A02_SOW Dredge Jadwin Wire Rope for Haulage and Hoisting Winches.pdf

STATEMENT OF WORK

Scope of Work

The Dredge Jadwin requires wire rope for the haulage winches as well as the hoisting winches to be delivered NO LATER THAN 11 February 2022 in accordance with the requirements listed below. The wire rope for the haulage winches are utilized to help position the Dredge Jadwin as well advancement during dredging operations. The wire rope for the hoisting winches is utilized by the Dredge Jadwin to raise and lower the dustpan ladder assembly. The vendor shall provide all plant, labor, equipment, materials, and supplies necessary to furnish the required quantities of wire rope and deliver to 2449

Haining Road, Vicksburg, MS. The wire rope must be delivered on a flatbed truck so that it can be unloaded with an overhead crane or fork truck.

Requirements

Haulage Winch (Galvanized) 1 1/8” Wire Rope

Quantity 4 ea. @ 5000’

Product: 6 x 26 1 1/8" EEIPS IWRC DRY RRL GALV FT

Construction: 6 x26

Const. Type: 10/5+5/5/1

Specification: DRY

Grade: EEIPS

Core Type: IWRC

Diameter: 1 1/8”

Lay: RIGHT REG

Finishing: GALVANIZED

• 4 reels of wire with 5000 ft on each reel

• Vendor is required to provide mill test Certificates and certifications

Hoisting Wire Rope 7/8” Wire Rope

Quantity 4 ea. @ 1150’

Product: 6 x 36 7/8" EIPS IWRC LUB D RRL BRT FT

Construction: 6 x 36

Const. Type: 14/7+7/7/1

Specification: LUB D

Grade: EIPS

Core Type: IWRC

Diameter: 7/8"

Lay: RIGHT REG

Finishing: BRIGHT

• 4 reels of wire with 1150 ft on each reel

• Vendor is required to provide mill test Certificates and certifications

Delivery

Deliveries shall be made to the Dredge Jadwin at the following address:

2449 Haining Rd

Vicksburg, MS, 39183

ATTN: Paul McMaster