ADDED DATA DOC 23577905.pdf

ADDED DATA

NSN: 9535LLS054682 DOCUMENT: 23577905

Paragraph 4 Ordering data

4.1.1 Standard Specification for Aluminum and Aluminum -Alloy Sheet and Plate, ASTM-B-209 , dated 1 August 2007

4.1.2 Quantity is in pieces

4.1.3 Alloy number from Table 1: 5052

4.1.4 Temper number from Table 2 and Table 3 is: H32

4.1.5 Finish for sheet in nonheat-treatable alloys : mill finish

4.1.6 Sheet : flat

4.1.7 Dimensions (thickness, width, and length or coil size) 0.190" THK x

4" WIDTH X 96" LG

4.1.8 Tensile property limits and dimensional tolerances for sizes not covered in Table 2 or Table 3 of this specification and in ANSI H35.2, respectively

4.2 Orders for material meeting the requirements of this specification shall include the following information when required by the purchaser::

4.2.1 Supply of one of the pairs of tempers , (H14 or H24) or (H34 or H24), is excluded

4.2.2 Heat treatment in accordance with practice B918 is not required

Certification of Compliance that material is manufactured IAW ASTM-B- 209 is required

4.2.7 Certification is required

4.2.8 Marking for identification is required

4.2.9 Practices B 660 applies yes; if yes levels of preservation, packaging, and packing required

NO PAPER DIVIDERS.

ATTACH A COPY OF SPEC SHEET.

*** ATTACH A COPY OF PALLET DRAWING***

Shipping pallet needs to fully support the entire weight/length of the sheet and be able to be moved with a forklift from the long side as well as the short side of the material. See provided drawing for specs.

***MAX SHIPMENT HEIGHT 9" INCLUDING THE PALLET.*** Extremely important that pallet be made in accordance with provided drawing.