A2 - Purchase Description - Wire Printers - TASMG.pdf

Laser Wire Marker System

CLIN 0001) Laser Wire Marker System – Quantity 2

Salient Characteristics:

• Operates off of 110 volt AC standard wall plug.

• Operates off of shop supplied air, not a “dedicated” air source.

o Connection supplied for a standard pneumatic quick disconnect.

• Class 1 laser system.

• Laser System capable of moving to different locations in-facility and will not require recalibration when moved.

• Air-cooled, not water cooled.

• Print at least 40 feet per minute at maximum label capacity.

• Print Alpha/Numeric symbols in upper AND lower case options.

• Capability of printing no less than three 3 different messages; at least at the start, in the middle, and at end of wire run.

• Print operator determined variable spacing distances along the wire.

• Capable of printing on different wire sizes from 26 gauge up to 4 gauge wire.

• Capable of printing on different wire types; single strand, multi-strand, twisted pair, shielded, or any other commonly used aircraft type of wire.

• Print on wire lengths as short as 8 inches.

• Print wire lengths up to a maximum of 1000 foot rolls.

• Print on any UV Laser mark able wiring; including (but not limited to) TKT/TK

M22759 Series, ETFE, and XL-ETFE (such as BMS-13-48).

• Comply with MIL5088l, AS50881, and BAC5152 per aerospace standards.

• Conform to SAE ARP5607 (Legibility of Print).

• Equipped with Powered Coil Pans.

• Utilizes a belt type pulling mechanism for both round and twisted cabling.

• Utilizes a powered cutter system.

• Controlled by a vendor supplied stand-alone computer, with most current version of

Windows operating system with EXCEL spreadsheet program.

• Contains Integrated Laser Calibration Software capable of being driven by the vendor supplied computer.

• Designed for end user daily maintenance and preventative maintenance.

• Comes with an included warranty:

o Warranty repair “major repairs" must be accomplished within 40 business hours of notification at the MO AVCRAD facility.

• Repair parts readily available and easily installed, for minor repair by the owner of the equipment.

• All Owners Manuals, Safety Notices, Parts Manuals, and Repair manuals included for each system at the time of delivery.

• Vendor provided training for up to 6 people at the MO-TASMG facility for routine maintenance and Preventative Maintenance.

• Vendor provided training for up to 6 people at the MO-TASMG facility for proficient operating usage.

• Initial set-up at the MO-TASMG facility.