A21-014 Item Description revised.pdf

DEPARTMENT OF THE AIR FORCE

76th MAINTENANCE SUPPORT GROUP (76 MXSG)

TINKER AIR FORCE BASE, OKLAHOMA

Item Description

Request for the purchase of 320 gallons of Sherwin Williams 16515 Gloss Gray (2.5 gal kit) NSN 8010PHM00357093 Brand Name or equal, in accordance with (IAW) the following:

Description:

• Sherwin Williams 16515 Gloss Gray (2.5 gal kit) NSN 8010PHM00357093, Brand Name or equal, that consists of 1 gallon F94 Series Gloss 85285 TY4 color 16515 Gray, 1 gallon MIL-PRF-85285 TY IV Gloss Curing Agent (hardener), and .5 gallons MIL-PRF-85285 TY IV Class H Gloss activated reducer 801OPHM00357093 per Mil-

PRF-85285 TY 4.

• Per AFMC IMT 202 Control Number MXAC 2021041-E-1, use of Topcoat Paint MIL- PRF-85285 Type IV FED-Std-595 Gray Color #16515 in lieu of Topcoat Paint MIL- PRF-85285 Type I FED-Std-595 Gray Color #16515 on AC 79-0002 is requested and is acceptable to use MIL-PRF-85285 Type IV Advanced Performance Coating (APC) in lieu of MIL-PRF-85285 Type I. Apply IAW TO 1-1-8, Ch. 6.

• Product shall have a minimum of 80% shelf life left at the time of delivery.

• Product shall be all the same Lot # (number), all the same Batch # (number).

• Contractor shall ensure paint required shall be from the same Lot and Batch numbers to prevent color issues.

• Contractor shall ensure there are no mixing variations.

• Upon delivery the Contractor shall provide verification and documentation that product(s) are of the same Lot and Batch numbers on the delivery report or on a separate inventory list.

• Contractor shall provide safety data sheets (SDS) and all safety information and documentation required by national safety standards and regulations.

• Contractor shall provide, upon delivery, a chemical inventory. A list (or inventory) of all known hazardous chemicals in the delivery [OFFICE ACRONYM] shall be included. The list shall be cross-referenced with the SDSs and shall be kept with this program and SDSs to serve as an index to help employees identify and locate necessary information.

• Contractor shall provide all related safety, health, and environmental regulations specific for the product that is not indicated anywhere else on the SDS. The information may include: • Any national and/or regional regulatory information of the chemical or mixtures (including any OSHA, Department of Transportation, Environmental Protection Agency, or Consumer Product Safety Commission regulations).

• Contractor shall inspect each product, prior to issuing and delivery, for damage or defects; and ensure that the product has been properly accounted for and listed on the delivery report.

• Contractor shall provide information upon delivery of product of all potential chemical hazards that may be encountered in the use of the product.