Specifications_for_Mircroscope.docx

Brand Name or Equal

Specifications are based on a Leica model that meets the agencies minimum requirement. Offers must meet or exceed these specifications to be considered for award. Award will be made to the lowest priced offer that meets the below specifications.

DMI8 Fully Automated Inverted Microscopes with Motorized XYZ. Also includes Full Incubation System Computer Monitor and LASX Software.

DMi8 – universal for motorized ports The Leica DMi8 premium class modular research microscope provides all options of intelligent automation. This microscope is prepared for motorized camera side ports. Prepared for all contrasting methods depending to the optic carrier. Prepared for motorized magnification changer. Prepared for motorized or coded objective turret for all contrasting techniques and for 6x M25 thread objectives with 45mm parfocal distance. Prepared for manual, motorized Zfocus, electronic focus repositioning, electronic parfocality, automatic lowering prior to objective change. Leica HCS infinity optics, Field of view 25mm. The modularity of the Leica DMi8 offers different configuration options for -control elements like function keys or focus drives -optic carriers (with or without IMC) -front modules -manual coded DIC turret for Wollaston prisms -manual coded TL arms with different condenser systems -Stages and tubes -Camera port.

Controls(l) Encoder+Shutter+IL/FL+Diaph.

Controls left: Light, Shutter, switch between fluorescence and transmitted light and Field/Aperture Diapghragms

Controls(r) 4 Fkeys + Focusknobs Controls right: 4 programmable functionkeys and 3 focus keys

TouchScreen Touch Screen, for intuitive control of all microscope functions, contrasting techniques including status display.

THouse (1) for an ext.man./mot.FL.Axis DMi8 THouse(

1) = InfinityPort for Microscopes with one external fluorescence module to the rear and to hold all different transmitted light arms

Optic Carrier Optic Carrier for Leica DMi8 . Ushape lens system including 2 deflection prisms

Tube lens module 1x, fix Module with fix tube lens 1x

Tube, Bino Ergo Tube, Bino Ergo -Siedentopf design -For optimal ergonomy: eyepiece module in 2 directions mountable (up and down) -Field of view 25 mm -Eyepiece diameter 30 mm -Variable interpupillary distance range 55 mm to 75 mm -Variable viewing angle 30° to 45°

Eyepiece HC PLAN s 10x/25 Br. M Eyepiece HC PLAN s 10x/25 Br. M

Side Port left & right motorized, empty Motorized camera side port to the right hand side and left hand side prepared for variable camera/tube splits

Sideport Prism 100%, left Sideport prism with 100% transmission to the left motorized port.

Sideport Prism 100%, right Sideport prism with 100% transmission to the right motorized port.

ZFocus, motorized focus + AFC AFC. Adaptive Focus Control actively keeping the focus position over time -with encoded 12 mm travel range -with tactile course / fine motorized focus drive -with 4 gears and 5 sensitivity levels -with course / fine knob on each side of microscope

Nosepiece, motorized 6-fold revolver

Spill Protection Spill protection to protect the objective nosepiece against fluid

ICPrism C for objective IC objective prism C for nosepiece disc

ICT condenser prism K6 ICT condenser prism K 6

ICTcondenser prism K3 ICT condenser prism K3

TL arm, tiltable motorized with FD Motorized Transmitted Light Illumination Arm with integrated motorized field diaphragm (FD)with integrated tilting mechanism for specimens or micromanipulator clearance, integrated manual filter magazine for 2 replaceable filter positions, one position factoryequipped with a manul shutter, CQC "Condenser QuickChanger" for all manual coded and motorized condensers, lamp housing adapter for LED, integrated duct for the lamp housing cable.

LED lamp housing,TTL shutter,1.85m cable LED lamp house including 185 cm cable with TTL shutter

Condenser Base 140 f.fixed lens,motor Condenser Base 140 for fixed lens, motorized For free working distances 1 to 40mm. Field of view 25mm.

The condenser base features: 7position disk to accommodate light rings, IC prisms or modulation slits. The disk can be equipped, individually. All transmitted light contrasting methods are possible (BF,PH, DF, Pol, DIC, IMC), including motorized aperture diaphragm, including fixed mount for interchangeable condenser heads. Possibility to mount polarizer and to mount filter holder (diameter 32mm). Including height adjustment and field diaphragm adjustment, including fixation of for Koehler illumination and adjustment tools and toolbox, suitable for all magnifications 1,25 up to 100x.

Condenser head 0.55 S28

Polarizer, motorized Motorized Polarizer. Motorized holder including polarizer. Wireless retrofit to motorized condenser bases

Analyzer Block

DIC Turret motorized Motorized 4fold Differential Interference Contrast Objective-Prism-Turret

Fluorescence Turret, 6x motorized Motorized 6fold fluorescence turret. Operation is via function-keys at the microscope, Touchscreen or Software according to the configuration

Fluorescence axis, motorized external Motorized external fluorescenceaxis module including -light fiber connection -including motorized diaphragms -slot for Leica fast external filter wheels

Filter cube GFP Filter cube GFP, size P Excitation: 470/40 Dichroic: 495 Emission: 525/50

Filter cube DAPI Filter cube DAPI Excitation: 350/50 Dichroic: 400 Emission: 460/50

Filter cube TXR Filter Cube TXR Excitation: 560/40 Dichroic: 585 Emission: 630/75

Filter cube Y5 Filter Cube Y5, size P Excitation: 620/60 Dichroic: 660 Emission: 700/75

Universal holding frame K Universal Mounting Frame K (for the scanning stage or 3plate stage) to fix Petri dishes with diameters from 20 mm up to 68 mm or to fix slides with a maximum length up to 120mm. Depending on the diameter and the height of Petri dishes a movable holding device is adjusted. Outer dimensions: 160x110mm

Universal Mounting Frame KM Universal Mounting Frame KM Mounting Frame for multiplates (with or without glass bottom) Adjustable spring clips allow to use trays sizes of 125128 x 8386 mm

Leica Scanning Stage Motorized Scanning Stage with motors below without 160x110 mm insert. Travel range: 127 x 83 mm. Max. Resolution 0,02µ 0,04µ. Reproducebility: <1 µ

SmartMove l²C SmartMove xyz control element with 4 Function keys and Status LED, I²C Connection

Cable scanningstage, XYadv. board Cable Scanning-stage / CTR Board XY advanced

CTR advanced Leica CTR Box advanced to control motorized microscope components with 6 slots for control boards for external components (e.g. motor stages), with 3x I²C, 2x USB, 1x serial on the master module

CTR Board XY Advanced CTR Board xy advanced, 25 pins, to control Scanning stages

External light source EL 6000 Leica EL6000, alignment-free external lightsource with attenuator and fast shutter (cable for shutter control EL6000 I²C NOT included 11500331). Including bulb, lifetime of bulb in average 2000h. For all Leica upright and inverted microscopes and stereo microscopes.

Liquid Light Guide for EL6000, 2m

Cable, ShutterControl EL6000 I²C Cable connection EXT with I²C, 50 cm

Obj. HC PL FL L 20x/0.40 CORR Objective HC PL FLUOTAR L 20x/0.40 CORR Free working distance: 6.9 mm Correction collar for use with Cover Glass of 0 2 mm Thickness

Obj. HCX PL FLUOTAR L 40x/0.60 CORR Objective HCX PL FLUOTAR L 40x/0.60 CORR Free working distance: 3.3 1.9mm For use with coverglasses of 02mm Correction Collar for coverslip thickness Useful and recommended for Integrated Modulation Contrast (IMC)

Obj. HC PL FLUOTAR 100x/1.320.60 OIL Objective HC PL FLUOTAR 100x/1.320.60 oil Semiapochromatic corrected oil objective with iris diaphragm, numerical aperture 1.32 0.60.

CO2Controller 2000 CO2 Controller 2000 For environmental system 2000 series. For Pressureless supply to closed chambers with less than 2 liters volume. Range of CO2 Concentration: 0 20 Vol%. Resolution of CO2 display: 0.1 Vol% Resolution of internal CO2 loop control: 0.01 Vol%

Humidifier 250 ml Humidifier to humidify the air in the Incubator P 2000, Incubator PM 2000, Incubator MMK 2000, Heatable Incubation Insert Pset 2000, Cooling/Temperable Incubation Insert Pset 2000 or any CO2Covers. This humidifier has a volume 250 ml and is connected to a CO2Controller.

Heating Unit 2000 Heating Unit 2000 The Heating Unit 2000 supplies the large Leica incubators with heated air. The heater is designed to heat up the air in the large incubators up to max. 30°C above ambient temperature.

TempController 20001 TempController 20001 For environmental system 2000 series. Temperature control unit with one channel to electrically heat various components. Resolution of temperature display: 0.1°C. Resolution of internal loop control: 0.01°C Range for setpoint values from 0.0 up to 60.0°C

Incubator i8, Variant 1

Universal Mounting Frame K100Set Universal Mounting Frame K100Set, consisting of: 1x Universal Mounting Frame K100 1x "35" Petri dishes POCSystems 1x "60" Petri dishes 1x LabTek chambers, Imaging Chamber (Zellcontact) 1x Ibidi chambers, LabTek (slides) and Imaging Chambers (Zellcontact)

CO2Cover HP CO2Cover HP The combination of this CO2Cover With the Heating Insert P and the Incubator ML is the optimum choice for live cell imaging with high microscope magnifications with a locally controlled CO2 environment. The Heating Insert P is suitable for petri dishes with a diameter of 35mm up to 58mm.

Top Frame KPSet Top Frame KPSet. A setup for the Universal Mounting Frame KPSet

DFC 365 FX kit

Leica DFC365 FX Leica DFC365 FX Digital highspeed, highsensitivity cooled black/white camera with additional NIR mode and 3 pixel clocking

Leica DFC365 FX Leica DFC365 FX Digital highspeed, highsensitivity cooled black/white camera with additional NIR mode and 3 pixel clocking

CMount HC 0.70x CMount adapter 0.70x for 2/3" Cameras

Demo Kit Professional Workstation 27 Inch Monitor and Software

Monitor for LAS AF 27 Inch, 2560x1400 Pi

HP SB ZR2740W SIPS 27IN

LAS X Professional Workstation Leica LAS X Professional Workstation HP Z440 consisting of:

Operating System : Win10 64BIT OS Processor: Intel Xeon E51620v3 3.5 10M 2133 4C CPU Main Memory: 16GB DDR42133 (4x4GB) RegRAM Graphics board: NVIDIA Quadro K620 2GB 1st GFX 1st Hard Drive: 256GB SATA 1st Solid State Drive 2nd Hard drive: 2 TB 7200 RPM SATA 2nd HDD DVD writer: 9.5mm Slim SuperMulti DVDRW 1st ODD Firewire card: IOI PCI Express x1 FWB 3Port ext. Others:

China Regulatory CCC Compliance Mark HP 3/3/3 Warranty Monitor adapter: HP DisplayPort To DVID Adapter HP Z440 Country Kit

Keyboard US ;USB Hub Keyboard US USB Hub

LAS X Premium without PC LAS X Premium without PC LAS X Premium is a package for users with a wide variety of multidimensional imaging requirements. With advanced functionality including image stitching, environmental control and mobile connection. LAS X Premium package includes 11640878 LAS X Core (not dongle protected) 11640879 Dongle for LAS X Optional Modules 11640874 LAS X Multi Channel Acquisition 11640873 LAS X TimeLapse 11640872 LAS X ZControl and SW Autofocus 11640854 LAS X 3D Visualization Basic 11640871 LAS X Mark and Find 11640870 LAS X Stitching 11640824 LAS X Environmental Control 11640829 LAS X Mobile Connection AF6000