A0001.pdf
PDF 144 KB Posted
- Attached to
- Vector Network Analyzers Federal contract opportunity
- Solicitation number
- W9124P-20-R-0012
About this file
This document contains a government file specifying technical requirements for vector network analyzers and the related federal contract opportunity. The government file outlines minimum specifications for twenty-two vector network analyzers to be purchased by the U.S. Army TMDE Activity, including a frequency range of 10MHz to 26.5GHz, full 2-port S-parameters, a dynamic range of 120dB, verification through a mechanical calibration kit or electronic calibration module, and calibration modules that calibrate Type-N and 3.5mm connectors separately. The related federal contract opportunity is a re-solicitation from the Department of the Army Materiel Command Contracting Command at Redstone Arsenal for vector network analyzers, with the previous solicitation canceled due to an inadvertent omission of the small business set-aside designation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| W9124P-20-R-0012_Solicitation.pdf | ||
| A0002.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W80RA6-33-20C
MINIMUM SPECIFICATIONS FOR
Vector Network Analyzer
1.0 Objective. The U.S. Army TMDE Activity (USATA) located at Redstone Arsenal Alabama has a requirement to purchase twenty-two (22) Vector Network Analyzers for use at USATA Transfer (T-level) laboratories. Products must be Fully sustainable through current Army USATA calibration standards listed below:
2.0 Minimum Technical Specifications
• Frequency Range 10MHz-26.5GHz
• Full 2-port S-parameters
• Dynamic Range 120dB (+20/-100 dB)
• Full verification through mechanical calibration kit, or Electronic Calibration Module *supplied with VNA purchase*
• Calibration Modules must calibrate both Type-N connectors and 3.5 connectors separately.
• Automation software for calibration to include no proprietary information.
• Built-in Display
• No external hard drive requirements
• Any/all additional cables and connectors required to connect to either sex of Type-N
• Any/all additional cable and connectors required to connect to either sex of 3.5mm connections.
File details come from the government source that posted it. Updated .