Sanitary_30_CU_FT_Mixer_Specifications.docx

Sanitary 30 CU FT Paddle Mixer Specifications

30-cf working capacity Paddle Mixer

· T304 Stainless Steel construction

· Welded arms and bolted T304 stainless steel paddle blades

· Self-aligning bearings.

· Anti-friction out board mounted bearings

· Easily disassembled seal housing providing access for cleaning and maintenance.

· Pure Teflon machined components

· Two (2) re-build kites included

· Assembly equipped with 1/8” NPT threaded connection.

· All pneumatic components plumbed and regulated

· 6" X 6” air actuated contour slide gate

· 110-VAC solenoid mounted and piped to actuator.

· Bolted outlet guard

· Bottom center discharge position

· Safety grate under access door.

· Safety switches actuated by removal of the grate.

· Safety switch pre-wired to NEMA4 box with e-stop box and reset switch.

· Support structure, providing 24” clearance between discharge outlet and floor.

· 20 HP TEFC motor, 3P, 60-Hz, 1800 RPM, 460-V.

· Shaft mounted torque-arm reducer

· Gear drive at approximately 31-rpm.

· Reducer filled with food grade gear oil (no petroleum oil)

· Right hand drive arrangement.

CONTROL PANEL:

· NEMA 12 carbon steel motor control panel with wiring to safety limit switches, motor.

· Required for 3-phase, 60-Hz, 460-volt service.

· 20-HP, 460-V, 3-P starter for agitator.

· Emergency stop reset button

· MIXER START push button - (1) shrouded lighted green.(illuminated with motor energized)

· MIXER STOP red, non-illuminated push button.

· Batching timer that will stop the mixer after a set amount of time.

· Internal product contact surfaces are mill finish.

· Welds ground flush.

· Discoloration removed.

· External steel support components (bearing plates, gussets, torque-arm bracket and

· structural legs) and main shaft bearings

· Mixer furnished with English and Spanish warning labels.

· Two Instruction manuals (Operations and Maintenance with spare parts list).