A03 CDRLS.pdf

DD Form 1423-1, SEP 97 (EG) (Computer Generated) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

C O N T R A C T D A T A R E Q U I R E M E N T S L I S T (1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT C. CATEGORY

D. SYSTEM/ITEM

Computer Radiography System

E. CONTRACT/PR NO.

F. CONTRACTOR

1. DATA ITEM NO.

2. TITLE OF DATA ITEM

Installation & Information Technology Documents

3. SUBTITLE

Installation Drawings and Software

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE

6. REQUIRING OFFICE

7. DD250 REQ

9. DIST

STATEMENT

REQUIRED

10. FREQUENCY

See Block 16

12. DATE OF FIRST SUBMISSION

See Block 16

14. DISTRIBUTION

b. COPIES

8. APP CODE

11. AS OF DATE

13. DATE OF SUBSEQUENT

SUBMISSION

See Block 16

a. ADDRESSEE Draft

Final

Reg Repro

16. REMARKS

The contractor shall provide (1) copy of this information in paper format, a maximum of 30-calendar-days after contract award. The contractor shall provide a second copy of this information in paper format at the time of delivery of the equipment. Installation and Information Technology information will provided detailing utility feed requirements, and computer hardware and software data.

1) Installation Utility Feeds: Contractor shall provide electrical circuit size required for the equipment to be provided, and if other utilities may also be required (such as air).

The contractor shall also identify whether filtration is needed.

2) Information Technology Information: The scanner and workstation shall be installed into the Army network. The US Army must maintain IT security to avoid malicious electronic attack. Because of that, close coordination with RIA, and Army IT personal is a requirement during project execution. The contractor shall define specific software and hardware to be provided by the contract. Contractor shall provide all information needed for approval of this system through the 106 Signal Corps (working through the JMTC IT Directorate) including Information Technology details of the system provided. At a minimum the contractor shall provide the Personal Computer manufacturer and chassis model number, operating system (Windows 7) manufacturer and version, software manufacturer and version. All necessary system drivers need to be identified, and comply with the Army Gold Image Standard. The contractor shall identify manufacturer model number, Mega pixel size and ports available for the monitor to be provided. The scanner to be provided will include IP address, communication port quantity and type, and data transmission documentation and hardware interfaces. All software ports and communication interfaces are required to be defined. Other relevant IT information may also be needed not addressed above.

PROVIDE COPIES TO THE FOLLOWING: David Holgerson

15. TOTAL

G. PREPARED BY

Tad Larson

H. DATE

October 3, 2023

I. APPROVED BY

J. DATE