S100024_attachments.pdf

AG-03R6-S-10-0024 Vegetation Collection Attachments, Page 1 of 7

ATTACHMENTS

The following attachments are a part of this solicitation and any resulting contract.

J- 2 Wage Determination No. 1976-1342, (Rev. 40), Dated 12/03/2009; 3 Pages

J- 3 Listing of Exhibits

Exhibit A - Example of Completed Tree Improvement Collection Cone Tag, 1 Page

Exhibit B - Tree Climbing Standards From FSH 6709.11, 2 Pages

Attachments, Page 2 of 7

Wage Determination No. 1976-1342, (Rev. 40), Dated 12/03/2009

Attachments, Page 3 of 7

Attachments, Page 4 of 7

Attachments, Page 5 of 7

Exhibit A - Example of Completed Tree Improvement Collection Cone Tag

Thompson Creek

GF/Xete

Jim Burwasser

8/21/2006

26 W.16 N.12

X

X X Pedigree #9687

USFS – Lolo NF – Superior RD

PP

Attachments, Page 6 of 7

Exhibit B - Tree Climbing Standards From FSH 6709.11

22.49 - Tree Climbing.

22.49a - Standards. The standards for tree climbing safety equipment are in 29 CFR 1910.268, 1926.104, and 1926.107, and American National Standards Institute (ANSI) A10.14 and Z133.1 Standards.

22.49b - Qualifications. The Regions, Stations, Area, and Institute shall develop a training and certification program for employees who climb trees in support of project work and activities (sec. 22.06, para. 7).

1. Tree climbing performed in support of smokejumper wildland fire suppression operations and activities shall be in accordance with FSH 5709.14, Smokejumper and Paracargo Handbook and the Interagency Smokejumper Training Guide.

2. Smokejumpers who engage in tree climbing in support of project work and activities shall comply with the requirements in sections 22.49 - 22.49e.

3. The program must include the following annual components:

a. Review the manufacturer's specifications on the use, care, and storage of climbing equipment and systems, including serviceability and retirement of worn or defective equipment and components.

b. Perform practice sessions on the use of basic climbing equipment and techniques.

c. Conduct training sessions on care, use, and storage of climbing equipment and systems with emphasis on climbing techniques, practices, and procedures.

d. Conduct training sessions on rescue operations and activities. Training should include a practicum on proper rescue techniques.

22.49c - Personal Protective Equipment. Climbing equipment must comply with the requirements of 29 CFR 1926.104 and 1926.107 and ANSI A10.14. The following PPE is required for tree climbing:

1. Climbing helmet with a 3 point (minimum) chin strap (UIAA approved).

2. Harness with a breaking strength of at least 5,400 pounds (24 kN).

3. Lanyard with a breaking strength of at least 5,400 pounds (24 kN).

4. Long-sleeved shirt and sturdy pants or coveralls.

5. Eye protection meeting the requirements of ANSI Z87.1.

6. Gloves during rappelling.

7. Appropriate footwear as identified by the JHA. Examples are soft-soled hiking boots, high-top tennis shoes, and crepe-soled work boots. When working with climbing spurs, wear boots with suitable heels to keep the spurs in place.

8. Other PPE as identified by the JHA.

9. An appropriate 10-person (minimum) first aid kit shall be available to each climbing team (refer to the Glossary).

22.49d - Procedures. Prepare a JHA and discuss it with the climbing team before the climbing assignment (sec. 22.08). Discuss how to accomplish the project on a day-to-day basis. Hold

Attachments, Page 7 of 7 periodic tailgate safety and health sessions. Tree climbing operations and activities shall be conducted by climbing teams only.

1. Preparing for Climb.

a. Determine from where radio contact can be made. When direct radio contact cannot be maintained from the job site, establish procedures to obtain help without leaving the injured climbers alone.

b. Team inexperienced climbers with an experienced climber to monitor the new climbers' technique and equipment use and provide advice.

c. Have rescue equipment ready for use at the tree.

d. Inspect equipment for excessive wear or breakage.

e. Determine which safety systems will be utilized for a specific climb.

f. Be aware of changes in the weather throughout the day.

2. During Climb.

a. Once you are in the tree, observe the different characteristics of the tree that were not evident from the ground. Adjust procedures and techniques as necessary to maintain safety. If safety cannot be maintained, the climber shall immediately descend.

b. Use a haul line for securing, supporting, and transporting equipment and tools that could hinder climbing activities. Keep protective coverings over sharp edges and pointed tips while not in use. Keep hands free of materials and tools while climbing.

c. When climbing, secure equipment and tools to yourself or to the tree. Always secure large tools to the tree. When using cutting tools, secure yourself to the tree with a steel cored lanyard or other cut-resistant lines.

d. Ensure that the ground person is certified for the level of work being performed. The ground person shall remain on the ground except when it is necessary to assist the climber.

22.49e - Safety Practices. Refer to the National Tree Climbing Field Guide (sec. 22.06, para. 7) for guidelines on safe tree climbing practices.