ATV_UTVs_Amended_Pages.docx

SECTION I--SUPPLIES OR SERVICES AND PRICES

ATV and UTV FOR CARIBOU - TARGHEE NATIONAL FOREST

UTV FOR BRIDGER-TETON NATIONAL FOREST

I- 1 – Schedule of Items

Line Item

Description

Quantity Unit of Issue Unit Price

Amount

I - 2: Quote on all items. Only quotes to the nearest cent will be accepted. The Government reserves the right to make an award on any item for a quantity less or greater than the quantity offered, at the unit cost or prices quoted.

I - 3: The Govermenent reserves the rights to make mulitiple awards under this solicitation.

I - 4: Delivery Date (after receipt of order):___________________________________________________

SECTION II - DESCRIPTION/SPECIFICATIONS/STATEMENT OF WORK

II- 1 – Scope of Work

This contract is a fixed-price contract under Federal Acquisition Regulation (FAR) Part 13 simplified acquisition procedures. It is for the purchase and delivery of one (1) UTV and one (1) ATV for the Caribou - Targhee National Forest meeting specifications in Section II – 3 and II – 4; and one (1) UTV for the Bridger-Teton National Forest meeting specifications in Section II-5. Delivery locations shall be found in Section II – 2.

II- 2 – Location or Delivery

· Vendor shall be responsible for delivery for line items 001 and 002 to:

Soda Springs Ranger District 421 W 2d South Soda Springs ID 83276

· Vendor shall be responsible for delivery for line items 003 to:

Bridger-Teton National Forest Service Pinedale Ranger District 29 E Fremont Lake Road Pinedale WY 82941

Delivery shall be made, during normal business hours 8am to 5pm, excluding any federal holidays. Contractor shall notify technical representative 48 hours prior to delivery. Notification shall be made in writing to the technical representative and Contracting Officer. Technical representative contact information will be made public upon award.

II- 3 – UTV Specifications and accessories

· 2015 Model Year

· 4-wheeled vehicle

· 4wd (on-demand)

· 875 cc w/ EFI (electronic fuel injection)

· 2-seater

· Dual A-Arm suspension with Anti-Sway Bar

· Minimum 11” ground clearance

· Width cannot exceed 50”

· Roll-Bar Cage

· 3,500 lb. Winch Installed

II- 4 – ATV Specifications

· 2 and 4 wheel drive with a solid rear axle.

· Automatic transmission and clutch

· 675CC liquid cooled and 4 stroke engine w/EFI (electronic fuel injection)

· Independent suspension

· Minimum 10” ground clearance

II-5 – UTV Spectifications

· Engine must be greater than 750cc and liquied cooled

· UTV must have a wheelbase of 75 inches or more

· UTV must be AWD/4x4/2x4 option

· UTV must have a payload of at least 1,500 lbs

· UTV must have a towing capacity of at least 2,000 lbs

· UTV must have a full windshield and at least a fabric type cab

· UTV must come equipped with a winch

II- 5 - Inspection Requirements

Final Inspection - a final physical inspection check shall be made upon delivery, any specifications not conforming to the provisions in section II – 3 or II – 4 shall be rejected.

II- 6 - Warranty

The Contractor shall guarantee the ATV and UTV’s along with all parts furnished, except for consumables and wear parts, against defective material and workmanship for a period of one (1) year from the date of acceptance, or the length of the manufacturer’s warranty, whichever is longer. The Contractor shall promptly correct any defects found, at no increase in the contract price.

If the Government returns supplies to the Contractor for correction or replacement under this clause. The Contractor shall be the source for warranty work regardless of the make of the component.