A02 - SOW Yard Dock Dump Trailer .pdf

Yards and Docks Dump Trailer Ensley Engineer Yard

Statement of Work

Scope:

The Yards and Docks Unit located at Ensley Engineer Yard is purchasing a Big Tex 20LP-16 dump trailer.

Below are the specifications needed to fulfill the purchase:

• Axle – (2) 10,000lb oil bath with electric brakes

• Jack – 12,000lb side wind drop leg

• Neck – Integral with frame (10” I-beam, 19lb)

• Tire – ST235/75 R-17.5 load range J

• Floor – 7-gauge smooth steel

• Wheel – 17.5 x 6.75”; black mod, 8 bolt

• Lights – LED D.O.T stop, tail, turn, and clearance

• Couple – Adjustable 2-5/16” 21,000lb Demco EZ latch

• Fenders – 9’ x 72” 14GA diamond plate double square broke

• G.V.W.R. – 20,000lb

• Electrical Plug – 7-way RV

• Frame – 10” I-beam 19lb

• Suspension – Torsion axles

• Safety Chains – 3/8” grade 70 with (2) safety latch hook

• Dump Body Sides – 36” tall sides (10GA)

• Dump Body Top Rail – 3” x 2” rectangular tubing

• Dump Body Crossmembers – 3” channel, 16” centers

Place of Performance:

The vender will be responsible for the delivery of all items to 2915 Riverport Road, Memphis, TN 38109.

Vendor to ensure materials are securely delivered to address indicated. Any damage sustained during transport to 2915 Riverport Road will be the vendor’s responsibility to replace with new ones.

Type of Contract:

The Government shall award a Firm Fixed Price (FFP) Purchase Order. The Government POC for technical questions and delivery notification is Dennis Lewis at 901-579-3642 or by email at

Dennis.T.Lewis@usace.army.mil or Kevin Bland at 901-325-2832 or by email at

Kevin.W.Bland@usace.army.mil.

All contractor and all associated sub-contractors’ employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation

Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity

Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the mailto:Dennis.T.Lewis@usace.army.mil mailto:Kevin.W.Bland@usace.army.mil changes otherwise authorized by the changes clause of this contract, should the Force Protection

Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and

Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures

(provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

The Contractor must pre-screen Candidates using the E-verify Program ( http://www.e-verify.gov ) website to meet the established employment eligibility requirements. The Vendor must ensure that the

Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award.

http://www.e-verify.gov/