I 15.04 14042 - Computer Operator II 17.51

14043 - Computer Operator III 20.13 14044 - Computer Operator IV 22.75 14045 - Computer Operator V 24.82 14071 - Computer Programmer I 23.00 14072 - Computer Programmer II 24.90 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.04 14160 - Personal Computer Support Technician 22.75 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.46 15020 - Aircrew Training Devices Instructor (Rated) 36.56 15030 - Air Crew Training Devices Instructor (Pilot) 40.22 15050 - Computer Based Training Specialist / Instructor 29.46 15060 - Educational Technologist 21.91 15070 - Flight Instructor (Pilot) 40.22 15080 - Graphic Artist 21.68 15090 - Technical Instructor 20.91 15095 - Technical Instructor/Course Developer 25.58 15110 - Test Proctor 16.87 15120 - Tutor 16.87 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.06 16030 - Counter Attendant 9.06 16040 - Dry Cleaner 11.32 16070 - Finisher, Flatwork, Machine 9.06 16090 - Presser, Hand 9.06 16110 - Presser, Machine, Drycleaning 9.06 16130 - Presser, Machine, Shirts 9.06 16160 - Presser, Machine, Wearing Apparel, Laundry 9.06 16190 - Sewing Machine Operator 12.05 16220 - Tailor 12.81 16250 - Washer, Machine 9.86 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 16.74 19040 - Tool And Die Maker 22.78 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 13.52 21030 - Material Coordinator 19.58 21040 - Material Expediter 19.58 21050 - Material Handling Laborer 11.91 21071 - Order Filler 12.24 21080 - Production Line Worker (Food Processing) 13.52 21110 - Shipping Packer 14.52 21130 - Shipping/Receiving Clerk 14.52 21140 - Store Worker I 9.13 21150 - Stock Clerk 14.39 21210 - Tools And Parts Attendant 13.52 21410 - Warehouse Specialist 13.52 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 26.77 23021 - Aircraft Mechanic I 25.34 23022 - Aircraft Mechanic II 26.77

23023 - Aircraft Mechanic III 28.40 23040 - Aircraft Mechanic Helper 17.74 23050 - Aircraft, Painter 24.07 23060 - Aircraft Servicer 21.28 23080 - Aircraft Worker 22.80 23110 - Appliance Mechanic 18.79 23120 - Bicycle Repairer 12.92 23125 - Cable Splicer 29.26 23130 - Carpenter, Maintenance 17.36 23140 - Carpet Layer 15.63 23160 - Electrician, Maintenance 20.14 23181 - Electronics Technician Maintenance I 18.00 23182 - Electronics Technician Maintenance II 23.29 23183 - Electronics Technician Maintenance III 25.37 23260 - Fabric Worker 14.70 23290 - Fire Alarm System Mechanic 19.80 23310 - Fire Extinguisher Repairer 15.17 23311 - Fuel Distribution System Mechanic 29.33 23312 - Fuel Distribution System Operator 20.70 23370 - General Maintenance Worker 17.48 23380 - Ground Support Equipment Mechanic 25.34 23381 - Ground Support Equipment Servicer 21.28 23382 - Ground Support Equipment Worker 22.80 23391 - Gunsmith I 15.17 23392 - Gunsmith II 18.14 23393 - Gunsmith III 21.09 23410 - Heating, Ventilation And Air-Conditioning 19.83 Mechanic 23411 - Heating, Ventilation And Air Contditioning 20.95 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.55 23440 - Heavy Equipment Operator 21.23 23460 - Instrument Mechanic 24.18 23465 - Laboratory/Shelter Mechanic 19.62 23470 - Laborer 11.55 23510 - Locksmith 19.50 23530 - Machinery Maintenance Mechanic 25.00 23550 - Machinist, Maintenance 17.73 23580 - Maintenance Trades Helper 13.00 23591 - Metrology Technician I 24.18 23592 - Metrology Technician II 25.25 23593 - Metrology Technician III 26.51 23640 - Millwright 23.72 23710 - Office Appliance Repairer 19.75 23760 - Painter, Maintenance 16.50 23790 - Pipefitter, Maintenance 20.86 23810 - Plumber, Maintenance 19.81 23820 - Pneudraulic Systems Mechanic 21.09 23850 - Rigger 21.09 23870 - Scale Mechanic 18.14 23890 - Sheet-Metal Worker, Maintenance 17.99 23910 - Small Engine Mechanic 16.52 23931 - Telecommunications Mechanic I 22.60 23932 - Telecommunications Mechanic II 26.99 23950 - Telephone Lineman 18.23 23960 - Welder, Combination, Maintenance 17.37

23965 - Well Driller 21.09 23970 - Woodcraft Worker 21.09 23980 - Woodworker 14.71 24000 - Personal Needs Occupations 24570 - Child Care Attendant 10.73 24580 - Child Care Center Clerk 16.79 24610 - Chore Aide 10.71 24620 - Family Readiness And Support Services 15.56 Coordinator 24630 - Homemaker 18.38 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.78 25040 - Sewage Plant Operator 22.71 25070 - Stationary Engineer 23.78 25190 - Ventilation Equipment Tender 14.81 25210 - Water Treatment Plant Operator 22.71 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.73 27007 - Baggage Inspector 11.01 27008 - Corrections Officer 19.52 27010 - Court Security Officer 20.49 27030 - Detection Dog Handler 16.13 27040 - Detention Officer 19.52 27070 - Firefighter 21.80 27101 - Guard I 11.01 27102 - Guard II 16.13 27131 - Police Officer I 25.69 27132 - Police Officer II 28.53 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.84 28042 - Carnival Equipment Repairer 15.17 28043 - Carnival Equpment Worker 9.89 28210 - Gate Attendant/Gate Tender 14.95 28310 - Lifeguard 11.90 28350 - Park Attendant (Aide) 16.73 28510 - Recreation Aide/Health Facility Attendant 12.21 28515 - Recreation Specialist 17.99 28630 - Sports Official 13.33 28690 - Swimming Pool Operator 19.72 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 19.45 29020 - Hatch Tender 19.45 29030 - Line Handler 19.45 29041 - Stevedore I 17.16 29042 - Stevedore II 21.45 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 17.49 30022 - Archeological Technician II 19.58 30023 - Archeological Technician III 24.25 30030 - Cartographic Technician 24.59 30040 - Civil Engineering Technician 21.56 30061 - Drafter/CAD Operator I 17.49 30062 - Drafter/CAD Operator II 19.84

30063 - Drafter/CAD Operator III 22.12 30064 - Drafter/CAD Operator IV 26.82 30081 - Engineering Technician I 16.02 30082 - Engineering Technician II 17.98 30083 - Engineering Technician III 21.48 30084 - Engineering Technician IV 25.33 30085 - Engineering Technician V 30.27 30086 - Engineering Technician VI 34.64 30090 - Environmental Technician 22.20 30210 - Laboratory Technician 22.92 30240 - Mathematical Technician 24.69 30361 - Paralegal/Legal Assistant I 21.19 30362 - Paralegal/Legal Assistant II 25.09 30363 - Paralegal/Legal Assistant III 30.61 30364 - Paralegal/Legal Assistant IV 37.15 30390 - Photo-Optics Technician 24.69 30461 - Technical Writer I 22.49 30462 - Technical Writer II 27.51 30463 - Technical Writer III 31.24 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74 30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 22.12 Surface Programs 30621 - Weather Observer, Senior (see 2) 24.12 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 8.17 31030 - Bus Driver 17.45 31043 - Driver Courier 13.84 31260 - Parking and Lot Attendant 10.32 31290 - Shuttle Bus Driver 15.35 31310 - Taxi Driver 10.88 31361 - Truckdriver, Light 15.35 31362 - Truckdriver, Medium 18.71 31363 - Truckdriver, Heavy 19.29 31364 - Truckdriver, Tractor-Trailer 19.29 99000 - Miscellaneous Occupations 99030 - Cashier 11.86 99050 - Desk Clerk 10.74 99095 - Embalmer 24.27 99251 - Laboratory Animal Caretaker I 10.57 99252 - Laboratory Animal Caretaker II 13.33 99310 - Mortician 28.19 99410 - Pest Controller 14.44 99510 - Photofinishing Worker 13.44 99710 - Recycling Laborer 18.15 99711 - Recycling Specialist 23.31 99730 - Refuse Collector 17.29 99810 - Sales Clerk 12.38 99820 - School Crossing Guard 8.69 99830 - Survey Party Chief 26.46 99831 - Surveying Aide 15.94 99832 - Surveying Technician 22.46 99840 - Vending Machine Attendant 14.89

99841 - Vending Machine Repairer 18.88 99842 - Vending Machine Repairer Helper 14.89

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.02 per hour or $160.80 per week or $696.79 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility.

(Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541.

Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R.

541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.gov/esa/whd/ or through the Wage Determinations On- Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form 1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

PART IV--REPRESENTATIONS AND INSTRUCTIONS

SECTION K--REPRESENTATIONS, CERTIFICATIONS, AND

OTHER STATEMENTS OF OFFERORS OR RESPONDENTS

NOTE: Offerors should address questions concerning VETS-100 reporting and reporting requirements to the Office of Veterans Employment and Training Services offices at the following address:

U. S. Department of Labor VETS-100 Reporting 4200 Forbes Blvd., Suite 202 Lanham, MD 20703 Telephone: (301) 306-6752 Website: www.vets100.cudenver.eduReporting Questions:

HelpDesk@vets100.com Reporting Verification: Verify@vets100.com

52.208-4 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JUL 2013)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 541330.

(2) The small business size standard is $14.0 Million.

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use…