A06_Specifications.pdf

National Park Service, Glacier Bay National Park & Preserve, Technical Specifications Attachment

BRAND NAME OR EQUAL REQUIREMENT: Bobcat

A. UW56 Tool-cat Utility Work Machine (UWM)

B. M7047 Snow Blower: 32x68, Include R01-C04 Motor package: 160CC

C. 7453395 Sand Spreader: SP13

To qualify for consideration, either Brand Name or as an Or Equal product, each of the following

Salient Characteristics here-in shall be met or bettered. Package to be FOB Destination

Gustavus, Alaska.

1. Equipment Salient Characteristics:

1.1. UWM dimensions:

1.1.1. Length 140-150”

1.1.2. Width: 60” maximum

1.1.3. Height: 82” maximum

1.1.4. Ground clearance: 9”

1.1.5. Turning radius: 11’ 2”

1.1.6. Cargo bed: L56” xW51” xD10” minimum

1.1.7. Cargo bed capacity: 2000lbs

1.1.8. Lifting height 84.3”

1.1.9. Tires: 29x10.5-15

1.2. UWM engine/performance:

1.2.1. Diesel

1.2.2. Horsepower: 61hp turbocharged

1.2.3. Liquid cooled

1.2.4. Speed: 17.5 mph max/ travel speed 8.5 mph

1.2.5. Fuel tank: 20 gallon minimum

1.2.6. Emissions rating shall be EPA Tier 4

1.2.7. Transmission: Hydrostatic

1.2.8. Hydraulics: 3000psi, Std flow 18.8gpm, High flow 27.9gpm, variable flow

1.2.9. Lifting capacity: 1500lbs

1.2.10. 4-wheel drive with independent suspension

1.2.11. 4-wheel steering

1.2.12. Hydraulic fan

1.2.13. 4000lb towing capacity

1.2.14. Limited slip differentials

1.2.15. 2 speed transmission

1.2.16. Traction control

1.2.17. Hydraulic dump bed

1.2.18. In cab power attachment system

1.2.19. Engine block heater

1.3. UWM electrical:

1.3.1. 120-amp alternator

1.3.2. USB port and 12-volt power outlet in cab

1.3.3. 5” LCD display

1.3.4. Backup camera

1.3.5. Joystick implement control

1.3.6. LED work lights 4 front, 2 rear

1.3.7. DOT required lights to include headlights, taillights, turn signals, and flashers.

1.4. UMW safety:

1.4.1. Roll over protect system (ROPS)

1.4.2. Interlock control system for tilt and lift systems

1.4.3. Climate control Heat/AC

1.4.4. Lockable doors/ keyless start

1.4.5. Horn

1.4.6. Backup alarm

1.4.7. Rearview and side mirrors

1.4.8. Windshield wipers

1.4.9. Drivers’ suspension seat

1.4.10. Rear window guard

1.5. UMW attachments:

1.5.1. Snow blower:

1.5.1.1. 32”x68”

1.5.1.2. Hydraulic discharge chute 270°

1.5.1.3. 20” auger

1.5.1.4. Throwing distance 40’

1.5.1.5. Adjustable skid shoes

1.5.2. Sand spreader

1.5.2.1. Hopper capacity: 13.45 ft³

1.5.2.2. Spread pattern up to 30’

1.5.2.3. Variable speed control

1.5.2.4. 12-volt 1/2hp motor

1.5.2.5. Dash mounted controls

1.5.2.6. Stainless steel hopper

1.5.2.7. Vibrator kit

1.5.2.8. Spill guards

1.5.2.9. LED work light and Led strobe light

*Machine shall have the capability to switch non hydraulic attachments from the operator position **Machine to come turnkey and ready to operate all attachments

2. Manuals: Two copies each of operator’s, service, and parts manuals for Utility Work Machine as well as attachments shall be shipped to the delivery address at the time of purchase.

3. Warranty:

Manufacturer’s full coverage on engine and emission system shall be no less than five years or 5000 hours. Units to be factory tested to design specifications at full load conditions and all protective devices and control functions simulated and checked. All warranties to be performed by manufacturers certified technician using OEM parts. Manufacturers certified technician to be located no more than 100 miles or 2 hours travel time for emergency services.

4. Shipping and Delivery:

Entire package shall be prepped for barge or overland shipment. Complete FOB shipping address shall be to: The National Park Service, Glacier Bay National Park, 1 Park Road, Gustavus AK 99826.

FOB Delivery shall be completed no later than May 1, 2024,. Point of contact provided post-award.

Delivery days and hours are Monday- Friday 7am-3pm.