A05 SOW O-Ring 3136018 PC.docx

STATEMENT OF WORK

O-Ring For the MK 30 Mod 1 Target Program

1 Scope

This proposed contract is for procurement of O-Ring, NAVSEA Drawing 3136018-1 Rev B, Baseline with Drawing Reference, Sequential, and all associated drawings, changes, and specifications. The award shall be for a base year with one option year.

1.1 Background

The MK 30 Mod 1 Anti-Submarine Warfare (ASW) target is a heavyweight torpedo-sized underwater vehicle used to provide surface ships, submarines, and aircraft with realistic, reliable, available and economical ASW training.

The MK 30 Mod 1 target contains equipment that responds to active sonar and torpedo interrogation and provides radiated noise for passive sonar tracking and acoustic homing torpedoes. A submarine-like magnetic anomaly signature is also provided for use by ASW aircraft equipped with magnetic anomaly detection equipment. Though originally designed for use in the open ocean, recent design changes allow for littoral ASW training.

2 Applicable Documents

The following documents are applicable to this SOW to the extent specified herein. In case of conflict between the Contract Schedule, and this SOW, the order of precedence shall be in accordance with Federal Acquisition Regulation (FAR) 52.215-8.

2.1 Department of Defense specifications

2.2 Department of Defense standards

MIL-DTL-31000 – Technical Data Packages MIL-STD-100A – Standard Practice for Engineering Drawings DOD-STD-2101 – Standard Practice: Classification of Characteristics

2.3 Other Government Documents

N/A

2.4 Industry documents

SAE AMS7274 – Packing Preformed O-Ring Seal MIL-PRF-121 – Barrier Materials, Greaseproof, Waterproof, Flexible, Heat-Sealable SAE AMS2817 – Packing, Preformed Rubber Packaging ASTM D4727 – Fiberboard Corrugated Solid Sheet ISO 3601-3 – Quality Acceptance Criteria ASME-Y14.38 - Abbreviations and Acronyms for Use on Drawings and Related Documents ISO9001 - Quality Management System Requirements

3 Requirements

(a) CLIN 0001 – O-Ring Production (Qty. 600)

(1) The contractor shall manufacture O-Ring Production Lot in accordance with NAVSEA Drawing 3136018-1 Rev B, Baseline with Drawing Reference - Sequential, and all associated drawings, changes, and specifications. Inspection and Acceptance to be performed at NUWC Keyport by Code 522. The government will need 45 days for IU – End User Inspection

(b) CLIN 0002 – O-Ring Option 1 (Qty. 600)

3.1 General

a. Early and/or partial deliveries are acceptable.

3.2 Detail tasks

N/A

3.2.1 System engineering

a. Technical studies

b. System effectiveness planning

N/A